--- hddtemp-0.3-beta15.orig/doc/hddtemp.8
+++ hddtemp-0.3-beta15/doc/hddtemp.8
@@ -57,6 +57,10 @@
 .TP
 .B \-f, \-\-file=\fIfile\fI
 Specify the database file to use.
+.B \-F, \-\-foreground
+.TP
+Don't fork into the background even in daemon mode.  This is useful
+when running under a process supervisor.
 .TP
 .B \-l, \-\-listen=\fIaddr\fR
 Listen on a specific address.  \fIaddr\fR is a string containing a
@@ -96,7 +100,7 @@
 .SH "DRIVE DATABASE"
 If you know your drive has a temperature sensor but it is being
 reported unsupported, tell me which model and which manufacturer it
-is, and/or just add a new entry in /usr/share/misc/hddtemp.db.  Each
+is, and/or just add a new entry in /etc/hddtemp.db.  Each
 line of hddtemp.db is either a comment, a blank line or a line
 containing:
 .TP
--- hddtemp-0.3-beta15.orig/README
+++ hddtemp-0.3-beta15/README
@@ -28,10 +28,7 @@
 INFORMATION
 ===========
 hddtemp accesses to the SATA disks via ATA pass-through commands (defined in 
-T10/04-262r7). At the time of writing (kernel 2.6.11-rc5 has just been 
-released), kernels doesn't have support for ATA pass-through. You have to 
-update the libata driver with a newer version that could be found on:
-http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/
+T10/04-262r7). Only kernel >= 2.6.16 have this support.
 
 In daemon mode, hddtemp doesn't allow too much query at a time. If the interval
 between two query is inferior to 1 minute, hddtemp will give the previous value
--- hddtemp-0.3-beta15.orig/debian/changelog
+++ hddtemp-0.3-beta15/debian/changelog
@@ -0,0 +1,1114 @@
+hddtemp (0.3-beta15-33) unstable; urgency=medium
+
+  * Update the description (closes: #401428).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  4 Dec 2006 06:04:38 +0100
+
+hddtemp (0.3-beta15-32) unstable; urgency=low
+
+  * Updated German debconf template. Thanks to Erik Schanze (closes:
+    bug#397209).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 27 Nov 2006 14:42:32 +0100
+
+hddtemp (0.3-beta15-31) unstable; urgency=low
+
+  * Remove the suggest on gkrellm-hddtemp (closes: bug#398938).
+  * Updated Swedish debconf template. Thanks to Daniel Nylander (closes:
+    bug#398788).
+  * Added Swedish translation. Thanks to Daniel Nylander (closes:
+    bug#398787).
+  * Added and LSB header to the init script.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 27 Nov 2006 12:14:49 +0100
+
+hddtemp (0.3-beta15-30) unstable; urgency=medium
+
+  * Remove a space in the printed temperature when a disk is not present
+    in hddtemp.db.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 19 Oct 2006 14:50:09 +0200
+
+hddtemp (0.3-beta15-29) unstable; urgency=medium
+
+  * Also consider field 194 as a temperature in Celsius if the disk
+    is not present in hddtemp.db in daemon mode (closes: bug#391870).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  9 Oct 2006 16:42:47 +0200
+
+hddtemp (0.3-beta15-28) unstable; urgency=medium
+
+  * Always consider field 194 as a temperature in Celsius if the disk
+    is not present in hddtemp.db (closes: bug#387102, #386943, #389290,
+    #387403, #389309, #387544)
+  * Updated Czech debconf template. Thanks to Miroslav Jezbera (closes:
+    bug#389244).
+  * Set urgency to medium as I really want to get this version in etch
+    (and not bother with roughly one bug report per week).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  4 Oct 2006 01:53:51 +0200
+
+hddtemp (0.3-beta15-27) unstable; urgency=low
+
+  * Depends on lsb-base (>= 3.0-3) (closes: bug#386859).
+  * Added support for Western Digital WD2000JD (closes: bug#385604).
+  * Added support for Seagate NL35 SATA (closes: bug#385187).
+  * Added support for ST3160811AS (closes: bug#385335).
+  * Added support for WD400BB-00DKA0 (closes: bug#386857).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 11 Sep 2006 00:13:15 +0200
+
+hddtemp (0.3-beta15-26) unstable; urgency=low
+
+  * Added support for SAMSUNG HD160JJ. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 26 Aug 2006 22:29:13 +0200
+
+hddtemp (0.3-beta15-25) unstable; urgency=low
+
+  * Added support for WD1200JD-00FYB0 (closes: bug#383692). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 20 Aug 2006 15:00:15 +0200
+
+hddtemp (0.3-beta15-24) unstable; urgency=low
+
+  * Updated Spanish debconf template. Thanks to Carlos Valdivia YagÃ¼e (closes:
+    bug#383374:).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 17 Aug 2006 10:25:43 +0200
+
+hddtemp (0.3-beta15-23) unstable; urgency=low
+
+  * Added support for WDC WD3200SD-01KNB0 (closes: bug#382449).
+  * Added support for ST3400633 (closes: bug#382546).
+  * Added various Seagate 7200.10 drives, patch by Petr Vandrovec (closes:
+    bug#382490).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 11 Aug 2006 21:46:40 +0200
+
+hddtemp (0.3-beta15-22) unstable; urgency=low
+
+  * Added support for ST3320620AS (closes: bug#382300).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 10 Aug 2006 11:24:58 +0200
+
+hddtemp (0.3-beta15-21) unstable; urgency=low
+
+  * Added support for Toshiba MK1032GSX (closes: bug#382130).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  9 Aug 2006 19:27:36 +0200
+
+hddtemp (0.3-beta15-20) unstable; urgency=low
+
+  * Added support for Maxtor 6V300F0 (closes: bug#382071).
+  * Added support for Seagate ST98823AS (closes: bug#382009).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  8 Aug 2006 18:28:24 +0200
+
+hddtemp (0.3-beta15-19) unstable; urgency=low
+
+  * Added support for ST3250624AS (closes: bug#381837).
+  * Added support for WDC WD3200KS-00PFB0 (closes: bug#381837).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  7 Aug 2006 23:38:39 +0200
+
+hddtemp (0.3-beta15-18) unstable; urgency=low
+
+  * Added support for MHV2060AH. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  5 Aug 2006 21:19:56 +0200
+
+hddtemp (0.3-beta15-17) unstable; urgency=low
+
+  * Added support for WDC WD1500ADFD-00NLR0 (closes: bug#381403). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  5 Aug 2006 17:00:30 +0200
+
+hddtemp (0.3-beta15-16) unstable; urgency=low
+
+  * Updated Japanese debconf template. Thanks to Kenshi Muto (closes:
+    bug#379945).
+  * Added support for ST3808110AS and ST3160812AS (closes: bug#380478).
+  * Added support for ST3160812A (closes: bug#379701).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 30 Jul 2006 22:54:13 +0200
+
+hddtemp (0.3-beta15-15) unstable; urgency=low
+
+  * Added support for WDC WD2500JD-75HBB0 (closes: bug#379024). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 20 Jul 2006 21:47:04 +0200
+
+hddtemp (0.3-beta15-14) unstable; urgency=low
+
+  * Use lsb init-functions in init script. Thanks to Benjamin Leipold for the
+    patch (closes: bug#378118).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 14 Jul 2006 15:08:39 +0200
+
+hddtemp (0.3-beta15-13) unstable; urgency=low
+
+  * Added support for Toshiba MK8032GSX (Closes: #375486).
+  * Update the minimum kernel version (2.6.16) necessary to support
+    SATA in README.
+  * Print all warning/messages to stderr.
+  * Applied patch by Andras Korn (Closes: #374796) to allow the hddtemp
+    daemon to stay in the foreground.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 29 Jun 2006 15:11:47 +0200
+
+hddtemp (0.3-beta15-12) unstable; urgency=low
+
+  * Added Dutch debconf translation, thanks to Kurt De Bree (closes: 
+    bug#370072).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  3 Jun 2006 19:45:21 +0200
+
+hddtemp (0.3-beta15-11) unstable; urgency=low
+
+  * Updated Danish debconf template. Thanks to Claus Hindsgaul (closes:
+    bug#368045).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 19 May 2006 17:25:32 +0000
+
+hddtemp (0.3-beta15-10) unstable; urgency=low
+
+  * Updated French debconf translation, thanks to Jean-Luc Coulon (closes: 
+    bug#367540).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 16 May 2006 21:42:39 +0200
+
+hddtemp (0.3-beta15-9) unstable; urgency=low
+
+  * debian/templates: Changed How often into in interval. (closes: bug#367382).
+  * debian/templates: fixed the templates to make lintian happy.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 15 May 2006 20:21:49 +0200
+
+hddtemp (0.3-beta15-8) unstable; urgency=low
+
+  * Added support for SAMSUNG HD300LJ (closes: bug#367250). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 14 May 2006 20:08:31 +0200
+
+hddtemp (0.3-beta15-7) unstable; urgency=low
+
+  * Added support for HDS722516VLSA80 (closes: bug#366742).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 11 May 2006 05:46:24 +0200
+
+hddtemp (0.3-beta15-6) unstable; urgency=low
+
+  * Added support for FUJITSU MHV2100BH (closes: bug#366388).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 10 May 2006 06:29:54 +0200
+
+hddtemp (0.3-beta15-5) unstable; urgency=low
+
+  * Added support for WDC WD740GD-00FLA1 (closes: bug#366021). 
+  * Bumped Standards-Version to 3.7.2 (no changes).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  4 May 2006 18:38:15 +0200
+
+hddtemp (0.3-beta15-4) unstable; urgency=low
+
+  * Fix a crash in daemon (syslog) mode when the hard disk is not known
+    (closes: bug#365605).
+  * Added support for WD1200JB-00REA0.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  3 May 2006 20:27:11 +0200
+
+hddtemp (0.3-beta15-3) unstable; urgency=low
+
+  * Added support for WDC WD800JD-75JNC0 (closes: bug#365359).
+  * Added support for WDC WD2500KS and WDC WD2500YD.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  2 May 2006 21:49:37 +0200
+
+hddtemp (0.3-beta15-2) unstable; urgency=low
+
+  * Updated database for Maxtors MaxLineIII series drives (closes: 
+    bug#365011).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 27 Apr 2006 14:45:22 +0200
+
+hddtemp (0.3-beta15-1) unstable; urgency=low
+
+  * New upstream version. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 27 Apr 2006 05:25:06 +0200
+
+hddtemp (0.3-beta14-12) unstable; urgency=low
+
+  * Added Portuguese translation, thanks to Miguel Figueire (closes: 
+    bug#361505).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 11 Apr 2006 00:38:51 +0200
+
+hddtemp (0.3-beta14-11) unstable; urgency=low
+
+  * Added support for WDC WD2500PD-00FZB1, WDC WD2500SD-01KCB0, WDC
+    WD1200JD-00HBC0 and WDC WD4000YR-01PLB0 (closes: bug#357804).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 25 Mar 2006 20:29:42 +0100
+
+hddtemp (0.3-beta14-10) unstable; urgency=low
+
+  * Use F for fahrenheit.
+  * Added support for Hitachi DK23EA-20B (closes: bug#355763).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 18 Mar 2006 11:39:20 +0100
+
+hddtemp (0.3-beta14-9) unstable; urgency=low
+
+  * Update hddtemp.db (closes: bug#355469). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  6 Mar 2006 00:40:35 +0100
+
+hddtemp (0.3-beta14-8) unstable; urgency=low
+
+  * Don't flood syslog if the system clock wraps (closes: bug#354260). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 24 Feb 2006 21:32:36 +0100
+
+hddtemp (0.3-beta14-7) unstable; urgency=low
+
+  * Correctly initialize the structure dsk. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  4 Feb 2006 22:01:07 +0100
+
+hddtemp (0.3-beta14-6) unstable; urgency=low
+
+  * Added support for TOSHIBA MK4026GAX.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 11 Dec 2005 21:13:06 +0100
+
+hddtemp (0.3-beta14-5) unstable; urgency=low
+
+  * Added Swedish translation of hddtemp. Thanks to Daniel Nylander (close:
+    bug#337117).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  3 Nov 2005 01:56:26 +0100
+
+hddtemp (0.3-beta14-4) unstable; urgency=low
+
+  * Fixed the package device patch.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 27 Oct 2005 03:18:43 +0200
+
+hddtemp (0.3-beta14-3) unstable; urgency=low
+
+  * Don't try to read temperature from packet devices drives (closes:
+    bug#316750, bug#335571).
+  * Verify the response length when calling modesense (closes: 
+    bug#278345).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 27 Oct 2005 01:02:21 +0200
+
+hddtemp (0.3-beta14-2) unstable; urgency=low
+
+  * Added Swedish debconf translation. Thanks to Daniel Nylander (closes:
+    bug#333713).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 14 Oct 2005 11:22:05 +0200
+
+hddtemp (0.3-beta14-1) unstable; urgency=low
+
+  * New upstream version. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 21 Sep 2005 14:48:43 +0200
+
+hddtemp (0.3-beta13-23) unstable; urgency=low
+
+  * Added SAMSUNG SP2014N disk to the database.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 14 Sep 2005 11:27:22 +0200
+
+hddtemp (0.3-beta13-22) unstable; urgency=low
+
+  * Updated hddtemp.db (closes: bug#326180, bug#326181). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  6 Sep 2005 03:51:29 +0200
+
+hddtemp (0.3-beta13-21) unstable; urgency=low
+
+  * Added TOSHIBA MK4026GAX disk to the database (closes: bug#325702). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 31 Aug 2005 11:16:55 +0200
+
+hddtemp (0.3-beta13-20) unstable; urgency=low
+
+  * Added Arabic debconf translation. Thanks to Mohammed AdnÃ¨ne Trojette 
+    (closes: bug#320766).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  1 Aug 2005 15:40:56 +0200
+
+hddtemp (0.3-beta13-19) unstable; urgency=low
+
+  * Fixed DISKS_NOPROBE when no other disks are detected.
+  * Added a logcheck rule to ignore sleeping drives (closes: bug#316613).
+  * Bumped Standards-Version to 3.6.2 (no changes).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  6 Jul 2005 19:15:16 +0200
+
+hddtemp (0.3-beta13-18) unstable; urgency=low
+
+  * Added DISKS_NOPROBE option to the /etc/default/hddtemp (closes:
+    bug#316270).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 29 Jun 2005 22:13:53 +0200
+
+hddtemp (0.3-beta13-17) unstable; urgency=low
+
+  * Updated database.
+  * Added support for Western Digital Caviar WD800BB (closes: bug#312247).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  9 Jun 2005 23:16:25 +0200
+
+hddtemp (0.3-beta13-16) unstable; urgency=low
+
+  * Updated Vietnamese debconf translation. Thanks to Clytie Siddall (closes:
+    bug#311893).
+  * Fixed a typo in the debconf template. Thanks to Clytie Siddall (closes: 
+    bug#311894).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  4 Jun 2005 17:03:31 +0200
+
+hddtemp (0.3-beta13-15) unstable; urgency=low
+
+  * Updated German debconf translation. Thanks to Erik Schanze (closes:
+    bug#311716).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri,  3 Jun 2005 00:41:00 +0200
+
+hddtemp (0.3-beta13-14) unstable; urgency=low
+
+  * Added SV4012H to the database. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 24 May 2005 00:54:01 +0200
+
+hddtemp (0.3-beta13-13) unstable; urgency=low
+
+  * Added WD800BB-00JHA0 to the database (closes: bug#310301). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 23 May 2005 01:08:43 +0200
+
+hddtemp (0.3-beta13-12) unstable; urgency=low
+
+  * Added HDS722512VLAT80 to the database (closes: bug#309011).
+  * Added Vietnamese debconf translation. Thanks to Clytie Siddall (closes:
+    bug#309451).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 16 May 2005 16:58:00 +0200
+
+hddtemp (0.3-beta13-11) unstable; urgency=low
+
+  * Added WD2500JB-55GVA0 to the database (closes: bug#307673). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  4 May 2005 23:47:12 +0200
+
+hddtemp (0.3-beta13-10) unstable; urgency=high
+
+  * Daemonization fixed (closes: bug#307113).
+  * Added HDS722525VLSA80 to the database (closes: bug#306691).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  2 May 2005 01:01:54 +0200
+
+hddtemp (0.3-beta13-9) unstable; urgency=low
+
+  * Remove /etc/logcheck.ignore.workstation/hddtemp in postinst. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 22 Apr 2005 18:35:58 +0200
+
+hddtemp (0.3-beta13-8) unstable; urgency=low
+
+  * Really applied Danish debconf template (closes: bug#302353).
+  * Updated Czech debconf template. Thanks to Miroslav Jezbera (closes:
+    bug#304716).
+  * Updated French debconf template. Thanks to Jean-Luc Coulon (closes:
+    bug#303061).
+  * Added WD2000JB-32EVA0 to hddtemp.deb (closes: bug#302760).
+  * Fixed logcheck ignore files (closes: bug#304110).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 15 Apr 2005 06:26:34 +0200
+
+hddtemp (0.3-beta13-7) unstable; urgency=low
+
+  * Updated Danish debconf template. Thanks to Claus Hindsgaul (closes:
+    bug#302353).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 15 Apr 2005 06:15:19 +0200
+
+hddtemp (0.3-beta13-6) unstable; urgency=low
+
+  * Updated Japanese debconf template. Thanks to Kenshi Muto (closes:
+    bug#302322). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 31 Mar 2005 12:26:56 +0200
+
+hddtemp (0.3-beta13-5) unstable; urgency=low
+
+  * Fixed French debconf template. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 30 Mar 2005 22:59:34 +0200
+
+hddtemp (0.3-beta13-4) unstable; urgency=low
+
+  * debian/templates: s/gkrellm-hdtemp/gkrellm/g (closes: bug#302178).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 30 Mar 2005 15:21:10 +0200
+
+hddtemp (0.3-beta13-3) unstable; urgency=medium
+
+  * Don't listen on socket if only syslog is choosen in debconf. Thanks to
+    Mario Holbe for the patch (closes: bug#302065).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 30 Mar 2005 01:25:04 +0200
+
+hddtemp (0.3-beta13-2) unstable; urgency=medium
+
+  * Try to detect cdrom drives using the ide-scsi driver (closes: 
+    bug#302061).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 30 Mar 2005 00:38:49 +0200
+
+hddtemp (0.3-beta13-1) unstable; urgency=medium
+
+  * New upstream version which contains the same code as in the previous
+    Debian package.
+  * Use SG_IO only when available (closes: bug#300679).
+  * Added syslog option in debconf (closes: bug#300332).
+  * Fixed the manpage (closes: bug#300332).
+  * Only disable SCSI exceptions if they are already enabled (closes:
+    bug#278345).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 29 Mar 2005 15:56:03 +0200
+
+hddtemp (0.3-beta12-16) unstable; urgency=low
+
+  * Verify SATA magics in the ATA pass through subroutine. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 27 Feb 2005 16:51:48 +0100
+
+hddtemp (0.3-beta12-15) unstable; urgency=low
+
+  * Change the way SATA disks are detected, so that there is no more 
+    SCSI errors with SCSI disks.
+  * Print SCSI disks name in a smarter way.
+  * Updated database.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 25 Feb 2005 22:59:36 +0100
+
+hddtemp (0.3-beta12-14) unstable; urgency=low
+
+  * Converted SCSI subroutines to SG_IO (closes: bug#235422, bug#275612,
+    bug#292205).
+  * Added support for SATA (closes: bug#227409). A kernel patch for
+    SATA is still need (see /usr/share/doc/hddtemp/README).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 25 Feb 2005 02:16:57 +0100
+
+hddtemp (0.3-beta12-13) unstable; urgency=low
+
+  * Don't display an error message if /proc/sys/dev/cdrom/info doesn't 
+    exist (systems without CDROM drives) (closes: bug#295814).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 18 Feb 2005 12:42:18 +0100
+
+hddtemp (0.3-beta12-12) unstable; urgency=low
+
+  * Added Hitachi Deskstar 7K80 40G and 80GB disks.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun,  6 Feb 2005 17:49:15 +0100
+
+hddtemp (0.3-beta12-11) unstable; urgency=low
+
+  * Uses /proc/sys/dev/cdrom/info instead of hardcoded paths to detect CDROM
+    drives (closes: bug#293542). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri,  4 Feb 2005 11:15:37 +0100
+
+hddtemp (0.3-beta12-10) unstable; urgency=low
+
+  * Added a README.Debian to explain why the init script could not found 
+    some disks.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 25 Jan 2005 16:46:53 +0100
+
+hddtemp (0.3-beta12-9) unstable; urgency=low
+
+  * Updated Brasilian translation. Thanks to Tiago Bortoletto Vaz (closes:
+    bug#283832).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  1 Dec 2004 21:40:42 +0100
+
+hddtemp (0.3-beta12-8) unstable; urgency=low
+
+  * Updated hddtemp.db.
+  * Added MHT2060AH drive (closes: bug#280805).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  1 Dec 2004 19:19:37 +0100
+
+hddtemp (0.3-beta12-7) unstable; urgency=low
+
+  * Updated German debconf translation. Thanks to Erik Schanze (closes:
+    bug#282280). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 21 Nov 2004 16:22:41 +0100
+
+hddtemp (0.3-beta12-6) unstable; urgency=low
+
+  * Don't abord the script if /dev/cdrom doesn't exists.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 25 Oct 2004 14:46:42 +0000
+
+hddtemp (0.3-beta12-5) unstable; urgency=low
+
+  * Added a patch to allow temperatures to be logged to syslog (closes:
+    bug#271508).
+  * Added hddtemp-all.sh to contribs. Thanks to Javier FernÃ¡ndez-Sanguino
+    PeÃ±a (closes: bug#276444).
+  * /etc/init.d/hddtemp: skip CD and DVD drives.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 24 Oct 2004 17:30:34 +0200
+
+hddtemp (0.3-beta12-4) unstable; urgency=low
+
+  * Print "done." in the init script when stopping hddtemp (closes: 
+    bug#275952).
+  * Updated hddtemp.db with the latest available version.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 12 Oct 2004 10:10:01 +0100
+
+hddtemp (0.3-beta12-3) unstable; urgency=medium
+
+  * Added support for WDC 200GB SE (closes: bug#275105).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  7 Oct 2004 21:01:15 +0200
+
+hddtemp (0.3-beta12-2) unstable; urgency=low
+
+  * Added support for Maxtor MaXLine Plus II 250GB (closes: bug#274596).
+  * Added support for Travelstar 5K80 series (closes: bug#274671).
+  * Removed init message when the daemon is disabled.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun,  3 Oct 2004 19:40:23 +0200
+
+hddtemp (0.3-beta12-1) unstable; urgency=low
+
+  * New upstream version.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  2 Oct 2004 01:47:19 +0200
+
+hddtemp (0.3-beta11-17) unstable; urgency=low
+
+  * Detect sleeping drives in the init script (closes: bug#269462).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  1 Sep 2004 18:49:35 +0200
+
+hddtemp (0.3-beta11-16) unstable; urgency=low
+
+  * Added support for Samsung SpinPoint PL40 serie.
+  * Added support for Western Digital 250GB Special Edition 8MB (closes:
+    bug#269342).
+  * Added support for Maxtor DiamondMax Plus 40 drives (closes: 
+    bug#269346).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  1 Sep 2004 11:29:55 +0200
+
+hddtemp (0.3-beta11-15) unstable; urgency=low
+
+  * Added Danish debconf translation. Thanks to Claus Hindsgaul (closes:
+    bug#267551).
+  * Added support for Western Digital 160GB Special Edition 8MB (closes: 
+    bug#267492).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 31 Aug 2004 11:23:43 +0200
+
+hddtemp (0.3-beta11-14) unstable; urgency=medium
+
+  * Let the kernel decide if we can access the device or not (closes:
+    bug#262742).
+  * Added an option to wake-up the driver if need (closes: #255308).
+  * Added IPv6 support.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 16 Aug 2004 15:36:00 +0200
+
+hddtemp (0.3-beta11-13) unstable; urgency=low
+
+  * Added Czech debconf translation. Thanks to Miroslav Jezbera (closes:
+    bug#261284).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 31 Jul 2004 16:18:17 +0200
+
+hddtemp (0.3-beta11-12) unstable; urgency=low
+
+  * Fixed manpage installation (closes: bug#258048, #258101).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  8 Jul 2004 02:08:00 +0200
+
+hddtemp (0.3-beta11-11) unstable; urgency=low
+
+  * Print WARNING messages on stderr (closes: bug#254940).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 18 Jun 2004 00:17:08 +0200
+
+hddtemp (0.3-beta11-10) unstable; urgency=low
+
+  * If a debconf answer is empty, ignore it (closes: bug#247026). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  4 May 2004 01:48:26 +0200
+
+hddtemp (0.3-beta11-9) unstable; urgency=low
+
+  * The "Welcome to the 10 new EU members" release.
+  * Added --retry parameter when calling start-stop-daemon (closes:
+    bug#246028).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  1 May 2004 00:49:45 +0200
+
+hddtemp (0.3-beta11-8) unstable; urgency=low
+
+  * Added support for Samsung P80 SATA drives (closes: bug#243464).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 13 Apr 2004 17:34:30 +0200
+
+hddtemp (0.3-beta11-7) unstable; urgency=low
+
+  * Added support for Hitachi Deskstar 7K250 (closes: bug#241493).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 11 Apr 2004 16:37:51 +0200
+
+hddtemp (0.3-beta11-6) unstable; urgency=low
+
+  * Added support for Western Digital WD1600JB-00FUA0 disk (closes: 
+    bug#237983).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 16 Mar 2004 13:14:19 +0100
+
+hddtemp (0.3-beta11-5) unstable; urgency=low
+
+  * Minor changes to debian/postinst script.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun,  8 Feb 2004 00:27:59 +0100
+
+hddtemp (0.3-beta11-4) unstable; urgency=low
+
+  * Updated description (closes: bug#230507).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun,  1 Feb 2004 17:37:58 +0100
+
+hddtemp (0.3-beta11-3) unstable; urgency=low
+
+  * Don't include asm headers on architectures that don't support 
+    backtracing. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 25 Jan 2004 21:57:49 +0100
+
+hddtemp (0.3-beta11-2) unstable; urgency=low
+
+  * Included upstream ChangeLog (closes: bug#226329). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  6 Jan 2004 03:16:37 +0100
+
+hddtemp (0.3-beta11-1) unstable; urgency=low
+
+  * New upstream version.
+  * Updated the database to version 03C.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri,  2 Jan 2004 10:05:21 +0100
+
+hddtemp (0.3-beta10-2) unstable; urgency=low
+
+  * Disable backtracing on non-i386 architectures. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 15 Dec 2003 09:19:48 +0100
+
+hddtemp (0.3-beta10-1) unstable; urgency=low
+
+  * New upstream version.
+  * Updated debian/copyright.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 15 Dec 2003 08:24:37 +0100
+
+hddtemp (0.3-beta9-2) unstable; urgency=low
+
+  * Moved ja.po in the right directory.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 12 Dec 2003 09:31:19 +0100
+
+hddtemp (0.3-beta9-1) unstable; urgency=low
+
+  * New upstream version.
+  * Updated the database to version 03B.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 12 Dec 2003 09:21:16 +0100
+
+hddtemp (0.3-beta8-7) unstable; urgency=low
+
+  * Added po debconf translations. Thanks to Kenshi Muto. (closes:
+    bug#211954)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 21 Sep 2003 14:03:19 +0200
+
+hddtemp (0.3-beta8-6) unstable; urgency=low
+
+  * Remove the link to /usr/sbin/hddtemp in /usr/bin when removing the 
+    package (closes: bug#210609). 
+  * Updated Policy standard compliance to 3.6.1 (no changes).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 12 Sep 2003 16:06:56 +0200
+
+hddtemp (0.3-beta8-5) unstable; urgency=low
+
+  * Removed the single-quoting around the -s parameter in the init script
+    (closes: bug#208542). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  3 Sep 2003 19:02:24 +0200
+
+hddtemp (0.3-beta8-4) unstable; urgency=medium
+
+  * Don't modify the config file in the config script (closes: bug#203583).
+  * Urgency set to medium as the bug breaks upgrade.
+  * The init script also stop manually started daemons.
+  * Added a small patch to make sure hddtemp could not be started in daemon
+    mode by a normal user even if it is SUID root.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  2 Sep 2003 14:52:03 +0200
+
+hddtemp (0.3-beta8-3) unstable; urgency=low
+
+  * Don't strip the comments from the config file when installing the 
+    package.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  1 Sep 2003 18:51:33 +0200
+
+hddtemp (0.3-beta8-2) unstable; urgency=low
+
+  * Fixed a typo in the manpage. Thanks to Carlos Valdivia YagÃ¼e. (Closes:
+    bug#205947).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 19 Aug 2003 09:19:04 +0200
+
+hddtemp (0.3-beta8-1) unstable; urgency=low
+
+  * New upstream version.
+  * Recoded the changelog in UTF-8.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 12 Aug 2003 01:14:19 +0200
+
+hddtemp (0.3-beta7-6) unstable; urgency=low
+
+  * Fixed config and postinst scripts (closes: bug#203583). 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  5 Aug 2003 09:16:11 +0200
+
+hddtemp (0.3-beta7-5) unstable; urgency=low
+
+  * Fixed a typo in /etc/init.d/hddtemp (closes: bug#203441).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 30 Jul 2003 06:29:45 +0200
+   
+hddtemp (0.3-beta7-4) unstable; urgency=low
+
+  * Changed the DAEMON parameter in /etc/default/hddtemp to RUN_DAEMON
+    (closes: bug#203107).
+  * Updated the database to version 036.
+  * Updated Policy standard compliance to 3.6.0.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 28 Jul 2003 02:32:00 +0200
+
+hddtemp (0.3-beta7-3) unstable; urgency=low
+
+  * Updated es debconf translations. Thanks to Carlos Valdivia YagÃ¼e.
+    (closes: bug#198450).
+  * Updated the database to version 033.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 24 Jun 2003 01:12:00 +0200
+
+hddtemp (0.3-beta7-2) unstable; urgency=low
+
+  * Updated fr debconf translations. Thanks to Michel Grentzin.
+    (closes: bug#198155)
+  * Added pt_BR debconf translations. Thanks to Andre Luis Lopes.
+    (closes: bug#198350)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 22 Jun 2003 02:55:59 +0200
+
+hddtemp (0.3-beta7-1) unstable; urgency=low
+
+  * New upstream version with i18n support.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 16 Jun 2003 22:54:25 +0200
+
+hddtemp (0.3-beta6-9) unstable; urgency=low
+
+  * Updated the database to version 032.
+  * Unmark some untranslatable strings in the master templates file. (closes: 
+    bug#197642).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 16 Jun 2003 19:32:07 +0200
+
+hddtemp (0.3-beta6-8) unstable; urgency=low
+
+  * Updated the database to version 030.
+  * Updated fr debconf translations. Thanks to Michel Grentzin.
+    (closes: bug#196765)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon,  9 Jun 2003 20:37:46 +0200
+
+hddtemp (0.3-beta6-7) unstable; urgency=low
+
+  * Changed priority for debconf questions to more reasonable values.
+  * Updated the database to version 02F.
+  * Updated Policy standard compliance to 3.5.10.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 22 May 2003 23:43:24 +0200
+
+hddtemp (0.3-beta6-6) unstable; urgency=low
+
+  * Don't mark /etc/default/hddtemp as a conffile, handle it entirely
+    in maintainer scripts (closes: bug#193466).
+  * Pass --ok-nodo argument to start-stop-daemon in init script when
+    stopping hddtemp (closes: bug#193622).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 18 May 2003 13:09:48 +0200
+
+hddtemp (0.3-beta6-5) unstable; urgency=low
+
+  * Updated the database to version 02E.
+  * Don't save the fact that the daemon is running or not in debconf, but
+    rather in /etc/default/hddemp.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 11 May 2003 15:06:47 +0200
+
+hddtemp (0.3-beta6-4) unstable; urgency=low
+
+  * Updated the upstream project homepage in debian/copyright (closes:
+    bug#190960).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 27 Apr 2003 17:46:53 +0200
+
+hddtemp (0.3-beta6-3) unstable; urgency=low
+
+  * Updated the upstream project homepage in the description (closes: 
+    bug#190929).
+  * Updated the database to version 02B.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 27 Apr 2003 11:40:14 +0200
+
+hddtemp (0.3-beta6-2) unstable; urgency=low
+
+  * Added port and separator options to /etc/default/hddtemp.
+  * Added -l option to the manpage.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  3 Apr 2003 09:44:58 +0200
+
+hddtemp (0.3-beta6-1) unstable; urgency=low
+
+  * New upstream version.
+  * Updated database.
+  * Updated Policy standard compliance to 3.5.9.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  2 Apr 2003 22:54:01 +0200
+
+hddtemp (0.3-beta5-1) unstable; urgency=low
+
+  * New upstream version.
+  * Updated database.
+  * Added an option to listen on a specific interface (closes: bug#186062).
+  * Changed name displayed by /etc/init.d/hddtemp (closes: bug#187041).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue,  1 Apr 2003 02:24:53 +0200
+
+hddtemp (0.3-beta4-2) unstable; urgency=low
+
+  * The "I have uploaded the wrong version" release.
+  * Fixed a bug in i18n.c. (closes: bug#185328).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 18 Mar 2003 20:32:03 +0100
+
+hddtemp (0.3-beta4-1) unstable; urgency=low
+
+  * New upstream version.
+  * Updated database.
+  * Improved /etc/init.d/hddtemp and added a config file in
+    /etc/default (Closes: bug#183843). Thanks to Greg Miller.
+  * Fixed a bug in i18n.c.
+  * Added homepage and author to the description.
+  * Debconf templates are now managed with po-debconf.
+  * Uses debian/compat instead of DH_COMPAT.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 17 Mar 2003 00:29:12 +0100
+
+hddtemp (0.3-beta3-3) unstable; urgency=low
+
+  * Added patch to allow local port reuse in TIME_WAIT. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 25 Jan 2003 01:43:21 +0100
+
+hddtemp (0.3-beta3-2) unstable; urgency=low
+
+  * Don't fail at postinst stage if daemon failed to start. (closes:
+    bug#177660)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Fri, 24 Jan 2003 21:21:41 +0100
+
+hddtemp (0.3-beta3-1) unstable; urgency=low
+
+  * New upstream version including all the previous patches plus some fixes.
+  * Updated database.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 19 Jan 2003 21:27:30 +0100
+
+hddtemp (0.3-beta2-4) unstable; urgency=low
+
+  * Added patch from Julien Blache to fix a lot of spelling mistakes. 
+    Thanks !
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 19 Jan 2003 09:55:47 +0100
+
+hddtemp (0.3-beta2-3) unstable; urgency=low
+
+  * Added an option to print only the temperature. Thanks to Julien Blache
+    for the patch. (closes: bug#176395)
+  * Fixed some warnings introduced by gcc-3.2.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 12 Jan 2003 12:30:49 +0100
+
+hddtemp (0.3-beta2-2) unstable; urgency=low
+
+  * Merged hddtemp and hddtemp-daemon and added a debconf question 
+    because the package was refused by the ftpmaster.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed,  8 Jan 2003 21:48:09 +0100
+
+hddtemp (0.3-beta2-1) unstable; urgency=low
+
+  * New beta version.
+  * Added daemon mode init script to the new package hddtemp-daemon.
+  * Updated Policy standard compliance to 3.5.8.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  4 Jan 2003 10:04:16 +0100
+
+hddtemp (0.2-18) unstable; urgency=low
+
+  * Updated database (version 021).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 28 Dec 2002 16:59:39 -0500
+
+hddtemp (0.2-17) unstable; urgency=low
+
+  * Fixed copyright file.
+  * Removed debian/conffiles, this is handled by dh_installdeb automatically ; 
+    otherwise we end up with each conffile being listed twice...
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 17 Dec 2002 01:39:02 +0100
+
+hddtemp (0.2-16) unstable; urgency=low
+
+  * Updated database (version 01f).
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 17 Dec 2002 00:40:07 +0100
+
+hddtemp (0.2-15) unstable; urgency=low
+
+  * Updated database (version 01D).
+  * Added disk model IC35L040AVVN07-0 (closes: bug#172117). Thanks to Henrique 
+    de Moraes Holschuh.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat,  7 Dec 2002 16:47:41 +0100
+
+hddtemp (0.2-14) unstable; urgency=low
+
+  * Corrected a bug affecting the display of the degree sign.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu, 26 Sep 2002 01:29:10 +0200
+
+hddtemp (0.2-13) unstable; urgency=low
+
+  * Added support for other encodings than iso-8859-1. (closes:bug#158106)
+  * debian/hddtemp.1: corrected description of -f option.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 25 Sep 2002 14:26:20 +0200
+
+hddtemp (0.2-12) unstable; urgency=low
+
+  * Updated database.
+  * Updated Policy standard compliance to 3.5.7 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 11 Sep 2002 14:21:49 +0200
+
+hddtemp (0.2-11) unstable; urgency=low
+
+  * Updated database. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Wed, 14 Aug 2002 23:01:31 +0200
+
+hddtemp (0.2-10) unstable; urgency=low
+
+  * Updated database. (closes: bug#149313) 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 15 Jun 2002 00:00:48 +0200
+
+hddtemp (0.2-9) unstable; urgency=low
+
+  * Corrected a bug affecting the display of the degree sign on some systems.
+  (closes: bug#147136, #147138)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Tue, 11 Jun 2002 19:34:03 +0200
+
+hddtemp (0.2-8) unstable; urgency=low
+
+  * Corrected debconf template. (closes: bug#148146)
+  * Updated HDD database.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 25 May 2002 17:11:16 +0200
+
+hddtemp (0.2-7) unstable; urgency=low
+
+  * Corrected the man page. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 19 May 2002 23:54:39 +0200
+
+hddtemp (0.2-6) unstable; urgency=low
+
+  * Updated HDD database. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 18 May 2002 13:33:02 +0200
+
+hddtemp (0.2-5) unstable; urgency=low
+
+  * Updated HDD database.
+  * Updated the man page. 
+
+ -- Aurelien Jarno <aurel32@debian.org>  Mon, 13 May 2002 06:40:08 +0200
+
+hddtemp (0.2-4) unstable; urgency=low
+
+  * Moved /usr/share/hddtemp/hddtemp.db to /etc/hddtemp.db as conffile.
+    (closes: bug#146738)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 12 May 2002 19:50:23 +0200
+
+hddtemp (0.2-3) unstable; urgency=low
+
+  * Added de debconf translations. 
+  * Updated HDD database.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sun, 12 May 2002 17:15:28 +0200
+
+hddtemp (0.2-2) unstable; urgency=low
+
+  * Fixed typos and erroneous statement in description. (closes: bug#146551)
+  * Fixed manpage. (closes: bug#146554)
+  * A symlink to /usr/bin is made when installing hddtemp SUID root.
+
+ -- Aurelien Jarno <aurel32@debian.org>  Sat, 11 May 2002 15:54:42 +0200
+
+hddtemp (0.2-1) unstable; urgency=low
+
+  * Initial Release. (closes: bug#145611)
+
+ -- Aurelien Jarno <aurel32@debian.org>  Thu,  9 May 2002 14:50:35 +0200
+
--- hddtemp-0.3-beta15.orig/debian/init
+++ hddtemp-0.3-beta15/debian/init
@@ -0,0 +1,91 @@
+#!/bin/sh
+#
+# skeleton	example file to build /etc/init.d/ scripts.
+#		This file should be used to construct scripts for /etc/init.d.
+#
+#		Written by Miquel van Smoorenburg <miquels@cistron.nl>.
+#		Modified for Debian GNU/Linux
+#		by Ian Murdock <imurdock@gnu.ai.mit.edu>.
+#
+# Version:	@(#)skeleton  1.8  03-Mar-1998  miquels@cistron.nl
+#
+
+### BEGIN INIT INFO
+# Provides:          hddtemp
+# Required-Start:    $syslog $network
+# Required-Stop:     $syslog $network
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: disk temperature monitoring daemon
+# Description:       hddtemp is a disk temperature monitoring daemon
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+NAME=hddtemp
+DAEMON=/usr/sbin/hddtemp
+DESC="disk temperature monitoring daemon"
+
+DISKS="/dev/hd? /dev/sr? /dev/sg? /dev/sd?"
+INTERFACE="0.0.0.0"
+PORT="7634"
+SEPARATOR="|"
+SYSLOG="0"
+
+# Reads config file (will override defaults above)
+[ -r /etc/default/hddtemp ] && . /etc/default/hddtemp
+
+if [ -n "$SYSLOG" -a "$SYSLOG" != "0" ] ; then
+	SYSLOG_ARG="-S $SYSLOG"
+fi
+
+if [ "$RUN_DAEMON" = "true" -o "$RUN_DAEMON" = "yes" ] ; then
+	DAEMON_ARG="-d -l $INTERFACE -p $PORT -s $SEPARATOR"
+fi
+
+[ -x "$DAEMON" ] || exit 0
+
+. /lib/lsb/init-functions
+
+case "$1" in
+  start)
+	# master switch
+  	if [ -n "$DAEMON_ARG" -o -n "$SYSLOG_ARG" ] ; then
+  		log_daemon_msg "Starting $DESC" "$NAME:"
+		CDROMS_LIST="$(grep "^drive name:" /proc/sys/dev/cdrom/info 2>/dev/null | sed -e 's/^drive name:\t//g' -e 's/\t/ \/dev\//g')"
+		CDROMS_LIST="$CDROMS_LIST $(grep -sl '^ide-scsi ' /proc/ide/hd*/driver | awk -F / '{ print "/dev/"$4 }')"
+        	for disk in $DISKS ; do
+			echo $CDROMS_LIST | grep -wq $disk && continue
+			echo $DISKS_NOPROBE | grep -wq $disk && continue
+			if /usr/sbin/hddtemp -wn $OPTIONS $disk 2>/dev/null | /bin/grep -q '^[0-9]\+$' ; then
+				DISKS_LIST="$DISKS_LIST $disk";
+			fi
+		done
+		if [ -n "$DISKS_LIST" ] || [ -n "$DISKS_NOPROBE" ] ; then
+			start-stop-daemon --start --quiet --exec $DAEMON -- $DAEMON_ARG $SYSLOG_ARG $OPTIONS $DISKS_NOPROBE $DISKS_LIST
+			ret=$?
+			log_progress_msg "$DISKS_NOPROBE$DISKS_LIST."
+			log_end_msg $ret
+		else
+			log_progress_msg "no disks with monitoring capability were found."
+			log_end_msg 0
+		fi
+	fi
+	;;
+  stop)
+	# master switch
+  	if [ "$RUN_DAEMON" = "true" -o "$RUN_DAEMON" = "yes" -o "$SYSLOG" != "0" ] ; then
+ 		log_daemon_msg "Stopping $DESC" "$NAME"
+		start-stop-daemon --stop --oknodo --exec $DAEMON --retry 30
+		log_end_msg $?
+	fi
+	;;
+  reload|restart|force-reload)
+	$0 stop && $0 start
+	;;
+  *)
+	echo "Usage: /etc/init.d/$NAME {start|stop|restart|force-reload}" >&2
+	exit 1
+	;;
+esac
+
+exit 0
--- hddtemp-0.3-beta15.orig/debian/docs
+++ hddtemp-0.3-beta15/debian/docs
@@ -0,0 +1,2 @@
+README
+TODO
--- hddtemp-0.3-beta15.orig/debian/config
+++ hddtemp-0.3-beta15/debian/config
@@ -0,0 +1,49 @@
+#!/bin/sh 
+# hddtemp package configuration script
+
+conffile="/etc/default/hddtemp"
+
+get_config_file()
+{
+	config_field=$1
+	db_field=$2
+	
+	if [ -f "$conffile" ] ; then
+   		VALUE="$(grep "^[ ]*$config_field" $conffile | sed -e "s/^$config_field *= *\"\(.*\)\"/\1/g")" 
+		if [ -n "$VALUE" ] ; then
+			db_set $db_field "$VALUE"
+		fi
+	fi		
+}
+
+# Source debconf library -- we have a Depends line
+# to make sure it is there...
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+if [ "$1" = configure -o "$1" = reconfigure ] ; then
+	db_input medium hddtemp/SUID_bit || true
+	
+	get_config_file SYSLOG hddtemp/syslog
+	db_input medium hddtemp/syslog || true
+	
+	get_config_file DAEMON hddtemp/daemon
+	get_config_file RUN_DAEMON hddtemp/daemon
+	db_input high hddtemp/daemon || true
+	
+	db_go
+	
+	db_get hddtemp/daemon
+	
+	if [ "$RET" = "true" ] ; then
+		get_config_file INTERFACE hddtemp/interface
+		db_input high hddtemp/interface || true
+		
+		get_config_file PORT hddtemp/port
+		db_input high hddtemp/port || true
+
+		db_go
+	fi
+fi
+
+exit 0
--- hddtemp-0.3-beta15.orig/debian/compat
+++ hddtemp-0.3-beta15/debian/compat
@@ -0,0 +1 @@
+4
--- hddtemp-0.3-beta15.orig/debian/control
+++ hddtemp-0.3-beta15/debian/control
@@ -0,0 +1,20 @@
+Source: hddtemp
+Section: utils
+Priority: extra
+Maintainer: Aurelien Jarno <aurel32@debian.org>
+Build-Depends: debhelper (>> 4.1.16), autotools-dev, gettext (>> 0.10.1)
+Standards-Version: 3.7.2
+
+Package: hddtemp
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base (>= 3.0-3)
+Suggests: ksensors
+Conflicts: ksensors (<< 0.7-8), gkrellm-hddtemp (<< 0.1-9)
+Description: Utility to monitor the temperature of your hard drive
+ hddtemp will give you the temperature of your PATA, SATA or SCSI hard 
+ drive by reading Self-Monitoring Analysis and Reporting Technology 
+ (S.M.A.R.T.) information (on drives that support this feature). Only 
+ modern hard drives have a temperature sensor.  
+ .
+  Author: Emmanuel Varagnat <hddtemp@guzu.net>
+  Homepage: http://www.guzu.net/linux/hddtemp.php
--- hddtemp-0.3-beta15.orig/debian/copyright
+++ hddtemp-0.3-beta15/debian/copyright
@@ -0,0 +1,26 @@
+This package was debianized by Aurelien Jarno <aurel32@debian.org> on
+Wed,  8 May 2002 01:40:30 +0200.
+
+It was downloaded from http://www.guzu.net/linux/hddtemp.php
+
+Upstream Author: Emmanuel Varagnat <hddtemp@guzu.net>
+
+Copyright: 2002, 2003 Emmanuel Varagnat
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License with
+  the Debian GNU/Linux distribution in file /usr/share/common-licenses/GPL;
+  if not, write to the Free Software Foundation, Inc., 51 Franklin St,
+  Fifth Floor, Boston, MA  02110-1301 USA
+
+ On Debian systems, the complete text of the GNU General Public
+ License, version 2, can be found in /usr/share/common-licenses/GPL-2.
--- hddtemp-0.3-beta15.orig/debian/rules
+++ hddtemp-0.3-beta15/debian/rules
@@ -0,0 +1,103 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -g
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+config.status: configure
+	dh_testdir
+
+	-test -r /usr/share/misc/config.sub && \
+	cp -f /usr/share/misc/config.sub config.sub
+	-test -r /usr/share/misc/config.guess && \
+	cp -f /usr/share/misc/config.guess config.guess
+
+	./configure --host=$(DEB_HOST_GNU_TYPE) \
+                    --build=$(DEB_BUILD_GNU_TYPE) \
+                    --prefix=/usr \
+                    --mandir=\$${prefix}/share/man \
+                    --infodir=\$${prefix}/share/info \
+                    --with-db-path=/etc/hddtemp.db
+
+build: build-stamp
+build-stamp: config.status
+	dh_testdir
+	$(MAKE)
+	touch build-stamp
+
+clean: debian-clean
+	dh_clean
+
+debian-clean:
+	dh_testdir
+	dh_testroot
+	-$(MAKE) distclean
+	rm -f po/*.gmo
+	-rm -f *-stamp
+	-rm -f config.sub config.guess
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# Add here commands to install the package into debian/hddtemp.
+	$(MAKE) install DESTDIR=$(CURDIR)/debian/hddtemp
+
+	install -p -o root -g root -m 644 $(CURDIR)/debian/hddtemp.db \
+	                                  $(CURDIR)/debian/hddtemp/etc/hddtemp.db
+
+	cp -a $(CURDIR)/contribs $(CURDIR)/debian/hddtemp/usr/share/doc/hddtemp
+	rm -f $(CURDIR)/debian/hddtemp/usr/share/doc/hddtemp/Makefile*
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir 
+	dh_testroot 
+	dh_installdebconf 
+	dh_installdocs 
+	dh_installexamples 
+	dh_installmenu 
+	dh_installlogcheck
+#	dh_installlogrotate 
+#	dh_installemacsen 
+#	dh_installpam 
+#	dh_installmime 
+	dh_installinit
+	dh_installcron 
+	dh_installman 
+	dh_installinfo 
+	dh_installchangelogs ChangeLog
+	dh_link 
+	dh_strip 
+	dh_compress 
+	dh_fixperms 
+#	dh_makeshlibs 
+	dh_installdeb 
+#	dh_perl 
+	dh_shlibdeps 
+	dh_gencontrol 
+	dh_md5sums 
+	dh_builddeb 
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
+
--- hddtemp-0.3-beta15.orig/debian/postinst
+++ hddtemp-0.3-beta15/debian/postinst
@@ -0,0 +1,139 @@
+#!/bin/sh
+# postinst script for hddtemp
+set -e
+
+conffile="/etc/default/hddtemp"
+
+update_config_file()
+{
+	db_field=$1
+	config_field=$2
+  
+	RET=false
+  	db_get $db_field
+	if [ -n "$RET" ] ; then
+		if grep -q "^$config_field" $conffile ; then 
+			# keep any admin changes, while replacing the variable content
+			sed "s/^[ ]*$config_field=\".*\"/$config_field=\"$RET\"/" < $conffile > $conffile.new && 
+	   		mv $conffile.new $conffile
+  		else
+	    		echo "$config_field=\"$RET\"" >> $conffile
+		fi
+	fi
+}
+
+# Source debconf library -- we have a Depends line
+# to make sure it is there...
+. /usr/share/debconf/confmodule
+db_version 2.0
+
+case "$1" in
+    configure)
+	if [ -f $conffile ] ; then
+          sed -e "s/^[ ]*DAEMON/RUN_DAEMON/g" $conffile > $conffile.new
+	  mv $conffile.new $conffile
+	  if ! grep -q SYSLOG $conffile ; then
+	    cat << EOF >> $conffile
+
+# Logging period (in seconds) for the temperatures.
+SYSLOG="0"
+EOF
+	  fi
+	  if ! grep -q OPTIONS $conffile ; then
+	    cat << EOF >> $conffile
+
+# Other options to pass to hddtemp
+OPTIONS=""
+EOF
+	  fi
+	  if ! grep -q DISKS_NOPROBE $conffile ; then
+	    cat << EOF >> $conffile
+
+# List of devices you want to use with hddtemp, but that would not be
+# probed for a working sensor.
+DISKS_NOPROBE=""
+EOF
+	  fi
+	else
+          cat << EOF > $conffile
+# Defaults for hddtemp initscript (/etc/init.d/hddtemp)
+# This is a POSIX shell fragment
+
+# Master system-wide hddtemp switch. The initscript will not run if it is not
+# set to true. STOP THE SERVICE BEFORE DISABLING IT!
+
+# [automatically edited by postinst, do not change line format or set it to
+# anything but false or true ]
+RUN_DAEMON="true"
+
+# List of devices you want to use with hddtemp. If none specified,
+# hddtemp will probe standard devices.
+#DISKS="/dev/hda"
+
+# List of devices you want to use with hddtemp, but that would not be
+# probed for a working sensor.
+DISKS_NOPROBE=""
+
+# IP address of the interface on which you want hddtemp to be bound
+# on. If none specified, goes to 127.0.0.1. Use 0.0.0.0 to bind hddtemp
+# on all interfaces.
+INTERFACE="127.0.0.1"
+
+# Port number on which you want hddtemp to listen on. If none specified,
+# the port 7634 is used.
+PORT="7634"
+
+# Database file to use. If none specified, /etc/hddtemp.db is used.
+#DATABASE="/etc/hddtemp.db"
+
+# Separator to use between fields. The default separator is '|'.
+#SEPARATOR="|"
+
+# Logging period (in seconds) for the temperatures.
+SYSLOG="0"
+
+# Other options to pass to hddtemp
+OPTIONS=""
+EOF
+	fi
+    
+	update_config_file hddtemp/daemon RUN_DAEMON
+	update_config_file hddtemp/syslog SYSLOG
+	update_config_file hddtemp/interface INTERFACE
+	update_config_file hddtemp/port PORT
+
+ 	if ! dpkg-statoverride --list /usr/sbin/hddtemp 1>/dev/null 2>&1; then
+	# check if we are installing suid or not
+		RET=false
+		db_get hddtemp/SUID_bit
+		if [ "$RET" = "true" ]; then
+			chmod 4755 /usr/sbin/hddtemp
+			ln -sf /usr/sbin/hddtemp /usr/bin/hddtemp
+			ln -sf ../man8/hddtemp.8.gz /usr/share/man/man1/hddtemp.1.gz
+    		else
+			chmod 0755 /usr/sbin/hddtemp
+			rm -f /usr/bin/hddtemp
+			rm -f /usr/share/man/man8/hddtemp.1.gz 
+    		fi
+	fi
+
+	db_stop
+
+	rm -f /etc/logcheck/ignore.d.workstation/hddtemp
+    ;;
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- hddtemp-0.3-beta15.orig/debian/po/fr.po
+++ hddtemp-0.3-beta15/debian/po/fr.po
@@ -0,0 +1,158 @@
+# Michel Grentzinger <mic.grentz@online.fr>, 2003
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp1\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2006-05-16 20:44+0200\n"
+"Last-Translator: Jean-Luc Coulon (f5ibh) <jean-luc.coulon@«anadoo.fr>\n"
+"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Voulez-vous installer /usr/sbin/hddtemp « setuid root » ?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Vous avez le choix d'installer hddtemp avec le bit SUID positionné."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Si vous choisissez cette option, les utilisateurs non privilégiés de votre "
+"système pourront exécuter le programme. Cependant, dans ce cas, il peut "
+"potentiellement être utilisé lors d'une attaque de sécurité sur votre "
+"ordinateur. Dans le doute, il est suggéré de de ne pas activer cette option. "
+"Si vous changez d'avis ultérieurement, vous pourrez exécuter la commande : "
+"« dpkg-reconfigure hddtemp »."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr "Intervalle de journalisation des températures :"
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"Hddtemp peut enregistrer périodiquement la température du ou des disques "
+"durs via les fonctions de journalisation du système."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Veuillez choisir l'intervalle en secondes entre deux mesures. Indiquez 0 "
+"pour désactiver cette fonctionnalité."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Voulez-vous lancer automatiquement le démon hddtemp au démarrage ?"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"Hddtemp peut être lancé en tant que démon, à l'écoute sur le port 7634. Ce "
+"démon est utilisé par certains logiciels tel que gkrellm pour obtenir la "
+"température des disques durs."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Ce démon peut être lancé automatiquement au démarrage de l'ordinateur. Dans "
+"le doute, il est suggéré de ne pas activer cette option. Si vous changez "
+"d'avis ultérieurement, vous pourrez exécuter la commande : « dpkg-"
+"reconfigure hddtemp »."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr "Interface où hddtemp sera à l'écoute :"
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"Hddtemp peut écouter les connexions entrantes sur une interface spécifique "
+"ou sur toutes les interfaces."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Pour écouter sur une interface spécifique, indiquez l'adresse IP de cette "
+"interface (127.0.0.1, qui est la valeur par défaut, correspond à l'interface "
+"lo). Pour écouter sur toutes les interfaces, saisissez simplement 0.0.0.0."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr "Port sur lequel hddtemp sera à l'écoute :"
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Par défaut, hddtemp attend les connexions entrantes sur le port 7634. "
+"Cependant, si ce port ne vous convient pas, vous pouvez en choisir un autre."
+
+#, fuzzy
+#~ msgid "At which interval do you want to log the temperatures?"
+#~ msgstr "Fréquence de journalisation des températures :"
--- hddtemp-0.3-beta15.orig/debian/po/da.po
+++ hddtemp-0.3-beta15/debian/po/da.po
@@ -0,0 +1,167 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+#
+# Claus Hindsgaul <claus_h@image.dk>, 2004, 2005.
+# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2006-05-19 15:29+0200\n"
+"Last-Translator: Claus Hindsgaul <claus.hindsgaul@gmail.com>\n"
+"Language-Team: Danish <dansk@klid.dk>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Vil du have at /usr/sbin/hddtemp skal installeres SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Du har mulighed for at installere hddtemp med SUID-bitten sat."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Hvis du gør hddtemp SUID, vil upriviligerede brugere af dit system kunne "
+"køre den. Dette kan dog potentielt medføre at hddtemp kan blive brugt under "
+"et sikkerhedsangreb på din computer. Hvis du er i tvivl, foreslås det at du "
+"installerer den uden SUID. Hvis du ændrer mening, kan du køre 'dpkg-"
+"reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr "Tidsrum mellem to tjek:"
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"hddtemp kan logge harddiskenes temperatur med jævne mellemrum via SYSLOG-"
+"grænsefladen."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Angiv en værdi i sekunder, der angiver intervallet mellem to tjek. Du kan "
+"deaktivere tjekkene ved blot at skriv 0."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Vil du starte hddtemp-dæmonen under opstarten?"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"hddtemp kan køres som en dæmon, der lytter på port 7634 efter indkommende "
+"forbindelser. Den bruges af bestemte programmer såsom gkrellm til at hente "
+"harddiskenes temperaturer."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Du har mulighed for at få startet hddtemp-dæmonen automatisk under opstart "
+"af computeren. Hvis du er i tvivl, foreslås det at du ikke starter den "
+"automatisk under opstarten. Hvis du ændrer mening, kan du køre: 'dpkg-"
+"reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr "Netkort, der skal lyttes på:"
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"hddtemp kan lytte efter indkommende forbindelser på et bestemt netkort eller "
+"på alle netkort."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"For at lytte til et bestemt netkort, skal du angive IP-adressen på dette "
+"(standardværdien 127.0.0.1 svarer til det virtuelle lo-netkort). For at "
+"lytte på alle netkort, skal du blot skrive 0.0.0.0."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr "Port, der skal lyttes på:"
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Som udgangspunkt vil hddtemp lytte efter indkommende forbindelser på port "
+"7634. Hvis du ikke finder denne port passende, kan du vælge en anden."
+
+#, fuzzy
+#~ msgid "At which interval do you want to log the temperatures?"
+#~ msgstr "Hvor ofte ønsker du at logge temperaturerne?"
+
+#~ msgid "On which interface do you want hddtemp to listen on?"
+#~ msgstr "Hvilket netkort vil du have hddtemp til at lytte på?"
+
+#~ msgid "On which port do you want hddtemp to listen on?"
+#~ msgstr "Hvilken port vil du have hddtemp til at lytte på?"
+
--- hddtemp-0.3-beta15.orig/debian/po/templates.pot
+++ hddtemp-0.3-beta15/debian/po/templates.pot
@@ -0,0 +1,124 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
--- hddtemp-0.3-beta15.orig/debian/po/POTFILES.in
+++ hddtemp-0.3-beta15/debian/po/POTFILES.in
@@ -0,0 +1 @@
+[type: gettext/rfc822deb] templates
--- hddtemp-0.3-beta15.orig/debian/po/sv.po
+++ hddtemp-0.3-beta15/debian/po/sv.po
@@ -0,0 +1,243 @@
+# Swedish translation of hddtemp.
+# Copyright (C) 2006 Free Software Foundation, Inc.
+# This file is distributed under the same license as the hddtemp package.
+# Daniel Nylander <po@danielnylander.se>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp 0.3-beta14-4\n"
+"Report-Msgid-Bugs-To: hddtemp@guzu.net\n"
+"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+"PO-Revision-Date: 2006-11-15 14:47+0100\n"
+"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
+"Language-Team: Swedish <sv@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Poedit-Language: swe\n"
+"X-Poedit-Country: swe\n"
+
+#: ../src/hddtemp.c:156
+#, c-format
+msgid ""
+"\n"
+"================= hddtemp %s ==================\n"
+"Model: %s\n"
+"\n"
+msgstr ""
+"\n"
+"================= hddtemp %s ==================\n"
+"Modell: %s\n"
+"\n"
+
+#: ../src/hddtemp.c:189
+#, c-format
+msgid ""
+"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
+"WARNING: This doesn't mean it hasn't got one.\n"
+"WARNING: If you are sure it has one, please contact me (hddtemp@guzu.net).\n"
+"WARNING: See --help, --debug and --drivebase options.\n"
+msgstr ""
+"VARNING: Disken %s verkar inte ha en temperatursensor.\n"
+"VARNING: Detta behöver inte betyda att den inte har en.\n"
+"VARNING: Om du är säker att den har en, kontakta (hddtemp@guzu.net).\n"
+"VARNING: Se flaggorna --help, --debug och --drivebase.\n"
+
+#: ../src/hddtemp.c:197
+#, c-format
+msgid "%s: %s:  no sensor\n"
+msgstr "%s: %s:  ingen sensor\n"
+
+#: ../src/hddtemp.c:204
+#, c-format
+msgid ""
+"WARNING: Drive %s doesn't appear in the database of supported drives\n"
+"WARNING: But using a common value, it reports something.\n"
+"WARNING: Note that the temperature shown could be wrong.\n"
+"WARNING: See --help, --debug and --drivebase options.\n"
+"WARNING: And don't forget you can add your drive to hddtemp.db\n"
+msgstr ""
+"VARNING: Disken %s verkar inte finnas i databasen över diskar som stöds\n"
+"VARNING: Men använder man ett vanligt värde rapporterar den något.\n"
+"VARNING: Observera att temperaturen som visas kan vara felaktig.\n"
+"VARNING: Se flaggorna --help, --debug och --drivebase.\n"
+"VARNING: Och glöm inte att du kan lägga till din disk till hddtemp.db\n"
+
+#: ../src/hddtemp.c:211
+#, c-format
+msgid "%s: %s:  %d%sC or %sF\n"
+msgstr "%s: %s:  %d%sC eller %sF\n"
+
+#: ../src/hddtemp.c:235
+#, c-format
+msgid "%s: %s: drive is sleeping\n"
+msgstr "%s: %s: hårddisken sover\n"
+
+#: ../src/hddtemp.c:242
+#, c-format
+msgid "%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"
+msgstr "%s: %s:  disken stöds, men har ingen temperatursensor.\n"
+
+#: ../src/hddtemp.c:246
+#, c-format
+msgid "ERROR: %s: %s: unknown returned status\n"
+msgstr "FEL: %s: %s: okänd svarsstatus\n"
+
+#: ../src/hddtemp.c:261
+#, c-format
+msgid ""
+"\n"
+"If one of the field value seems to match the temperature, be sure to read\n"
+"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
+msgstr ""
+"\n"
+"Om ett av fältvärdena verkar matcha temperaturen, se till att läsa\n"
+"manualsidan för hddtemp innan du skickar en rapport (sektionen\n"
+"REPORT). Tack.\n"
+
+#: ../src/hddtemp.c:337
+#, c-format
+msgid "ERROR: invalid separator.\n"
+msgstr "FEL: ogiltig avgränsare.\n"
+
+#: ../src/hddtemp.c:348
+#, c-format
+msgid "ERROR: invalid port number.\n"
+msgstr "FEL: ogiltigt portnummer.\n"
+
+#: ../src/hddtemp.c:370
+#, c-format
+msgid ""
+" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
+"\n"
+"   hddtemp displays the temperature of drives supplied in argument.\n"
+"   Drives must support S.M.A.R.T.\n"
+"\n"
+"  TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
+"\n"
+"  -b   --drivebase   :  display database file content that allow hddtemp to\n"
+"                        recognize supported drives.\n"
+"  -D   --debug       :  display various S.M.A.R.T. fields and their values.\n"
+"                        Useful to find a value that seems to match the\n"
+"                        temperature and/or to send me a report.\n"
+"                        (done for every drive supplied).\n"
+"  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by default.)\n"
+"  -f   --file=FILE   :  specify database file to use.\n"
+"  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon mode).\n"
+"  -n   --numeric     :  print only the temperature.\n"
+"  -p   --port=#      :  port to listen to (in TCP/IP daemon mode).\n"
+"  -s   --separator=C :  separator to use between fields (in TCP/IP daemon mode).\n"
+"  -S   --syslog=s    :  log temperature to syslog every s seconds.\n"
+"  -u   --unit=[C|F]  :  force output temperature either in Celius or Fahrenheit.\n"
+"  -q   --quiet       :  do not check if the drive is supported.\n"
+"  -v   --version     :  display hddtemp version number.\n"
+"  -w   --wake-up     :  wake-up the drive if need.\n"
+"  -4                 :  listen on IPv4 sockets only.\n"
+"  -6                 :  listen on IPv6 sockets only.\n"
+"\n"
+"Report bugs or new drives to <hddtemp@guzu.net>.\n"
+msgstr ""
+" Användning: hddtemp [FLAGGOR] [TYP:]DISK1 [[TYP:]DISK2]...\n"
+"\n"
+"   hddtemp visar temperaturen för de hårddiskar som angivits i argumentet.\n"
+"   Hårddiskarna måste ha stöd för S.M.A.R.T.\n"
+"\n"
+"  TYP kan vara SATA, PATA eller SCSI. Hddtemp försöker gissa om den inte angivs.\n"
+"\n"
+"  -b   --drivebase   :  visa innehållet i databasfilen som gör att hddtemp\n"
+"                        kan känna igen diskar som stöds.\n"
+"  -D   --debug       :  visa olika S.M.A.R.T-fält och dess värden.\n"
+"                        Användbar för att hitta värdet som stämmer in på\n"
+"                        temperaturen och/eller för att skicka mig en rapport.\n"
+"                        (görs för varje disk som skickas med).\n"
+"  -d   --daemon      :  kör hddtemp i TCP/IP-demonläge (port %d som standard.)\n"
+"  -f   --file=FIL    :  ange databasfil att använda.\n"
+"  -l   --listen=adr  :  lyssna på ett specifikt gränssnitt (i TCP/IP-demonläge).\n"
+"  -n   --numeric     :  skriv bara ut temperaturen.\n"
+"  -p   --port=#      :  port att lyssna på (i TCP/IP-demonläge).\n"
+"  -s   --separator=C :  separatör att använda mellan fält (i TCP/IP-demonläge).\n"
+"  -S   --syslog=s    :  logga temperaturen till syslog var s sekund.\n"
+"  -u   --unit=[C|F]  :  tvinga rapporterad temperatur i antingen Celius eller Fahrenheit.\n"
+"  -q   --quiet       :  kontrollera inte om det finns stöd för disken.\n"
+"  -v   --version     :  visa hddtemp versionsnummer.\n"
+"  -w   --wake-up     :  väck upp disken om det behövs.\n"
+"  -4                 :  lyssna endast på IPv4 socket.\n"
+"  -6                 :  lyssna endast på IPv6 socket.\n"
+"\n"
+"Rapportera fel eller nya hårddiskar till <hddtemp@guzu.net>\n"
+"Skicka synpunkter på översättningen till <tp-sv@listor.tp-sv.se>\n"
+
+#: ../src/hddtemp.c:400
+#, c-format
+msgid "hddtemp version %s\n"
+msgstr "hddtemp version %s\n"
+
+#: ../src/hddtemp.c:416
+#, c-format
+msgid "ERROR: invalid interval.\n"
+msgstr "FEL: ogiltigt intervall.\n"
+
+#: ../src/hddtemp.c:433
+#, c-format
+msgid "Too few arguments: you must specify one drive, at least.\n"
+msgstr "För få argument: du måste ange åtminstone en disk.\n"
+
+#: ../src/hddtemp.c:443
+#, c-format
+msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
+msgstr "FEL: kan inte använda flaggorna --debug och --daemon eller --syslog samtidigt.\n"
+
+#: ../src/hddtemp.c:500
+#, c-format
+msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
+msgstr "FEL: %s: kan inte fastställa busstyp (eller så är busstypen okänd)\n"
+
+#: ../src/ata.c:66
+#: ../src/scsi.c:64
+msgid "unknown"
+msgstr "okänd"
+
+#: ../src/ata.c:85
+#: ../src/ata.c:104
+#: ../src/scsi.c:91
+#, c-format
+msgid "S.M.A.R.T. not available"
+msgstr "S.M.A.R.T. är inte tillgängligt"
+
+#: ../src/db.c:115
+#, c-format
+msgid ""
+"\n"
+"Regexp%s| Value | Description\n"
+"------%s---------------------\n"
+msgstr ""
+"\n"
+"Regexp%s| Värde | Beskrivning\n"
+"------%s---------------------\n"
+
+#: ../src/db.c:121
+#, c-format
+msgid "%s%s| %5d | %s\n"
+msgstr "%s%s| %5d | %s\n"
+
+#: ../src/db.c:236
+#, c-format
+msgid "hddtemp: can't open %1$s: %2$s\n"
+msgstr "hddtemp: kan inte öppna %1$s: %2$s\n"
+
+#: ../src/db.c:250
+#, c-format
+msgid "ERROR: syntax error at line %1$d in %2$s\n"
+msgstr "FEL: syntaxfel på rad %1$d i %2$s\n"
+
+#: ../src/db.c:257
+#, c-format
+msgid "  ERROR: line exceed %1$d characters in %2$s.\n"
+msgstr " FEL: raden överstiger %1$d tecken i %2$s.\n"
+
+#: ../src/scsi.c:111
+#: ../src/scsi.c:129
+#, c-format
+msgid "log sense failed : %s"
+msgstr "igenkänning av logg misslyckades : %s"
+
--- hddtemp-0.3-beta15.orig/debian/po/es.po
+++ hddtemp-0.3-beta15/debian/po/es.po
@@ -0,0 +1,158 @@
+# hddtemp debconf translation to spanish
+# Copyright (C) 2003, 2006 Software in the Public Interest
+# This file is distributed under the same license as the hddtemp package.
+#
+# Changes:
+# - Initial translation
+#        Carlos Valdivia Yagüe <valyag@dat.etsit.upm.es>, 2003, 2006
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp 0.3-beta15-23\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-08-13 05:01-0600\n"
+"PO-Revision-Date: 2006-08-16 22:30+0200\n"
+"Last-Translator: Carlos Valdivia Yagüe <valyag@dat.etsit.upm.es>\n"
+"Language-Team: Debian L10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "¿Quiere instalar /usr/sbin/hddtemp SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Puede instalar hddtemp con el bit SUID activado."
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Si hace hddtemp SUID, los usuarios sin privilegios del sistema podrán "
+"usarlo. Sin embargo, esto podría ser utilizado en un ataque al sistema. "
+"Si duda, le sugiero que no lo instale SUID. Si posteriormente cambia "
+"de opinión, puede ejecutar: «dpkg-reconfigure hddtemp»."
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid "Interval between two checks:"
+msgstr "Período entre dos comprobaciones:"
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"hddtemp puede registrar periódicamente la temperatura de el disco o discos "
+"duros mediante la interfaz de syslog."
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Introduzca un valor en segundos para el período entre dos comprobaciones "
+"sucesivas. Para desactivar esta característica, simplemente escriba 0."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "¿Desea ejecutar el demonio de hddtemp al arrancar?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"hddtemp puede ejecutarse en modo demonio, escuchando conexiones entrantes en "
+"el puerto 7634. Algunos programas, como gkrellm, lo utilizan para obtener la "
+"temperatura de los discos duros."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Tiene la posibilidad de ejecutar el demonio de hddtemp automáticamente cada "
+"vez que arranque el sistema. Si duda, le sugiero que no lo arranque "
+"automáticamente al arrancar. Si posteriormente cambia de opinión, puede "
+"ejecutar: «dpkg-reconfigure hddtemp»."
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid "Interface to listen on:"
+msgstr "Interfaz en la que escuchar:"
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr "hddtemp puede escuchar en una interfaz concreta o bien en todas."
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Para que escuche en una interfaz determinada, introduzca la dirección IP de "
+"la interfaz (el valor predeterminado, 127.0.0.1, corresponde a la interfaz "
+"lo). Para escuchar en todas las interfaces, simplemente introduzca 0.0.0.0."
+
+#. Type: string
+#. Description
+#: ../templates:5001
+msgid "Port to listen on:"
+msgstr "Puerto en el que escuchar:"
+
+#. Type: string
+#. Description
+#: ../templates:5001
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Por defecto, hddtemp escucha en el puerto 7634. Sin embargo, si no le parece "
+"apropiado, puede cambiarlo por otro."
--- hddtemp-0.3-beta15.orig/debian/po/vi.po
+++ hddtemp-0.3-beta15/debian/po/vi.po
@@ -0,0 +1,164 @@
+# Vietnamese Translation for hddtemp.
+# Copyright Â© 2005 Free Software Foundation, Inc.
+# Clytie Siddall <clytie@riverland.net.au>, 2005.
+# 
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp 0.3-beta13-14\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2005-06-04 13:23+0930\n"
+"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
+"Language-Team: Vietnamese <gnomevi-list@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr ""
+"Báº¡n cÃ³ muá»‘n cÃ i Ä‘áº·t /usr/sbin/hddtemp vá»›i tÆ° cÃ¡ch ngÆ°á»�i chá»§ (SUID root) "
+"khÃ´ng?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "TÃ¹y chá»�n báº¡n cÃ³ thá»ƒ cÃ i Ä‘áº·t trÃ¬nh hddtemp vá»›i bit SUID Ä‘Æ°á»£c láº­p."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+#, fuzzy
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Náº¿u báº¡n láº­p trÃ¬nh hddtemp lÃ  SUID thÃ¬ ngÆ°á»�i dÃ¹ng khÃ´ng cÃ³ quyá»�n Ä‘áº·c biá»‡t "
+"trong há»‡ thá»‘ng báº¡n thÃ¬ sáº½ cÃ³ thá»ƒ cháº¡y trÃ¬nh áº¥y. Tuy nhiÃªn, thiáº¿t láº­p nÃ y cÃ³ "
+"thá»ƒ cho phÃ©p ngÆ°á»�i láº¡ táº¥n cÃ´ng sá»± báº£o máº­t cá»§a mÃ¡y tÃ­nh báº¡n. Náº¿u báº¡n chÆ°a "
+"cháº¯c, Ä‘á»‡ nghá»‹ báº¡n cÃ i Ä‘áº·t trÃ¬nh áº¥y khÃ´ng cÃ³ quyá»�n SUID. Náº¿u báº¡n thay Ä‘á»•i Ã½ "
+"kiáº¿n nÃ y láº§n sau, vÃ o lÃºc áº¥y báº¡n cÃ³ thá»ƒ cháº¡y lá»‡nh nÃ y:dpkg-reconfigure "
+"hddtemp\n"
+"(dpkg cáº¥u hÃ¬nh láº¡i hddtemp)"
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"TrÃ¬nh hddtemp cÃ³ thá»ƒ ghi lÆ°u theo Ä‘á»‹nh ká»· nhiá»‡t Ä‘á»™ cá»§a nhá»¯ng Ä‘Ä©a cá»©ng vÃ  cá»§a "
+"giao diá»‡n SYSLOG."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"HÃ£y nháº­p má»™t giÃ¡ trá»‹ theo giÃ¢y, tÆ°Æ¡ng á»©ng vá»›i khoáº£ng thá»�i gian giá»¯a hai láº§n "
+"kiá»ƒm tra. Ä�á»ƒ táº¯t tÃ­nh nÄƒng nÃ y,chá»‰ Ä‘Æ¡n giáº£n hÃ£y nháº­p sá»‘ 0."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Báº¡n cÃ³ muá»‘n khá»Ÿi cháº¡y trÃ¬nh ná»�n hddtemp khi khá»Ÿi Ä‘á»™ng há»‡ thá»‘ng khÃ´ng?"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"TrÃ¬nh hddtemp cÃ³ thá»ƒ cháº¡y Ä‘áº±ng sau (lÃ  Â«dÃ¦monÂ»), láº¯ng nghe trÃªn cá»•ng 7634 "
+"cho sá»± káº¿t ná»‘i má»›i Ä‘áº¿n."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+#, fuzzy
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"TÃ¹y chá»�n báº¡n cÃ³ thá»ƒ tá»± Ä‘á»™ng khá»Ÿi cháº¡y trÃ¬nh ná»�n hddtemp khi khá»Ÿi Ä‘á»™ng mÃ¡y "
+"nÃ y. Náº¿u báº¡n chÆ°a cháº¯c thÃ¬ Ä‘á»‡ nghá»‹ báº¡n khÃ´ng tá»± Ä‘á»™ng khá»Ÿi cháº¡y nÃ³ khi khá»Ÿi "
+"Ä‘á»™ng mÃ¡y. Náº¿u báº¡n thay Ä‘á»•i Ã½ kiáº¿n láº§n sau, vÃ o lÃºc áº¥y báº¡n cÃ³ thá»ƒ cháº¡y lá»‡nh "
+"nÃ y:\n"
+"dpkg-reconfigure hddtemp\n"
+"(dpkg cáº¥u hÃ¬nh láº¡i hddtemp)."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"TrÃ¬nh hddtemp cÃ³ thá»ƒ láº¯ng nghe sá»± káº¿t ná»‘i má»›i Ä‘áº¿n trÃªn má»™t giao diá»‡n dá»©t "
+"khoÃ¡t, hoáº·c trÃªn má»�i giao diá»‡n."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Ä�á»ƒ láº¯ng nghe trÃªn má»™t giao diá»‡n dá»©t khoÃ¡t, hÃ£y nháº­p Ä‘á»‹a chá»‰ IP cá»§a giao diá»‡n "
+"áº¥y (giÃ¡ trá»‹ máº·c Ä‘á»‹nh lÃ  Â«127.0.0.0Â», mÃ  tÆ°Æ¡ng á»©ng vá»›i giao diá»‡n lo). Ä�á»ƒ láº¯ng "
+"nghe trÃªn má»�i giao diá»‡n thÃ¬ chá»‰ Ä‘Æ¡n giáº£n hÃ£y nháº­p Â«0.0.0.0Â»."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Máº·c Ä‘á»‹nh lÃ  trÃ¬nh hddtemp láº¯ng nghe sá»± káº¿t ná»‘i má»›i Ä‘áº¿n trÃªn cá»•ng 7634. Tuy "
+"nhiÃªn, náº¿u báº¡n khÃ´ng tháº¥y cá»•ng nÃ y lÃ  thÃ­ch há»£p, thÃ¬ báº¡n cÃ³ thá»ƒ nháº­p má»™t "
+"cá»•ng khÃ¡c."
+
+#, fuzzy
+#~ msgid "At which interval do you want to log the temperatures?"
+#~ msgstr "Báº¡n muá»‘n ghi lÆ°u nhiá»‡t Ä‘á»™ thÆ°á»�ng xuyÃªn cá»¡ nÃ o?"
+
+#~ msgid "On which interface do you want hddtemp to listen on?"
+#~ msgstr "Báº¡n cÃ³ muá»‘n trÃ¬nh hddtemp láº¯ng nghe trÃªn giao diá»‡n nÃ o?"
+
+#~ msgid "On which port do you want hddtemp to listen on?"
+#~ msgstr "Báº¡n cÃ³ muá»‘n trÃ¬nh hddtemp láº¯ng nghe trÃªn cá»•ng nÃ o?"
--- hddtemp-0.3-beta15.orig/debian/po/de.po
+++ hddtemp-0.3-beta15/debian/po/de.po
@@ -0,0 +1,157 @@
+# translation of hddtemp_0.3-beta15-30_de.po to German
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+#
+# Erik Schanze <eriks@debian.org>, 2004-2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp_0.3-beta15-30_de\n"
+"Report-Msgid-Bugs-To: hddtemp@packages.debian.org\n"
+"POT-Creation-Date: 2006-10-20 13:44+0200\n"
+"PO-Revision-Date: 2006-11-05 20:46+0100\n"
+"Last-Translator: Erik Schanze <eriks@debian.org>\n"
+"Language-Team: German <debian-l10n-german@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms:  nplurals=2; plural=(n != 1);\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Soll /usr/sbin/hddtemp mit Root-Rechten arbeiten?"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Sie haben die MÃ¶glichkeit bei Hddtemp das SUID-Bit fÃ¼r Root zu setzen."
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Wenn Sie Hddtemp mit Root-Rechten ausstatten, dann kÃ¶nnen normale "
+"Benutzer das Programm ausfÃ¼hren. Dadurch kÃ¶nnte Hddtemp aber auch "
+"fÃ¼r einen Angriff auf die Sicherheit Ihres Rechners eingesetzt "
+"werden. Sollten Sie sich unsicher sein, installieren Sie es bitte "
+"ohne SUID. SpÃ¤ter kÃ¶nnen Sie die Einstellung mit dem Befehl: "
+"'dpkg-reconfigure hddtemp' immer noch Ã¤ndern."
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid "Interval between two checks:"
+msgstr "Zeitraum zwischen zwei ÃœberprÃ¼fungen:"
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"Hddtemp kann die Temperatur der Festplatte(n) Ã¼ber die "
+"Syslog-Schnittstelle regelmÃ¤ÃŸig protokollieren."
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Bitte geben Sie die Zeitspanne zwischen zwei ÃœberprÃ¼fungen in "
+"Sekunden ein. Um diese Funktion abzuschalten, geben Sie 0 ein."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Den Hddtemp-Dienst beim Hochfahren des Systems starten?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"Hddtemp kann als Dienst betrieben werden und lauscht am Port 7634 auf "
+"ankommende Verbindungen. Das wird von einigen Programmen wie Gkrellm "
+"genutzt, um die Temperatur der Festplatten abzufragen."
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Sie haben die MÃ¶glichkeit, den Dienst Hddtemp beim Hochfahren des Systems "
+"automatisch zu starten. Sollten Sie sich unsicher sein, starten Sie den "
+"Dienst nicht automatisch. SpÃ¤ter kÃ¶nnen Sie die Einstellung mit dem Befehl: "
+"'dpkg-reconfigure hddtemp' immer noch Ã¤ndern."
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid "Interface to listen on:"
+msgstr "Schnittstelle, an der gelauscht wird:"
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"Hddtemp kann an einer speziellen Schnittstelle oder an allen auf ankommende "
+"Verbindungen warten."
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Um an einer einzelnen Schnittstelle zu lauschen, geben Sie deren IP-Adresse "
+"ein (Standardwert ist 127.0.0.1 fÃ¼r die Schnittstelle lo). Um an allen Schnittstellen zu lauschen, verwenden Sie einfach 0.0.0.0."
+
+#. Type: string
+#. Description
+#: ../templates:5001
+msgid "Port to listen on:"
+msgstr "Port, an dem gelauscht wird:"
+
+#. Type: string
+#. Description
+#: ../templates:5001
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Normalerweise wartet Hddtemp am Port 7634 auf ankommende Verbindungen. Wenn "
+"Sie einen anderen Port wÃ¼nschen, geben Sie ihn ein."
+
--- hddtemp-0.3-beta15.orig/debian/po/cs.po
+++ hddtemp-0.3-beta15/debian/po/cs.po
@@ -0,0 +1,164 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2005-04-14 21:07+0200\n"
+"Last-Translator: Miroslav Jezbera <jezberam@phoenix.inf.upol.cz>\n"
+"Language-Team: Czech <debian-l10n-czech@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Chcete aby /usr/sbin/hddtemp byl nainstalován jako SUID root?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Máte mo¾nost instalovat hddtemp s nastaveným SUID bitem."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+#, fuzzy
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Pokud nastavíte hddtemp SUID bit, neprivilegovaní u¾ivatelé va¹eho systému "
+"ho budou moci spou¹tìt. Takto nastavený, mù¾e být hddtemp také vyu¾it ke "
+"kompromitování va¹eho poèítaèe. Pokud si nejste jisti, pak doporuèuji "
+"instalovat ho bez SUID bitu. Rozmyslíte-li si to pozdìji, mù¾ete spustit: "
+"'dpkg-reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"hddtemp mù¾e pravidelnì zaznamenávat teplotu pevného disku (pevných diskù) "
+"pøes rozhraní SYSLOGu."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Zadejte poèet sekund odpovídající dobì mezi dvìmi mìøeními. Pro zakázání "
+"této vlastnosti jednodu¹e zadejte 0."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Chcete spou¹tìt démona hddtemp pøi startu?"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"hddtemp mù¾e bì¾et jako démon a èekat na portu 7634 pøíchozí spojení. Takto "
+"mù¾e být vyu¾íván programy jako gkrellm pro zji¹tìní teploty pevných diskù."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+#, fuzzy
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Máte mo¾nost spou¹tìt démona hddtemp automaticky pøi startu poèítaèe. Pokud "
+"si nejste jisti, pak doporuèuji spou¹tìt ho pøi startu. Rozmyslíte-li si to "
+"pozdìji, mù¾ete spustit: 'dpkg-reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"hddtemp mù¾e oèekávat pøíchozí spojení na konkrétním rozhraní nebo na v¹ech "
+"rozhraních."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Aby poslouchal na konkrétním rozhraní, vlo¾te IP adresu tohoto rozhraní "
+"(127.0.0.1 je výchozí hodnota, která odpovídá lo rozhraní). Pokud chcete, "
+"aby poslouchal na v¹ech rozhraních, jednodu¹e vlo¾te 0.0.0.0."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Vìt¹inou hddtemp oèekává pøíchozí spojení na portu 7634. Pokud se vám "
+"výchozí hodnota nezdá vhodná, mù¾ete vlo¾it jinou."
+
+#, fuzzy
+#~ msgid "At which interval do you want to log the temperatures?"
+#~ msgstr "Jak èasto chcete zaznamenávat teplotu?"
+
+#~ msgid "On which interface do you want hddtemp to listen on?"
+#~ msgstr "Na kterém rozhraní chcete aby hddtemp poslouchal?"
+
+#~ msgid "On which port do you want hddtemp to listen on?"
+#~ msgstr "Na kterém portu chcete aby hddtemp poslouchal?"
--- hddtemp-0.3-beta15.orig/debian/po/nl.po
+++ hddtemp-0.3-beta15/debian/po/nl.po
@@ -0,0 +1,161 @@
+# translation of hddtemp_0.3-beta15-10_templates.po to Dutch
+#
+# This file is distributed under the same license as the hddtemp package.
+# Please see debian/copyright.
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+#
+#This is an unofficial translation
+# Kurt De Bree <kdebree(AT)telenet(DOT)be>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp_0.3-beta15-10_templates\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2006-05-19 11:10+0200\n"
+"Last-Translator: Kurt De Bree <kdebree(AT)telenet(DOT)be>\n"
+"Language-Team: Debian l10n Dutch <debian-l10n-dutch@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.1\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Wilt u /usr/sbin/hddtemp als SUID root installeren?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "U hebt de optie om hddtemp te installeren met de SUID voor root geactiveerd."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Als u hddtemp SUID maakt, kunnen de niet-bevoorrechte gebruikers van uw  "
+"systemen hddtemp uitvoeren. Dit kan echter gebruikt worden tijdens een aanval "
+"op uw computer. Indien u twijfelt, is het aangeraden te installeren zonder SUID. "
+"Als u later van gedacht veranderd, kan u het volgende uitvoeren: "
+"'dpkg-reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr "Interval tussen twee controles:"
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"hddtemp kan periodiek de temperatuur van de harde schijf(ven) registreren "
+"via de SYSLOG-interface."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Geef een waarde (in seconden) overeenkomend met de interval tussen "
+"twee controles. '0' schakelt deze functie uit."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Wilt u de hddtemp-achtergronddienst uitvoeren tijdens het opstarten?"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"hddtemp kan worden uitgevoerd als achtergronddienst, luisterend naar "
+"inkomende verbindingen op poort 7634. Het wordt gebruikt door sommige "
+"toepassingen, zoals gkrellm, om de temperatuur van de harde schijf(ven) "
+"op te halen."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"U heeft de optie om de hddtemp-achtergronddienst automatisch uit te voeren "
+"tijdens het opstarten van de computer. Bij twijfel is het aangeraden de dienst niet uit "
+"te voeren tijdens het opstarten. Als u later van gedacht veranderd kunt u het "
+"volgende uitvoeren: 'dpkg-reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr "De interface waarop hddtemp moet luisteren:"
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"hddtemp kan naar inkomende verbindingen luisteren op Ã©Ã©n specifieke interface, "
+"maar ook op alle interfaces."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Om op Ã©Ã©n specifieke interface te luisteren, geef het IP-addres van deze "
+"interface (127.0.0.1 is de standaardwaarde dat overeenkomt met de "
+"lo-interface). Om op alle interfaces te luisteren, voer 0.0.0.0. in."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr "De poort waarop hddtemp moet luisteren:"
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Standaard luistert hddtemp naar inkomende berichten op poort 7634. Indien "
+"u deze poort niet passend vindt, kunt u een andere ingeven."
--- hddtemp-0.3-beta15.orig/debian/po/ar.po
+++ hddtemp-0.3-beta15/debian/po/ar.po
@@ -0,0 +1,162 @@
+# translation of ar.po to 
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+#    Developers do not need to manually edit POT or PO files.
+# Ossama M. Khayat, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp_0.3-beta13-19\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2005-07-19 21:38+0300\n"
+"Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
+"Language-Team: Arabic <debian-l10n-arabic@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.9.1\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Ù‡Ù„ ØªØ±ÙŠØ¯ ØªØ«Ø¨ÙŠØª /usr/sbin/hddtemp Ù…Ø¹ SUID rootØŸ"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Ù„Ø¯ÙŠÙƒ Ø®ÙŠØ§Ø± ØªØ«Ø¨ÙŠØª hddtemp Ø¨ØªØ¹ÙŠÙŠÙ† Ø¨Øª SUID."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+#, fuzzy
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Ø¥Ù† Ù‚Ù…Øª Ø¨ØªØ¹ÙŠÙŠÙ† hddtemp SUIDØŒ Ù�Ø³ÙŠØ³ØªØ·ÙŠØ¹ Ø§Ù„Ù…Ø³ØªØ®Ø¯Ù…ÙŠÙ† Ø§Ù„ØºÙŠØ± Ù…Ø®ÙˆÙ„ÙŠÙ† Ù„Ù†Ø¸Ø§Ù…Ùƒ ØªØ´ØºÙŠÙ„Ù‡. "
+"Ù‚Ø¯ ÙŠØªØ³Ø¨Ø¨ Ù‡Ø°Ø§ Ø¹Ù„Ù‰ Ø£ÙŠ Ø­Ø§Ù„ Ø¨Ø§Ù„Ø³Ù…Ø§Ø­ Ø¨Ø§Ø³ØªØ®Ø¯Ø§Ù… hddtemp Ø£Ø«Ù†Ø§Ø¡ Ø§Ù„Ù‡Ø¬ÙˆÙ… Ø§Ù„Ø£Ù…Ù†ÙŠ Ø¹Ù„Ù‰ "
+"Ø­Ø§Ø³Ø¨Ùƒ. Ø¥Ù† ÙƒÙ†Øª Ù�ÙŠ Ø´ÙƒØŒ Ø£Ù‚ØªØ±Ø­ ØªØ«Ø¨ÙŠØªÙ‡ Ø¯ÙˆÙ† ØªØ¹ÙŠÙŠÙ† SUID. Ø¥Ù† Ø¨Ø¯Ù„Øª Ø±Ø£ÙŠÙƒ Ù„Ø§Ø­Ù‚Ø§Ù‹ØŒ ÙŠÙ…ÙƒÙ†Ùƒ "
+"ØªØ´ØºÙŠÙ„: 'dpkg-reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr "ÙŠØ³ØªØ·ÙŠØ¹ hddtemp ØªØ³Ø¬ÙŠÙ„ Ø­Ø±Ø§Ø±Ø© Ø§Ù„Ø£Ù‚Ø±Ø§Øµ Ø§Ù„ØµÙ„Ø¨Ø© Ø¨Ø´ÙƒÙ„ Ø¯ÙˆØ±ÙŠ Ø¹Ø¨Ø± ÙˆØ§Ø¬Ù‡Ø© SYSLOG."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"Ø§Ù„Ø±Ø¬Ø§Ø¡ Ø¥Ø¯Ø®Ø§Ù„ Ø§Ù„Ù‚ÙŠÙ…Ø© Ø¨Ø§Ù„Ø«ÙˆØ§Ù†ÙŠ Ù„Ù„Ù�Ø§ØµÙ„ Ø§Ù„Ø²Ù…Ù†ÙŠ Ø¨ÙŠÙ† ÙƒÙ„ Ù…Ø±Ù‘ØªÙŠÙ‘ ØªØ­Ù‚Ù‘Ù‚. Ù„ØªØ¹Ø·ÙŠÙ„ Ù‡Ø°Ù‡ "
+"Ø§Ù„Ù…ÙŠØ²Ø©ØŒ Ù�Ù‚Ø· Ø£Ø¯Ø®Ù„ 0."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Ù‡Ù„ ØªØ±ÙŠØ¯ ØªØ´ØºÙŠÙ„ Ø¹Ù�Ø±ÙŠØª hddtemp Ø¹Ù†Ø¯ Ø¨Ø¯Ø¡ Ø§Ù„ØªØ´ØºÙŠÙ„ØŸ"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"ÙŠØ³ØªØ·ÙŠØ¹ hddtemp Ø§Ù„Ø¹Ù…Ù„ ÙƒØ¹Ù�Ø±ÙŠØªØŒ Ø¨Ø§Ù„Ø§Ø³ØªÙ…Ø§Ø¹ Ø¹Ù„Ù‰ Ø§Ù„Ù…Ù†Ù�Ø° 7634 Ù„Ù„Ø§ØªØµØ§Ù„Ø§Øª Ø§Ù„ÙˆØ§Ø±Ø¯Ø©. "
+"ØªØ³ØªØ®Ø¯Ù… Ù‡Ø°Ù‡ Ù…Ù† Ù‚Ø¨Ù„ Ø¨Ø¹Ø¶ Ø§Ù„Ø¨Ø±Ø§Ù…Ø¬ Ù…Ø«Ù„ gkrellm Ù„Ù„Ø­ØµÙˆÙ„ Ø¹Ù„Ù‰ Ø­Ø±Ø§Ø±Ø© Ø§Ù„Ø£Ù‚Ø±Ø§Øµ Ø§Ù„ØµÙ„Ø¨Ø©."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+#, fuzzy
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Ù„Ø¯ÙŠÙƒ Ø®ÙŠØ§Ø± ØªØ´ØºÙŠÙ„ Ø¹Ù�Ø±ÙŠØª hddtemp ØªÙ„Ù‚Ø§Ø¦ÙŠØ§Ù‹ Ø¹Ù†Ø¯ Ø¨Ø¯Ø¡ ØªØ´ØºÙŠÙ„ Ø§Ù„Ø­Ø§Ø³Ø¨. Ø¥Ù† ÙƒØ§Ù† Ù„Ø¯ÙŠÙƒ Ø´ÙƒØŒ "
+"Ø£Ù‚ØªØ±Ø­ Ø¹Ø¯Ù… ØªØ´ØºÙŠÙ„Ù‡ Ø¨Ø´ÙƒÙ„ Ø§Ù�ØªØ±Ø§Ø¶ÙŠ Ø¹Ù†Ø¯ Ø¨Ø¯Ø¡ Ø§Ù„ØªØ´ØºÙŠÙ„. Ø¥Ù† Ø¨Ø¯Ù„Øª Ø±Ø£ÙŠÙƒ Ù„Ø§Ø­Ù‚Ø§Ù‹ØŒ ÙŠÙ…ÙƒÙ†Ùƒ "
+"ØªØ´ØºÙŠÙ„: 'dpkg-reconfigure hddtemp'."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"ÙŠØ³ØªØ·ÙŠØ¹ hddtemp Ø§Ù„Ø§Ø³ØªÙ…Ø§Ø¹ Ø¥Ù„Ù‰ Ø§Ù„Ø§ØªØµØ§Ù„Ø§Øª Ø§Ù„ÙˆØ§Ø±Ø¯Ø© Ø¹Ù„Ù‰ ÙˆØ§Ø¬Ù‡Ø© Ù…Ø­Ø¯Ø¯Ø©ØŒ Ø£Ùˆ Ø¹Ù„Ù‰ Ø¬Ù…ÙŠØ¹ "
+"Ø§Ù„ÙˆØ§Ø¬Ù‡Ø§Øª."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Ù„Ù„Ø§Ø³ØªÙ…Ø§Ø¹ Ø¥Ù„Ù‰ ÙˆØ§Ø¬Ù‡Ø© Ù…Ø­Ø¯Ø¯Ø©ØŒ Ø£Ø¯Ø®Ù„ Ø¹Ù†ÙˆØ§Ù† IP Ù„ØªÙ„Ùƒ Ø§Ù„ÙˆØ§Ø¬Ù‡Ø© (127.0.0.1 ÙˆØ§Ù„ØªÙŠ Ù‡ÙŠ "
+"Ø§Ù„Ù‚ÙŠÙ…Ø© Ø§Ù„Ø§Ù�ØªØ±Ø§Ø¶ÙŠØ© Ø§Ù„Ù…Ø±ØªØ¨Ø·Ø© Ø¨ÙˆØ§Ø¬Ù‡Ø© lo). Ù„Ù„Ø§Ø³ØªÙ…Ø§Ø¹ Ø¥Ù„Ù‰ Ø¬Ù…ÙŠØ¹ Ø§Ù„ÙˆØ§Ø¬Ù‡Ø§ØªØŒ Ø¨Ø¨Ø³Ø§Ø·Ø© "
+"Ø£Ø¯Ø®Ù„ 0.0.0.0."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Ø¨Ø´ÙƒÙ„ Ø§Ù�ØªØ±Ø§Ø¶ÙŠØŒ ÙŠØ³ØªÙ…Ø¹ hddtemp Ù„Ù„Ø§ØªØµØ§Ù„Ø§Øª Ø§Ù„ÙˆØ§Ø±Ø¯Ø© Ø¹Ù„Ù‰ Ø§Ù„Ù…Ù†Ù�Ø° 7634. Ø¹Ù„Ù‰ Ø£ÙŠ Ø¥Ù† "
+"ÙˆØ¬Ø¯Øª Ø£Ù† Ù‡Ø°Ø§ Ø§Ù„Ù…Ù†Ù�Ø° ØºÙŠØ± Ù…Ù„Ø§Ø¦Ù…ØŒ ÙŠÙ…ÙƒÙ†Ùƒ Ø¥Ø¯Ø®Ø§Ù„ Ø±Ù‚Ù… Ø¢Ø®Ø±."
+
+#, fuzzy
+#~ msgid "At which interval do you want to log the temperatures?"
+#~ msgstr "ÙƒÙ… Ù…Ø±Ø© ØªØ±ÙŠØ¯ ØªØ³Ø¬ÙŠÙ„ Ø§Ù„Ø­Ø±Ø§Ø±Ø©ØŸ"
+
+#~ msgid "On which interface do you want hddtemp to listen on?"
+#~ msgstr "Ø¹Ù„Ù‰ Ø£ÙŠ ÙˆØ§Ø¬Ù‡Ø© ØªØ±ÙŠØ¯ Ø£Ù† ÙŠØ³ØªÙ…Ø¹ hddtempØŸ"
+
+#~ msgid "On which port do you want hddtemp to listen on?"
+#~ msgstr "Ø¹Ù„Ù‰ Ø£ÙŠ Ù…Ù†Ù�Ø° ØªØ±ÙŠØ¯ Ø£Ù† ÙŠØ³ØªÙ…Ø¹ hddtempØŸ"
--- hddtemp-0.3-beta15.orig/debian/po/ja.po
+++ hddtemp-0.3-beta15/debian/po/ja.po
@@ -0,0 +1,145 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-07-22 05:01-0600\n"
+"PO-Revision-Date: 2006-07-26 22:26+0900\n"
+"Last-Translator: Kenshi Muto <kmuto@debian.org>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "/usr/sbin/hddtemp ã‚’ SUID root ã�§ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«ã�—ã�¾ã�™ã�‹?"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "SUID ãƒ“ãƒƒãƒˆã‚’ã‚»ãƒƒãƒˆã�—ã�¦ hddtemp ã‚’ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«ã�™ã‚‹é�¸æŠžè‚¢ã�§ã�™ã€‚"
+
+#. Type: boolean
+#. Description
+#: ../templates:1001
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr "hddtemp ã‚’ SUID åŒ–ã�™ã‚‹ã�¨ã€�ã�‚ã�ªã�Ÿã�®ã‚·ã‚¹ãƒ†ãƒ ã�®é�žç‰¹æ¨©ãƒ¦ãƒ¼ã‚¶ã�Œã��ã‚Œã‚’å®Ÿè¡Œã�§ã��ã‚‹ã‚ˆã�†ã�«ã�ªã‚Šã�¾ã�™ã€‚ã�“ã‚Œã�¯ã�—ã�‹ã�—ã�ªã�Œã‚‰ã€�hddtemp ã�Œã�‚ã�ªã�Ÿã�®ã‚³ãƒ³ãƒ”ãƒ¥ãƒ¼ã‚¿ã�¸ã�®ã‚»ã‚­ãƒ¥ãƒªãƒ†ã‚£æ”»æ’ƒã�«ä½¿ã‚�ã‚Œã‚‹å�¯èƒ½æ€§ã‚’ç§˜ã‚�ã�¦ã�„ã�¾ã�™ã€‚ç–‘ã‚�ã�—ã�„ã�®ã�§ã�‚ã‚Œã�°ã€�SUID ã�ªã�—ã�«ã‚¤ãƒ³ã‚¹ãƒˆãƒ¼ãƒ«ã�™ã‚‹ã�“ã�¨ã‚’æ��æ¡ˆã�—ã�¾ã�™ã€‚ã�‚ã�¨ã�§æ°—ã�Œå¤‰ã‚�ã�£ã�Ÿã‚‰ã€�'dpkg-reconfigure hddtemp' ã‚’å®Ÿè¡Œã�—ã�¦ã��ã� ã�•ã�„ã€‚"
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid "Interval between two checks:"
+msgstr "ãƒ�ã‚§ãƒƒã‚¯é–“ã�®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ�ãƒ«:"
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+"hddtemp ã�¯ SYSLOG ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹çµŒç”±ã�§å®šæœŸçš„ã�«ãƒ�ãƒ¼ãƒ‰ãƒ‰ãƒ©ã‚¤ãƒ–ã�®æ¸©åº¦ã‚’è¨˜éŒ²ã�§"
+"ã��ã�¾ã�™ã€‚"
+
+#. Type: string
+#. Description
+#: ../templates:2001
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+"ãƒ�ã‚§ãƒƒã‚¯é–“ã�®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ�ãƒ«ã�«ä½¿ã�†ç§’æ•°ã‚’å…¥åŠ›ã�—ã�¦ã��ã� ã�•ã�„ã€‚ã�“ã�®æ©Ÿèƒ½ã‚’ç„¡åŠ¹ã�«ã�™ã‚‹ã�«"
+"ã�¯ã€�å�˜ã�« 0 ã‚’å…¥åŠ›ã�—ã�¦ã��ã� ã�•ã�„ã€‚"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "èµ·å‹•æ™‚ã�« hddtemp ãƒ‡ãƒ¼ãƒ¢ãƒ³ã‚’é–‹å§‹ã�—ã�¾ã�™ã�‹?"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"hddtemp ã�¯ã€�å…¥åŠ›æŽ¥ç¶šã�®ã�Ÿã‚�ã�®ãƒ�ãƒ¼ãƒˆ 7634 ã‚’ãƒªã‚¹ãƒ³ã�™ã‚‹ãƒ‡ãƒ¼ãƒ¢ãƒ³ã�¨ã�—ã�¦å®Ÿè¡Œã�§ã��ã�¾"
+"ã�™ã€‚ãƒ�ãƒ¼ãƒ‰ãƒ‰ãƒ©ã‚¤ãƒ–ã�®æ¸©åº¦ã‚’å¾—ã‚‹ã�Ÿã‚�ã�«ã€�gkrellm ã�®ã‚ˆã�†ã�ªã�„ã��ã�¤ã�‹ã�®ã‚½ãƒ•ãƒˆã‚¦ã‚§ã‚¢"
+"ã�«ã‚ˆã�£ã�¦ä½¿ã‚�ã‚Œã�¾ã�™ã€‚"
+
+#. Type: boolean
+#. Description
+#: ../templates:3001
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr "ã‚³ãƒ³ãƒ”ãƒ¥ãƒ¼ã‚¿ã�®èµ·å‹•æ™‚ã�« hddtemp ãƒ‡ãƒ¼ãƒ¢ãƒ³ã‚’è‡ªå‹•çš„ã�«é–‹å§‹ã�™ã‚‹é�¸æŠžè‚¢ã�§ã�™ã€‚ç–‘ã‚�ã�—ã�„ã�®ã�§ã�‚ã‚Œã�°ã€�èµ·å‹•æ™‚ã�«è‡ªå‹•çš„ã�«ã�¯é–‹å§‹ã�—ã�ªã�„ã�“ã�¨ã‚’æ��æ¡ˆã�—ã�¾ã�™ã€‚ã�‚ã�¨ã�§æ°—ã�Œå¤‰ã‚�ã�£ã�Ÿã‚‰ã€�'dpkg-reconfigure hddtemp' ã‚’å®Ÿè¡Œã�—ã�¦ã��ã� ã�•ã�„ã€‚"
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid "Interface to listen on:"
+msgstr "ãƒªã‚¹ãƒ³ã�™ã‚‹ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹:"
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"hddtemp ã�¯ç‰¹å®šã�®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã�¾ã�Ÿã�¯ã�™ã�¹ã�¦ã�®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã�®å…¥åŠ›æŽ¥ç¶šã‚’ãƒª"
+"ã‚¹ãƒ³ã�§ã��ã�¾ã�™ã€‚"
+
+#. Type: string
+#. Description
+#: ../templates:4001
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"ç‰¹å®šã�®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã‚’ãƒªã‚¹ãƒ³ã�™ã‚‹ã�«ã�¯ã€�ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã�® IP ã‚¢ãƒ‰ãƒ¬ã‚¹ã‚’å…¥åŠ›"
+"ã�—ã�¦ã��ã� ã�•ã�„ (127.0.0.1 ã�¯ lo ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã�«ç›¸å½“ã�™ã‚‹ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆå€¤ã�§ã�™)ã€‚ã�™"
+"ã�¹ã�¦ã�®ã‚¤ãƒ³ã‚¿ãƒ¼ãƒ•ã‚§ã‚¤ã‚¹ã‚’ãƒªã‚¹ãƒ³ã�™ã‚‹ã�«ã�¯ã€�å�˜ç´”ã�« 0.0.0.0 ã‚’å…¥åŠ›ã�—ã�¦ã��ã� ã�•ã�„ã€‚"
+
+#. Type: string
+#. Description
+#: ../templates:5001
+msgid "Port to listen on:"
+msgstr "ãƒªã‚¹ãƒ³ã�™ã‚‹ãƒ�ãƒ¼ãƒˆ:"
+
+#. Type: string
+#. Description
+#: ../templates:5001
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆã�§ã�¯ã€�hddtemp ã�¯ãƒ�ãƒ¼ãƒˆ 7634 ã�§å…¥åŠ›æŽ¥ç¶šã‚’ãƒªã‚¹ãƒ³ã�—ã�¾ã�™ã€‚ã�—ã�‹ã�—ã€�ã‚‚ã�—"
+"ã�“ã�®ãƒ�ãƒ¼ãƒˆã�Œä¸�é�©åˆ‡ã�§ã�ªã�„ã�¨æ€�ã�†ã�®ã�§ã�‚ã‚Œã�°ã€�åˆ¥ã�®ãƒ�ãƒ¼ãƒˆã‚’å…¥åŠ›ã�§ã��ã�¾ã�™ã€‚"
--- hddtemp-0.3-beta15.orig/debian/po/pt_BR.po
+++ hddtemp-0.3-beta15/debian/po/pt_BR.po
@@ -0,0 +1,166 @@
+#
+#    Translators, if you are not familiar with the PO format, gettext
+#    documentation is worth reading, especially sections dedicated to
+#    this format, e.g. by running:
+#         info -n '(gettext)PO Files'
+#         info -n '(gettext)Header Entry'
+#
+#    Some information specific to po-debconf are available at
+#            /usr/share/doc/po-debconf/README-trans
+#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+#    Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: hddtemp_0.3-beta7-1\n"
+"Report-Msgid-Bugs-To: aurel32@debian.org\n"
+"POT-Creation-Date: 2006-05-15 20:12+0200\n"
+"PO-Revision-Date: 2004-12-01 15:48-0300\n"
+"Last-Translator: Tiago Bortoletto Vaz <tiago@debian-ba.org>\n"
+"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "Do you want /usr/sbin/hddtemp to be installed SUID root?"
+msgstr "Deseja que o /usr/sbin/hddtemp seja instalado SUID root ?"
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+msgid "You have the option of installing hddtemp with the SUID bit set."
+msgstr "Você tem a opção de instalar o hddtemp com o bit de SUID ligado."
+
+#. Type: boolean
+#. Description
+#: ../templates:4
+#, fuzzy
+msgid ""
+"If you make hddtemp SUID, unprivileged users of your systems will be able to "
+"run it. This could, however, potentially allow hddtemp to be used during a "
+"security attack on  your computer. If in doubt, it is suggested  to install "
+"it without SUID. If you later change your mind, you can run: 'dpkg-"
+"reconfigure hddtemp'."
+msgstr ""
+"Caso você permita que o hdddtemp seja instalado com o bit de SUID ligado, "
+"usuários não privilegiados de seu sistema serão capazes de executá-lo. Isso "
+"pode, porém, potencialmente permitir que o hddtemp seja usado durante um "
+"ataque contra a segurança de seu computador. Caso esteja em dúvida, é "
+"sugerido que vcê instale o hddtemp sem o bit de SUID ligado. Caso você mude "
+"de idéia posteriormente, você poderá executar o comando 'dpkg-reconfigure "
+"hddtemp' para mudar essa suaconfiguração."
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid "Interval between two checks:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"hddtemp can periodically log the temperature of the hard drive(s) via the "
+"SYSLOG interface."
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:16
+msgid ""
+"Please enter a value in seconds corresponding to the interval between two "
+"checks. To disable this feature, simply enter 0."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid "Do you want to start the hddtemp daemon on startup?"
+msgstr "Deseja iniciar o daemon hddtemp na inicialização do sistema ?"
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+msgid ""
+"hddtemp can be run as a daemon, listening on port 7634 for incoming "
+"connections. It is used some by software such as gkrellm to get the "
+"temperature of the hard drives."
+msgstr ""
+"O hddtemp pode ser executado com um daemon, ouvindo na porta 7634 por "
+"conexões entrantes. O mesmo é usado por alguns softwares como o gkrellm-"
+"hddtemp para obter a temperatura dos discos rígidos."
+
+#. Type: boolean
+#. Description
+#: ../templates:26
+#, fuzzy
+msgid ""
+"You have the option of starting the hddtemp daemon automatically on the "
+"computer startup. If in doubt, it is suggest to not start it automatically "
+"on startup. If you later change your mind, you can run: 'dpkg-reconfigure  "
+"hddtemp'."
+msgstr ""
+"Você tem a opção de iniciar o daemon hddtemp automaticamente na "
+"inicialização de seu computador. Caso esteja em dúvida, é sugerido que você "
+"não inicie o hddtemp automaticamente na inicialização de seu computador. "
+"Caso você mude de idéia posteriormente você poderá executar o comando 'dpkg-"
+"reconfigure hddtemp' para mudar essa configuração."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid "Interface to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"hddtemp can listen for incoming connections on a specific interface, or on  "
+"all interfaces."
+msgstr ""
+"O hddtemp pode ouvir por conexões entrantes em uma interface específica ou "
+"em todas as interfaces."
+
+#. Type: string
+#. Description
+#: ../templates:39
+msgid ""
+"To listen on a specific interface, enter the IP address of that interface  "
+"(127.0.0.1 which is the default value corresponds to the lo interface). To  "
+"listen on all interfaces, simply enter 0.0.0.0."
+msgstr ""
+"Para ouvir em uma interface específica, informe o endereço IP da interface "
+"em questão (o endereço padrão 127.0.0.1 corresponde a interface lo). Para "
+"ouvir e todas as interfaces, simplesmente informe o endereço 0.0.0.0 ."
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid "Port to listen on:"
+msgstr ""
+
+#. Type: string
+#. Description
+#: ../templates:50
+msgid ""
+"By default, hddtemp listen for incoming connections on port 7634. However if "
+"you don't find this port appropriate, you can enter an other one."
+msgstr ""
+"Por padrão, o hddtemp escuta por conexões entrantes na porta 7634. Porém "
+"caso você ache que essa não seja a porta apropriada, você pode informar uma "
+"outra porta."
+
+#, fuzzy
+#~ msgid "At which interval do you want to log the temperatures?"
+#~ msgstr "Em qual interface você deseja que o hddtemp escute ?"
+
+#~ msgid "On which interface do you want hddtemp to listen on?"
+#~ msgstr "Em qual interface você deseja que o hddtemp escute ?"
+
+#~ msgid "On which port do you want hddtemp to listen on?"
+#~ msgstr "Em qual porta você deseja que o hddtemp escute ?"
--- hddtemp-0.3-beta15.orig/debian/README.Debian
+++ hddtemp-0.3-beta15/debian/README.Debian
@@ -0,0 +1,10 @@
+README.Debian for hddtemp
+-------------------------
+
+This package include an init script to run hddtemp in daemon mode. It
+tries to find all disk that support SMART. If you get an error such as 
+'no disks with monitoring capability were found' or if an hard disk is 
+not monitored, try to run 'hddtemp /dev/xxx', with /dev/xxx being you 
+hard disk device. You will see an explanation about why it fails.
+
+-- Aurelien Jarno <aurel32@debian.org>
--- hddtemp-0.3-beta15.orig/debian/postrm
+++ hddtemp-0.3-beta15/debian/postrm
@@ -0,0 +1,28 @@
+#! /bin/sh
+# postrm script for hddtemp
+set -e
+
+conffile="/etc/default/hddtemp"
+
+case "$1" in
+	purge)
+		rm -f $conffile
+        ;;
+	remove)
+		rm -f /usr/bin/hddtemp
+		rm -f /usr/share/man/man1/hddtemp.1.gz
+	;;
+	upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+	;;
+	*)
+        	echo "postrm called with unknown argument \`$1'" >&2
+        	exit 1
+	;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- hddtemp-0.3-beta15.orig/debian/hddtemp.db
+++ hddtemp-0.3-beta15/debian/hddtemp.db
@@ -0,0 +1,169 @@
+#
+# Insert a regular expression for support of the model or the serie of your hard drive.
+# If you don't know what to put in the second field, put the number
+# that appears most often for your brand :o)
+# A value of zero meens that we know that the drive doesn't have
+# a temperature sensor (you can set the unit to C or F).
+#
+############################################################################
+# The following list was found at (http://www.almico.com/forumharddisks.php)
+# If your drive is in the list send me a mail.
+#
+# Manufacturer   Model   Size   Notes
+# FUJITSU FUJITSU MPF3102AH 10.0GB
+# FUJITSU FUJITSU MPG3204AH E 20.0GB
+# FUJITSU FUJITSU MPG3307AT 30.0GB
+# FUJITSU FUJITSU MPG3409AH 40.0GB
+# FUJITSU FUJITSU MPG3409AH EF 40.0GB
+# HITACHI HITACHI_DK23CA-10 9.8GB
+# HITACHI HITACHI_DK23CA-15 14.7GB
+# SAMSUNG SAMSUNG SV3012H 29.4GB
+# SEAGATE ST310210A 10.0GB
+# SEAGATE ST310211A 9.8GB
+# SEAGATE ST310215A 10.0GB
+# SEAGATE ST315320A 14.9GB
+# SEAGATE ST320410A 19.6GB
+# SEAGATE ST320413A 19.6GB
+# SEAGATE ST320420A 19.9GB
+# SEAGATE ST330610A 29.3GB
+# SEAGATE ST330620A 29.3GB
+# SEAGATE ST330621A 29.3GB
+# SEAGATE ST330630A 29.9GB
+# SEAGATE ST340016A 39.1GB
+# SEAGATE ST340810ACE 39.1GB
+# SEAGATE ST380020ACE 78.2GB
+# WESTERN DIGITAL WDC AC210200D 10.0GB
+# WESTERN DIGITAL WDC AC29100D 8.9GB
+# WESTERN DIGITAL WDC AC420400D 19.9GB
+# WESTERN DIGITAL WDC WD102AA 10.0GB
+#
+#################################################
+
+########################################
+############# ExcelStor drives
+########################################
+# "ExcelStor Technology CT215"    ??? ? "ExcelStor CT215"
+
+
+########################################
+############# Fujitsu drives
+########################################
+"FUJITSU MHM2100AT"		0    C  "Fujitsu MHM2100AT"
+
+
+########################################
+############# Hitachi drives
+########################################
+"HITACHI_DK228A-65"		0    C  "Hitachi DK228A-65"
+
+
+########################################
+############# IBM drives
+########################################
+
+# DJSA serie is using F0h command to report temperature and also have
+# SMART capabilties but it was reported not to work.
+# "DJSA-2(30|32|10|20|05)"	0    C  "IBM Travelstar 20GN, 32GH, 30GT series"
+
+"IBM-DARA-212000"               0    C  "IBM Travelstar 12GN"
+"IBM-DTTA-35*"			0    C  "IBM Deskstar 16GP serie"
+
+# according to specifications they do not seems to have sensor
+# but I prefer waiting for a report
+#"IBM-DTTA-37*"			0    C  "IBM Deskstar 14GXP serie"
+
+"IBM-DJNA-35.*"                 231  C  "IBM Deskstar 25 GP serie"
+"IBM-DJNA-37.*"                 231  C  "IBM Deskstar 22 GXP serie"
+"IBM-DHEA-(34330|36480)"	0    C  "IBM Deskstar 5 serie"
+"IBM-DHEA-(34331|36481|38451)"	0    C  "IBM Deskstar 8 serie"
+"IBM-DPTA-37.*"                 231  C  "IBM Deskstar 34GXP serie"
+"IBM-DPTA-35.*"                 231  C  "IBM Deskstar 37GP serie"
+
+
+########################################
+############# Maxtor drives
+########################################
+#"Maxtor 2B0[012][04568]H1"				???  C  "Maxtor Fireball 541DX"
+# which one must I trust ?
+#"Maxtor 4D040H2"					9    C	"Maxtor DiamondMax D540X-4D"
+#"Maxtor 4D040H2"                        		0    C  "Maxtor 4D040H2"
+#"Maxtor 4D080H4"					12   C	"Maxtor DiamondMax D540X-4D"
+#"Maxtor 4D060H3"					12   C	"Maxtor DiamondMax D540X-4D"
+#"Maxtor 4D080H4"					9    C	"Maxtor DiamondMax D540X-4D"
+"Maxtor 5(1024|1369|2049|2732|3073|4098)U(2|3|4|6|8)"	0    C	"Maxtor DiamondMax Plus 40"
+"Maxtor 5T0[24]0H[24]"					0    C  "Maxtor DiamondMax Plus 60"
+"Maxtor 94098U8"			 		11   C  "Maxtor DiamondMax 40 94098U8"
+
+
+########################################
+############# Quantum drives
+########################################
+"QUANTUM FIREBALLP AS40.0"		0  C  "Quantum Fireball AS40"
+"QUANTUM FIREBALL CX10.2A"		0  C  "Quantum Fireball CX10.2A"
+#"QUANTUM FIREBALLlct10 20"		4  C  "Quantum Fireball CT10 20GB"
+# I suspect the QUANTUM FIREBALL_TM2110A to have a sensor in field 9...
+# "QUANTUM FIREBALL_TM2110A"		9  C  "Quantum Fireball TM2110A"
+
+
+########################################
+############# Samsung drives
+########################################
+# somenone reported a problem with the SP8004H which reports a temperature
+# 10°C below the ambient temperature
+"SAMSUNG SW0434A"					0    C  "Samsung SW0434A"
+"SAMSUNG SV0432A"					0    C  "Samsung SV0432A"
+"SAMSUNG SV3002H"					0    C  "Samsung SpinPoint V30 serie"
+#"SAMSUNG SV(0221|0602|0813|1204)H"			9    C  "Samsung SpinPoint V60 serie"
+
+
+########################################
+############# Seagate drives
+########################################
+"Seagate Technology 1275MB - ST31276A"	0    C  "Seagate ST31276A"
+"ST3412A"				0    C  "Seagate ST3412A"
+"ST38641A"                              0    C  "Seagate ST38641A"
+"ST310210A"				0    C  "Seagate ST310210A"
+"ST310220A"				0    C  "Seagate ST310220A"
+# SEAGATE ST313021A 13.0GB
+"ST313021A"                             0    C  "Seagate U8 ST313021A"
+"ST310240A"				0    C  "Seagate Medalist 10240 Ultra ATA-3"
+"ST320423A"				0    C  "Seagate U10 20423, Ultra ATA/66"
+
+
+########################################
+############# TOSHIBA Laptops
+########################################
+"MK4313MAT"				220  C  "Toshiba MK4313MAT"
+"TOSHIBA MK1517GAP"			0    C  "Toshiba MK1517GAP"
+"TOSHIBA MK2018GAS"			226  F  "Toshiba MK2018GAS"
+
+"TOSHIBA MK3017GAP"			0    C  "Toshiba MK3017GAP"
+
+#"TOSHIBA MK4019GAX"			222  C  "Toshiba MK4019GAX"
+
+
+########################################
+############# Western Digital drives
+########################################
+# WDC AC310100B and WDC AC2850F are reported not working
+# no more informations were given
+"WDC AC22000L"							  0 C "Western Digital Caviar AC22000"
+"WDC AC420400D"                 				231 C "Western Digital Caviar AC420400D"
+"WDC AC418000D"							231 C "Western Digital AC418000D"
+"WDC WD135BA"							231 C "Western Digital WD135BA"
+
+"WDC WD100EB-00BHF0"            				  0 C "Western Digital 100EB-00BHF0"
+"WDC WD200BB-00AUA1"            				  0 C "Western Digital Caviar WD200BB"
+#"WDC WD200BB-60DGA0"						  0 C "Western Digital Caviar WD200BB"
+"WDC WD300BB-00CAA0"						  0 C "Western Digital WD300BB"
+"WDC WD400BB-00CAA0"						  0 C "Western Digital 400BB-00CAA0"
+#"WDC WD400BB-00GFA0"						  0 C ""
+"WDC WD400BB-(18CA|00DE)A0"     				  0 C "Western Digital Caviar WD400BB"
+"WDC WD400EB-00CPF0"						  0 C "Western Digital 400EB-00CPF0"
+"WDC WD600BB-32BSA0"						  0 C "Western Digital 600BB-32BSA0"
+"WDC WD800BB-00CAA1"						  0 C "Western Digital WD800BB-00CAA1"
+"WDC WD800JB-00CRA1"            				  0 C "Western Digital Caviar WD800JB"
+
+# not sure for next
+# "WDC WD1200JB-00CRA1"		9   C "Western Digital 1200JB-00CRA1"
+# "WDC WD273BA"			9   C "Western Digital WD273BA"
--- hddtemp-0.3-beta15.orig/debian/logcheck.ignore.server
+++ hddtemp-0.3-beta15/debian/logcheck.ignore.server
@@ -0,0 +1,2 @@
+^\w{3} [ :0-9]{11} [._[:alnum:]-]+ hddtemp\[[0-9]+\]: /dev/([hs]d[a-z]|sg[0-9]): .*: [0-9]+ [CF]$
+^\w{3} [ :0-9]{11} [._[:alnum:]-]+ hddtemp\[[0-9]+\]: /dev/([hs]d[a-z]|sg[0-9]): .*: drive is sleeping$
--- hddtemp-0.3-beta15.orig/debian/templates
+++ hddtemp-0.3-beta15/debian/templates
@@ -0,0 +1,52 @@
+Template: hddtemp/SUID_bit
+Type: boolean
+Default: false
+_Description: Do you want /usr/sbin/hddtemp to be installed SUID root?
+ You have the option of installing hddtemp with the SUID bit set.
+ .
+ If you make hddtemp SUID, unprivileged users of your systems will be able
+ to run it. This could, however, potentially allow hddtemp to be used
+ during a security attack on  your computer. If in doubt, it is suggested 
+ to install it without SUID. If you later change your mind, you can run:
+ 'dpkg-reconfigure hddtemp'.
+
+Template: hddtemp/syslog
+Type: string
+Default: 0
+_Description: Interval between two checks:
+ hddtemp can periodically log the temperature of the hard drive(s) via
+ the SYSLOG interface.
+ .
+ Please enter a value in seconds corresponding to the interval between
+ two checks. To disable this feature, simply enter 0.
+
+Template: hddtemp/daemon
+Type: boolean
+Default: false
+_Description: Do you want to start the hddtemp daemon on startup?
+ hddtemp can be run as a daemon, listening on port 7634 for incoming
+ connections. It is used some by software such as gkrellm to get
+ the temperature of the hard drives.
+ .
+ You have the option of starting the hddtemp daemon automatically on the
+ computer startup. If in doubt, it is suggest to not start it automatically
+ on startup. If you later change your mind, you can run: 'dpkg-reconfigure 
+ hddtemp'.
+
+Template: hddtemp/interface
+Type: string
+Default: 127.0.0.1
+_Description: Interface to listen on:
+ hddtemp can listen for incoming connections on a specific interface, or on 
+ all interfaces. 
+ .
+ To listen on a specific interface, enter the IP address of that interface 
+ (127.0.0.1 which is the default value corresponds to the lo interface). To 
+ listen on all interfaces, simply enter 0.0.0.0.
+
+Template: hddtemp/port
+Type: string
+Default: 7634
+_Description: Port to listen on:
+ By default, hddtemp listen for incoming connections on port 7634. However
+ if you don't find this port appropriate, you can enter an other one.
--- hddtemp-0.3-beta15.orig/debian/dirs
+++ hddtemp-0.3-beta15/debian/dirs
@@ -0,0 +1,3 @@
+etc/init.d
+etc/default
+usr/share/doc/hddtemp
--- hddtemp-0.3-beta15.orig/src/hddtemp.c
+++ hddtemp-0.3-beta15/src/hddtemp.c
@@ -75,7 +75,7 @@
 char               separator = SEPARATOR;
 
 struct bustype *   bus[BUS_TYPE_MAX];
-int                tcp_daemon, debug, quiet, numeric, wakeup, af_hint;
+int                tcp_daemon, debug, quiet, numeric, wakeup, foreground, af_hint;
 
 static enum { DEFAULT, CELSIUS, FAHRENHEIT } unit;
 
@@ -194,21 +194,12 @@
     if (numeric && quiet)
       printf("0\n");      
     else
-      printf(_("%s: %s:  no sensor\n"), dsk->drive, dsk->model);
+      fprintf(stderr, _("%s: %s:  no sensor\n"), dsk->drive, dsk->model);
 
     break;
   case GETTEMP_GUESS:
-
-    if(!quiet)
-      fprintf(stderr,
-	      _("WARNING: Drive %s doesn't appear in the database of supported drives\n"
-		"WARNING: But using a common value, it reports something.\n"
-		"WARNING: Note that the temperature shown could be wrong.\n"
-		"WARNING: See --help, --debug and --drivebase options.\n"
-		"WARNING: And don't forget you can add your drive to hddtemp.db\n"), dsk->drive);
-
     if (! numeric)
-      printf(_("%s: %s:  %d%sC or %sF\n"), dsk->drive, dsk->model, dsk->value, degree, degree);
+      printf(_("%s: %s: %d%sC\n"), dsk->drive, dsk->model, dsk->value, degree);
     else
       printf("%d\n", value_to_unit(dsk));
 
@@ -232,14 +223,14 @@
     if (numeric && quiet)
       printf("0\n");      
     else
-      printf(_("%s: %s: drive is sleeping\n"), dsk->drive, dsk->model);
+      fprintf(stderr, _("%s: %s: drive is sleeping\n"), dsk->drive, dsk->model);
 
     break;
   case GETTEMP_NOSENSOR:
     if (numeric && quiet)
       printf("0\n");      
     else
-      printf(_("%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"), dsk->drive, dsk->model);
+      fprintf(stderr, _("%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"), dsk->drive, dsk->model);
       
     break;
   default:
@@ -279,7 +270,7 @@
   bindtextdomain (PACKAGE, LOCALEDIR);
   textdomain (PACKAGE);
   
-  show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = 0;
+  show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = foreground = 0;
   unit = DEFAULT;
   portnum = PORT_NUMBER;
   listen_addr = NULL;
@@ -294,6 +285,7 @@
       {"drivebase",  0, NULL, 'b'},
       {"debug",      0, NULL, 'D'},
       {"file",       1, NULL, 'f'},
+      {"foreground", 0, NULL, 'F'},
       {"listen",     1, NULL, 'l'},
       {"version",    0, NULL, 'v'},
       {"port",       1, NULL, 'p'},
@@ -305,7 +297,7 @@
       {0, 0, 0, 0}
     };
  
-    c = getopt_long (argc, argv, "bDdf:l:hp:qs:u:vnw46S:", long_options, &lindex);
+    c = getopt_long (argc, argv, "bDdf:l:hp:qs:u:vnw46FS:", long_options, &lindex);
     if (c == -1)
       break;
     
@@ -382,6 +374,7 @@
 		 "                        (done for every drive supplied).\n"
 		 "  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by default.)\n"
 		 "  -f   --file=FILE   :  specify database file to use.\n"
+		 "  -F   --foreground  :  don't daemonize, stay in foreground.\n"
 		 "  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon mode).\n"
                  "  -n   --numeric     :  print only the temperature.\n"
 		 "  -p   --port=#      :  port to listen to (in TCP/IP daemon mode).\n"
@@ -418,6 +411,9 @@
 	  }
         }
 	break;
+      case 'F':
+        foreground = 1;
+	break;
       default:
 	exit(1);
       }
--- hddtemp-0.3-beta15.orig/src/daemon.c
+++ hddtemp-0.3-beta15/src/daemon.c
@@ -163,19 +163,22 @@
 
     switch(dsk->ret) {
     case GETTEMP_NOT_APPLICABLE:
-      n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
+      n = snprintf(msg, sizeof(msg), "%s%c%s%cNA%c*",
                    dsk->drive, separator,
                    dsk->model, separator,
-                   "NA",       separator,
-                   '*');
+                   separator);
       break;
-    case GETTEMP_GUESS:
     case GETTEMP_UNKNOWN:
-      n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
+      n = snprintf(msg, sizeof(msg), "%s%c%s%cUNK%c*",
                    dsk->drive, separator,
-                   dsk->model, separator,
-                   "UNK",     separator,
-                   '*');
+                   dsk->model, separator, 
+		   separator);
+      break;
+    case GETTEMP_GUESS:
+      n = snprintf(msg, sizeof(msg), "%s%c%s%c%d%cC",
+                   dsk->drive,          separator,
+                   dsk->model,          separator,
+                   dsk->value,          separator);
       break;
     case GETTEMP_KNOWN:
       n = snprintf(msg, sizeof(msg), "%s%c%s%c%d%c%c",
@@ -185,26 +188,23 @@
                    get_unit(dsk));
       break;
     case GETTEMP_NOSENSOR:
-      n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
+      n = snprintf(msg, sizeof(msg), "%s%c%s%cNOS%c*",
                    dsk->drive, separator,
                    dsk->model, separator,
-                   "NOS",      separator,
-                   '*');
+                   separator);
       break;
     case GETTEMP_DRIVE_SLEEP:
-      n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
+      n = snprintf(msg, sizeof(msg), "%s%c%s%cSLP%c*",
                    dsk->drive, separator,
                    dsk->model, separator,
-                   "SLP",      separator,
-                   '*');
+                   separator);
       break;
     case GETTEMP_ERROR:
     default:
-      n = snprintf(msg, sizeof(msg), "%s%c%s%c%s%c%c",
+      n = snprintf(msg, sizeof(msg), "%s%c%s%cERR%c*",
                    dsk->drive,                        separator,
                    (dsk->model) ? dsk->model : "???", separator,
-                   "ERR",                             separator,
-                   '*');
+                   separator);
       break;
     }
     write(cfd,&separator, 1);
@@ -222,14 +222,17 @@
   for(dsk = ldisks; dsk; dsk = dsk->next) {
     switch(dsk->ret) {
     case GETTEMP_KNOWN:
-    case GETTEMP_GUESS:
-      value_to_unit(dsk);
-
       syslog(LOG_INFO, "%s: %s: %d %c", 
              dsk->drive,
 	     dsk->model,
-	     dsk->value,
-	     dsk->db_entry->unit);
+	     value_to_unit(dsk),
+	     get_unit(dsk));
+      break;
+    case GETTEMP_GUESS:
+      syslog(LOG_INFO, "%s: %s: %d C", 
+	     dsk->drive,
+	     dsk->model,
+	     dsk->value);
       break;
     case GETTEMP_DRIVE_SLEEP:
       syslog(LOG_WARNING, _("%s: %s: drive is sleeping"), 
@@ -270,28 +273,30 @@
   fd_set             deffds;
   time_t             next_time;
 
-  switch(fork()) {
-  case -1:
-    perror("fork");
-    exit(2);
-    break;
-  case 0:
-    break;
-  default:
-    exit(0);
-  }
-  
-  setsid();
-  
-  switch(fork()) {
-  case -1:
-    perror("fork");
-    exit(2);
-    break;
-  case 0:
-    break;
-  default:
-    exit(0);
+if (!foreground) {
+    switch(fork()) {
+    case -1:
+      perror("fork");
+      exit(2);
+      break;
+    case 0:
+      break;
+    default:
+      exit(0);
+    }
+
+    setsid();
+
+    switch(fork()) {
+    case -1:
+      perror("fork");
+      exit(2);
+      break;
+    case 0:
+      break;
+    default:
+      exit(0);
+    }
   }
   chdir("/");
   umask(0);
--- hddtemp-0.3-beta15.orig/src/hddtemp.h
+++ hddtemp-0.3-beta15/src/hddtemp.h
@@ -78,7 +78,7 @@
 
 extern struct bustype *   bus[BUS_TYPE_MAX];
 extern char               errormsg[MAX_ERRORMSG_SIZE];
-extern int                tcp_daemon, debug, quiet, wakeup, af_hint;
+extern int                tcp_daemon, debug, quiet, wakeup, af_hint, foreground;
 extern char               separator;
 extern long               portnum, syslog_interval;
 extern char *             listen_addr;
--- hddtemp-0.3-beta15.orig/po/hddtemp.pot
+++ hddtemp-0.3-beta15/po/hddtemp.pot
@@ -1,35 +1,22 @@
-
-# Copyright (C) 2006 Free Software Foundation, Inc.
-# This file is distributed under the same license as the 'hddtemp' package.
-# Emmanuel VARAGNAT <hddtemp@guzu.net>, 2006.
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
 #, fuzzy
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: hddtemp@guzu.net\n"
-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-06-29 16:24+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: Emmanuel Varagnat <hddtemp@guzu.net>\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=CHARSET\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: src/hddtemp.c:112
-#, c-format
-msgid ""
-"\n"
-"Regexp%s| Value | Description\n"
-"------%s---------------------\n"
-msgstr ""
-
-#: src/hddtemp.c:118
-#, c-format
-msgid "%s%s| %5d | %s\n"
-msgstr ""
-
-#: src/hddtemp.c:161
+#: src/hddtemp.c:156
 #, c-format
 msgid ""
 "\n"
@@ -38,7 +25,7 @@
 "\n"
 msgstr ""
 
-#: src/hddtemp.c:188
+#: src/hddtemp.c:189
 #, c-format
 msgid ""
 "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
@@ -47,67 +34,59 @@
 "WARNING: See --help, --debug and --drivebase options.\n"
 msgstr ""
 
-#: src/hddtemp.c:192
-#, c-format
-msgid "%s: %s:  no sensor\n"
-msgstr ""
-
 #: src/hddtemp.c:197
 #, c-format
-msgid ""
-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
-"WARNING: But using a common value, it reports something.\n"
-"WARNING: Note that the temperature shown could be wrong.\n"
-"WARNING: See --help, --debug and --drivebase options.\n"
-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
+msgid "%s: %s:  no sensor\n"
 msgstr ""
 
-#: src/hddtemp.c:202
+#: src/hddtemp.c:211
 #, c-format
 msgid "%s: %s:  %d%sC or %sF\n"
 msgstr ""
 
-#: src/hddtemp.c:214
+#: src/hddtemp.c:235
 #, c-format
 msgid "%s: %s: drive is sleeping\n"
 msgstr ""
 
-#: src/hddtemp.c:217
+#: src/hddtemp.c:242
 #, c-format
-msgid "%s: %s:  known drive, but it doesn't have a temperature sensor.\n"
+msgid "%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"
 msgstr ""
 
-#: src/hddtemp.c:220
+#: src/hddtemp.c:246
 #, c-format
 msgid "ERROR: %s: %s: unknown returned status\n"
 msgstr ""
 
-#: src/hddtemp.c:235
+#: src/hddtemp.c:261
 #, c-format
 msgid ""
 "\n"
 "If one of the field value seems to match the temperature, be sure to read\n"
-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
+"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
 msgstr ""
 
-#: src/hddtemp.c:308
+#: src/hddtemp.c:338
 #, c-format
 msgid "ERROR: invalid separator.\n"
 msgstr ""
 
-#: src/hddtemp.c:319
+#: src/hddtemp.c:349
 #, c-format
 msgid "ERROR: invalid port number.\n"
 msgstr ""
 
-#: src/hddtemp.c:329
+#: src/hddtemp.c:371
 #, c-format
 msgid ""
-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
+" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
 "\n"
 "   hddtemp displays the temperature of drives supplied in argument.\n"
 "   Drives must support S.M.A.R.T.\n"
 "\n"
+"  TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
+"\n"
 "  -b   --drivebase   :  display database file content that allow hddtemp to\n"
 "                        recognize supported drives.\n"
 "  -D   --debug       :  display various S.M.A.R.T. fields and their values.\n"
@@ -117,6 +96,7 @@
 "  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by "
 "default.)\n"
 "  -f   --file=FILE   :  specify database file to use.\n"
+"  -F   --foreground  :  don't daemonize, stay in foreground.\n"
 "  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon "
 "mode).\n"
 "  -n   --numeric     :  print only the temperature.\n"
@@ -124,6 +104,8 @@
 "  -s   --separator=C :  separator to use between fields (in TCP/IP daemon "
 "mode).\n"
 "  -S   --syslog=s    :  log temperature to syslog every s seconds.\n"
+"  -u   --unit=[C|F]  :  force output temperature either in Celius or "
+"Fahrenheit.\n"
 "  -q   --quiet       :  do not check if the drive is supported.\n"
 "  -v   --version     :  display hddtemp version number.\n"
 "  -w   --wake-up     :  wake-up the drive if need.\n"
@@ -133,58 +115,69 @@
 "Report bugs or new drives to <hddtemp@guzu.net>.\n"
 msgstr ""
 
-#: src/hddtemp.c:522
+#: src/hddtemp.c:402
 #, c-format
 msgid "hddtemp version %s\n"
 msgstr ""
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:418
 #, c-format
 msgid "ERROR: invalid interval.\n"
 msgstr ""
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:438
+#, c-format
 msgid "Too few arguments: you must specify one drive, at least.\n"
 msgstr ""
 
-#: src/hddtemp.c:557
+#: src/hddtemp.c:448
+#, c-format
 msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
 msgstr ""
 
-#: src/hddtemp.c:583
+#: src/hddtemp.c:505
 #, c-format
 msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
 msgstr ""
 
-#: src/ata.c:66 src/scsi.c:68
+#: src/ata.c:66 src/scsi.c:64
 msgid "unknown"
 msgstr ""
 
-#: src/ata.c:98
+#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
 #, c-format
-msgid "field(%d)\t = %d\n"
+msgid "S.M.A.R.T. not available"
 msgstr ""
 
-#: src/ata.c:167
-msgid "S.M.A.R.T. not available"
+#: src/db.c:115
+#, c-format
+msgid ""
+"\n"
+"Regexp%s| Value | Description\n"
+"------%s---------------------\n"
+msgstr ""
+
+#: src/db.c:121
+#, c-format
+msgid "%s%s| %5d | %s\n"
 msgstr ""
 
-#: src/db.c:180
+#: src/db.c:236
 #, c-format
 msgid "hddtemp: can't open %1$s: %2$s\n"
 msgstr ""
 
-#: src/db.c:194
+#: src/db.c:250
 #, c-format
 msgid "ERROR: syntax error at line %1$d in %2$s\n"
 msgstr ""
 
-#: src/db.c:201
+#: src/db.c:257
 #, c-format
 msgid "  ERROR: line exceed %1$d characters in %2$s.\n"
 msgstr ""
 
-#: src/scsi.c:112 src/scsi.c:130
+#: src/scsi.c:111 src/scsi.c:129
 #, c-format
 msgid "log sense failed : %s"
 msgstr ""
--- hddtemp-0.3-beta15.orig/po/fr.po
+++ hddtemp-0.3-beta15/po/fr.po
@@ -7,8 +7,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: fr\n"
-"Report-Msgid-Bugs-To: hddtemp@guzu.net\n"
-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-06-29 16:24+0200\n"
 "PO-Revision-Date: 2003-06-03 00:58GMT+1\n"
 "Last-Translator: Aurelien Jarno <aurelien@aurel32.net>\n"
 "Language-Team: FRANCAIS <fr@li.org>\n"
@@ -17,23 +17,7 @@
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 1.0.1\n"
 
-#: src/hddtemp.c:112
-#, c-format
-msgid ""
-"\n"
-"Regexp%s| Value | Description\n"
-"------%s---------------------\n"
-msgstr ""
-"\n"
-"Regexp%s| Valeur | Description\n"
-"------%s----------------------\n"
-
-#: src/hddtemp.c:118
-#, c-format
-msgid "%s%s| %5d | %s\n"
-msgstr "%s%s|  %5d | %s\n"
-
-#: src/hddtemp.c:161
+#: src/hddtemp.c:156
 #, c-format
 msgid ""
 "\n"
@@ -46,7 +30,7 @@
 "Modèle: %s\n"
 "\n"
 
-#: src/hddtemp.c:188
+#: src/hddtemp.c:189
 #, c-format
 msgid ""
 "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
@@ -60,75 +44,60 @@
 "net).\n"
 "ATTENTION : Voir les options --help, --debug et --drivebase.\n"
 
-#: src/hddtemp.c:192
+#: src/hddtemp.c:197
 #, c-format
 msgid "%s: %s:  no sensor\n"
 msgstr "%s: %s :  pas de capteur\n"
 
-#: src/hddtemp.c:197
-#, c-format
-msgid ""
-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
-"WARNING: But using a common value, it reports something.\n"
-"WARNING: Note that the temperature shown could be wrong.\n"
-"WARNING: See --help, --debug and --drivebase options.\n"
-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
-msgstr ""
-"ATTENTION : Le lecteur %s n'apparait pas dans la base de données des "
-"lecteurs supportés\n"
-"ATTENTION : Mais en utilisant une valeur courante, il renvoie quelque "
-"chose.\n"
-"ATTENTION : Notez que la température renvoyée peut être erronée.\n"
-"ATTENTION : Voir les options --help, --debug et --drivebase.\n"
-"ATTENTION : Et n'oubliez pas d'ajouter votre lecteur au fichier hddtemp.db\n"
-
-#: src/hddtemp.c:202
+#: src/hddtemp.c:211
 #, c-format
 msgid "%s: %s:  %d%sC or %sF\n"
 msgstr "%s: %s :  %d%sC ou %sF\n"
 
-#: src/hddtemp.c:214
+#: src/hddtemp.c:235
 #, c-format
 msgid "%s: %s: drive is sleeping\n"
 msgstr "%s: %s : le lecteur est en veille\n"
 
-#: src/hddtemp.c:217
+#: src/hddtemp.c:242
 #, c-format
-msgid "%s: %s:  known drive, but it doesn't have a temperature sensor.\n"
+msgid "%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"
 msgstr ""
 "%s: %s:  lecteur connu, mais il ne possède pas de capteur de température.\n"
 
-#: src/hddtemp.c:220
+#: src/hddtemp.c:246
 #, c-format
 msgid "ERROR: %s: %s: unknown returned status\n"
 msgstr "ERREUR : %s : %s : status inconnu\n"
 
-#: src/hddtemp.c:235
+#: src/hddtemp.c:261
 #, c-format
 msgid ""
 "\n"
 "If one of the field value seems to match the temperature, be sure to read\n"
-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
+"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
 msgstr ""
 
-#: src/hddtemp.c:308
+#: src/hddtemp.c:338
 #, c-format
 msgid "ERROR: invalid separator.\n"
 msgstr "ERREUR : séparateur invalide.\n"
 
-#: src/hddtemp.c:319
+#: src/hddtemp.c:349
 #, c-format
 msgid "ERROR: invalid port number.\n"
 msgstr "ERREUR : numéro de port invalide.\n"
 
-#: src/hddtemp.c:329
-#, fuzzy, c-format
+#: src/hddtemp.c:371
+#, c-format
 msgid ""
-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
+" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
 "\n"
 "   hddtemp displays the temperature of drives supplied in argument.\n"
 "   Drives must support S.M.A.R.T.\n"
 "\n"
+"  TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
+"\n"
 "  -b   --drivebase   :  display database file content that allow hddtemp to\n"
 "                        recognize supported drives.\n"
 "  -D   --debug       :  display various S.M.A.R.T. fields and their values.\n"
@@ -138,6 +107,7 @@
 "  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by "
 "default.)\n"
 "  -f   --file=FILE   :  specify database file to use.\n"
+"  -F   --foreground  :  don't daemonize, stay in foreground.\n"
 "  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon "
 "mode).\n"
 "  -n   --numeric     :  print only the temperature.\n"
@@ -145,6 +115,8 @@
 "  -s   --separator=C :  separator to use between fields (in TCP/IP daemon "
 "mode).\n"
 "  -S   --syslog=s    :  log temperature to syslog every s seconds.\n"
+"  -u   --unit=[C|F]  :  force output temperature either in Celius or "
+"Fahrenheit.\n"
 "  -q   --quiet       :  do not check if the drive is supported.\n"
 "  -v   --version     :  display hddtemp version number.\n"
 "  -w   --wake-up     :  wake-up the drive if need.\n"
@@ -172,6 +144,7 @@
 "défaut).\n"
 "  -f   --file=FILE   :  specifie le fichier à utiliser comme base de "
 "données.\n"
+"  -F   --foreground  :  ne pas démoniser, rester au premier plan.\n"
 "  -l   --listen=addr :  écoute sur une interface spécifique (en mode démon "
 "TCP/IP).\n"
 "  -n   --numeric     :  affiche seulement la température.\n"
@@ -188,62 +161,95 @@
 "\n"
 "Report bugs or new drives to <hddtemp@guzu.net>.\n"
 
-#: src/hddtemp.c:522
+#: src/hddtemp.c:402
 #, c-format
 msgid "hddtemp version %s\n"
 msgstr "hddtemp version %s\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:418
 #, c-format
 msgid "ERROR: invalid interval.\n"
 msgstr "ERREUR : intervalle invalide.\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:438
+#, c-format
 msgid "Too few arguments: you must specify one drive, at least.\n"
 msgstr "Trop peu d'arguments : vous devez spécifier au moins un lecteur.\n"
 
-#: src/hddtemp.c:557
+#: src/hddtemp.c:448
+#, c-format
 msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
 msgstr ""
 "ERREUR: impossible d'utiliser les options --debug et --daemon ou --syslog en "
 "même temps.\n"
 
-#: src/hddtemp.c:583
+#: src/hddtemp.c:505
 #, c-format
 msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
 msgstr ""
 "ERREUR: %s: impossible de déterminer le type de bus (ou ce type de bus est "
 "inconnu)\n"
 
-#: src/ata.c:66 src/scsi.c:68
+#: src/ata.c:66 src/scsi.c:64
 msgid "unknown"
 msgstr "inconnu"
 
-#: src/ata.c:98
+#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
 #, c-format
-msgid "field(%d)\t = %d\n"
-msgstr "champ(%d)\t = %d\n"
-
-#: src/ata.c:167
 msgid "S.M.A.R.T. not available"
 msgstr "S.M.A.R.T. non disponible"
 
-#: src/db.c:180
+#: src/db.c:115
+#, c-format
+msgid ""
+"\n"
+"Regexp%s| Value | Description\n"
+"------%s---------------------\n"
+msgstr ""
+"\n"
+"Regexp%s| Valeur | Description\n"
+"------%s----------------------\n"
+
+#: src/db.c:121
+#, c-format
+msgid "%s%s| %5d | %s\n"
+msgstr "%s%s|  %5d | %s\n"
+
+#: src/db.c:236
 #, c-format
 msgid "hddtemp: can't open %1$s: %2$s\n"
 msgstr "hddtemp: ne peut ouvrir %1$s: %2$s\n"
 
-#: src/db.c:194
+#: src/db.c:250
 #, c-format
 msgid "ERROR: syntax error at line %1$d in %2$s\n"
 msgstr "ERREUR: erreur de syntaxe à la ligne %1$d: %2$s\n"
 
-#: src/db.c:201
+#: src/db.c:257
 #, c-format
 msgid "  ERROR: line exceed %1$d characters in %2$s.\n"
 msgstr "  ERREUR: ligne exécdant %1$d caractères dans %2$s.\n"
 
-#: src/scsi.c:112 src/scsi.c:130
+#: src/scsi.c:111 src/scsi.c:129
 #, c-format
 msgid "log sense failed : %s"
 msgstr "echec de 'log sense' : %s "
+
+#~ msgid ""
+#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
+#~ "WARNING: But using a common value, it reports something.\n"
+#~ "WARNING: Note that the temperature shown could be wrong.\n"
+#~ "WARNING: See --help, --debug and --drivebase options.\n"
+#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
+#~ msgstr ""
+#~ "ATTENTION : Le lecteur %s n'apparait pas dans la base de données des "
+#~ "lecteurs supportés\n"
+#~ "ATTENTION : Mais en utilisant une valeur courante, il renvoie quelque "
+#~ "chose.\n"
+#~ "ATTENTION : Notez que la température renvoyée peut être erronée.\n"
+#~ "ATTENTION : Voir les options --help, --debug et --drivebase.\n"
+#~ "ATTENTION : Et n'oubliez pas d'ajouter votre lecteur au fichier hddtemp."
+#~ "db\n"
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "champ(%d)\t = %d\n"
--- hddtemp-0.3-beta15.orig/po/sv.po
+++ hddtemp-0.3-beta15/po/sv.po
@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: hddtemp 0.3-beta14-4\n"
-"Report-Msgid-Bugs-To: hddtemp@guzu.net\n"
-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-06-29 16:24+0200\n"
 "PO-Revision-Date: 2005-11-02 19:03+0100\n"
 "Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
 "Language-Team: Swedish <sv@li.org>\n"
@@ -17,23 +17,7 @@
 "X-Poedit-Language: swe\n"
 "X-Poedit-Country: swe\n"
 
-#: src/hddtemp.c:112
-#, c-format
-msgid ""
-"\n"
-"Regexp%s| Value | Description\n"
-"------%s---------------------\n"
-msgstr ""
-"\n"
-"Regexp%s| Värde | Beskrivning\n"
-"------%s---------------------\n"
-
-#: src/hddtemp.c:118
-#, c-format
-msgid "%s%s| %5d | %s\n"
-msgstr "%s%s| %5d | %s\n"
-
-#: src/hddtemp.c:161
+#: src/hddtemp.c:156
 #, c-format
 msgid ""
 "\n"
@@ -46,7 +30,7 @@
 "Modell: %s\n"
 "\n"
 
-#: src/hddtemp.c:188
+#: src/hddtemp.c:189
 #, c-format
 msgid ""
 "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
@@ -60,76 +44,63 @@
 "net).\n"
 "VARNING: Se --help, --debug och --drivebase flaggorna.\n"
 
-#: src/hddtemp.c:192
+#: src/hddtemp.c:197
 #, c-format
 msgid "%s: %s:  no sensor\n"
 msgstr "%s: %s:  ingen sensor\n"
 
-#: src/hddtemp.c:197
-#, c-format
-msgid ""
-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
-"WARNING: But using a common value, it reports something.\n"
-"WARNING: Note that the temperature shown could be wrong.\n"
-"WARNING: See --help, --debug and --drivebase options.\n"
-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
-msgstr ""
-"VARNING: Disken %s verkar inte finnas i databasen över diskar som stöds\n"
-"VARNING: Men använder man ett vanligt värde rapporterar den något.\n"
-"VARNING: Notera att temperaturen som visas kan vara felaktig.\n"
-"VARNING: Se --help, --debug och --drivebase flaggorna.\n"
-"VARNING: Och glöm inte att du kan lägga till din disk till hddtemp.db\n"
-
-#: src/hddtemp.c:202
+#: src/hddtemp.c:211
 #, c-format
 msgid "%s: %s:  %d%sC or %sF\n"
 msgstr "%s: %s:  %d%sC eller %sF\n"
 
-#: src/hddtemp.c:214
+#: src/hddtemp.c:235
 #, c-format
 msgid "%s: %s: drive is sleeping\n"
 msgstr "%s: %s: disken sover\n"
 
-#: src/hddtemp.c:217
-#, c-format
-msgid "%s: %s:  known drive, but it doesn't have a temperature sensor.\n"
+#: src/hddtemp.c:242
+#, fuzzy, c-format
+msgid "%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"
 msgstr "%s: %s:  känd disk men den har ingen temperatursensor.\n"
 
-#: src/hddtemp.c:220
+#: src/hddtemp.c:246
 #, c-format
 msgid "ERROR: %s: %s: unknown returned status\n"
 msgstr "FEL: %s: %s: okänd returnerad status\n"
 
-#: src/hddtemp.c:235
-#, c-format
+#: src/hddtemp.c:261
+#, fuzzy, c-format
 msgid ""
 "\n"
 "If one of the field value seems to match the temperature, be sure to read\n"
-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
+"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
 msgstr ""
 "\n"
 "Om ett av fältvärdena verkar matcha temperaturen, var säker på att du\n"
 "läst manualsidan för hddtemp före du skickar en rapport till mig (sektionen\n"
 "REPORT). Tack.\n"
 
-#: src/hddtemp.c:308
+#: src/hddtemp.c:338
 #, c-format
 msgid "ERROR: invalid separator.\n"
 msgstr "FEL: ogiltig separator.\n"
 
-#: src/hddtemp.c:319
+#: src/hddtemp.c:349
 #, c-format
 msgid "ERROR: invalid port number.\n"
 msgstr "FEL: ogiltigt portnummer.\n"
 
-#: src/hddtemp.c:329
-#, c-format
+#: src/hddtemp.c:371
+#, fuzzy, c-format
 msgid ""
-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
+" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
 "\n"
 "   hddtemp displays the temperature of drives supplied in argument.\n"
 "   Drives must support S.M.A.R.T.\n"
 "\n"
+"  TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
+"\n"
 "  -b   --drivebase   :  display database file content that allow hddtemp to\n"
 "                        recognize supported drives.\n"
 "  -D   --debug       :  display various S.M.A.R.T. fields and their values.\n"
@@ -139,6 +110,7 @@
 "  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by "
 "default.)\n"
 "  -f   --file=FILE   :  specify database file to use.\n"
+"  -F   --foreground  :  don't daemonize, stay in foreground.\n"
 "  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon "
 "mode).\n"
 "  -n   --numeric     :  print only the temperature.\n"
@@ -146,6 +118,8 @@
 "  -s   --separator=C :  separator to use between fields (in TCP/IP daemon "
 "mode).\n"
 "  -S   --syslog=s    :  log temperature to syslog every s seconds.\n"
+"  -u   --unit=[C|F]  :  force output temperature either in Celius or "
+"Fahrenheit.\n"
 "  -q   --quiet       :  do not check if the drive is supported.\n"
 "  -v   --version     :  display hddtemp version number.\n"
 "  -w   --wake-up     :  wake-up the drive if need.\n"
@@ -184,61 +158,91 @@
 "\n"
 "Rapportera buggar eller nya hårddiskar till <hddtemp@guzu.net>.\n"
 
-#: src/hddtemp.c:522
+#: src/hddtemp.c:402
 #, c-format
 msgid "hddtemp version %s\n"
 msgstr "hddtemp version %s\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:418
 #, c-format
 msgid "ERROR: invalid interval.\n"
 msgstr "FEL: ogiltigt intervall.\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:438
+#, c-format
 msgid "Too few arguments: you must specify one drive, at least.\n"
 msgstr "För få argument: du måste specificera åtminstone en disk.\n"
 
-#: src/hddtemp.c:557
+#: src/hddtemp.c:448
+#, c-format
 msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
 msgstr ""
 "FEL: kan inte använda --debug och --daemon eller --syslog flaggorna "
 "tillsammans.\n"
 
-#: src/hddtemp.c:583
+#: src/hddtemp.c:505
 #, c-format
 msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
 msgstr ""
 "FEL: %s: kan inte fastställa busstyp (eller så är denna busstyp okänd)\n"
 
-#: src/ata.c:66 src/scsi.c:68
+#: src/ata.c:66 src/scsi.c:64
 msgid "unknown"
 msgstr "okänd"
 
-#: src/ata.c:98
+#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
 #, c-format
-msgid "field(%d)\t = %d\n"
-msgstr "fält(%d)\t = %d\n"
-
-#: src/ata.c:167
 msgid "S.M.A.R.T. not available"
 msgstr "S.M.A.R.T. är inte tillgänglig"
 
-#: src/db.c:180
+#: src/db.c:115
+#, c-format
+msgid ""
+"\n"
+"Regexp%s| Value | Description\n"
+"------%s---------------------\n"
+msgstr ""
+"\n"
+"Regexp%s| Värde | Beskrivning\n"
+"------%s---------------------\n"
+
+#: src/db.c:121
+#, c-format
+msgid "%s%s| %5d | %s\n"
+msgstr "%s%s| %5d | %s\n"
+
+#: src/db.c:236
 #, c-format
 msgid "hddtemp: can't open %1$s: %2$s\n"
 msgstr "hddtemp: kan inte öppna %1$s: %2$s\n"
 
-#: src/db.c:194
+#: src/db.c:250
 #, c-format
 msgid "ERROR: syntax error at line %1$d in %2$s\n"
 msgstr "FEL: syntaxfel på rad %1$d i %2$s\n"
 
-#: src/db.c:201
+#: src/db.c:257
 #, c-format
 msgid "  ERROR: line exceed %1$d characters in %2$s.\n"
 msgstr " FEL: raden överstiger %1$d tecken i %2$s.\n"
 
-#: src/scsi.c:112 src/scsi.c:130
+#: src/scsi.c:111 src/scsi.c:129
 #, c-format
 msgid "log sense failed : %s"
 msgstr "igenkänning av logg misslyckades : %s"
+
+#~ msgid ""
+#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
+#~ "WARNING: But using a common value, it reports something.\n"
+#~ "WARNING: Note that the temperature shown could be wrong.\n"
+#~ "WARNING: See --help, --debug and --drivebase options.\n"
+#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
+#~ msgstr ""
+#~ "VARNING: Disken %s verkar inte finnas i databasen över diskar som stöds\n"
+#~ "VARNING: Men använder man ett vanligt värde rapporterar den något.\n"
+#~ "VARNING: Notera att temperaturen som visas kan vara felaktig.\n"
+#~ "VARNING: Se --help, --debug och --drivebase flaggorna.\n"
+#~ "VARNING: Och glöm inte att du kan lägga till din disk till hddtemp.db\n"
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "fält(%d)\t = %d\n"
--- hddtemp-0.3-beta15.orig/po/ru.po
+++ hddtemp-0.3-beta15/po/ru.po
@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: hddtemp 0.3-beta3\n"
-"Report-Msgid-Bugs-To: hddtemp@guzu.net\n"
-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-06-29 16:24+0200\n"
 "PO-Revision-Date: 2003-03-08 16:42+0300\n"
 "Last-Translator: Michael Shigorin <mike@altlinux.ru>\n"
 "Language-Team: Russian <ru@li.org>\n"
@@ -15,23 +15,7 @@
 "Content-Type: text/plain; charset=koi8-r\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: src/hddtemp.c:112
-#, c-format
-msgid ""
-"\n"
-"Regexp%s| Value | Description\n"
-"------%s---------------------\n"
-msgstr ""
-"\n"
-"òÅÇÜËÓ%s| úÎÁÞ. | ïÐÉÓÁÎÉÅ   \n"
-"------%s---------------------\n"
-
-#: src/hddtemp.c:118
-#, c-format
-msgid "%s%s| %5d | %s\n"
-msgstr ""
-
-#: src/hddtemp.c:161
+#: src/hddtemp.c:156
 #, c-format
 msgid ""
 "\n"
@@ -40,7 +24,7 @@
 "\n"
 msgstr ""
 
-#: src/hddtemp.c:188
+#: src/hddtemp.c:189
 #, c-format
 msgid ""
 "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
@@ -53,72 +37,59 @@
 "÷îéíáîéå: åÓÌÉ ×Ù ÔÏÞÎÏ ÚÎÁÅÔÅ, ÞÔÏ ÄÁÔÞÉË ÅÓÔØ, ÎÁÐÉÛÉÔÅ hddtemp@guzu.net\n"
 "÷îéíáîéå: (ÓÍ. ÏÐÃÉÉ --help, --debug É --drivebase).\n"
 
-#: src/hddtemp.c:192
+#: src/hddtemp.c:197
 #, c-format
 msgid "%s: %s:  no sensor\n"
 msgstr "%s: %s:  ÎÅÔ ÄÁÔÞÉËÁ\n"
 
-#: src/hddtemp.c:197
-#, c-format
-msgid ""
-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
-"WARNING: But using a common value, it reports something.\n"
-"WARNING: Note that the temperature shown could be wrong.\n"
-"WARNING: See --help, --debug and --drivebase options.\n"
-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
-msgstr ""
-"÷îéíáîéå: äÉÓË %s ÎÅ ×ËÌÀÞÅÎ × ÂÁÚÕ ÄÁÎÎÙÈ ÐÏÄÄÅÒÖÉ×ÁÅÍÙÈ ÐÒÉ×ÏÄÏ×.\n"
-"÷îéíáîéå: îÏ Ó ÉÓÐÏÌØÚÏ×ÁÎÉÅÍ ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÈ ÐÁÒÁÍÅÔÒÏ× ÏÎ ÞÔÏ-ÔÏ ×ÙÄÁÅÔ.\n"
-"÷îéíáîéå: úÁÍÅÔØÔÅ, ÞÔÏ ÐÏËÁÚÁÎÎÁÑ ÔÅÍÐÅÒÁÔÕÒÁ ÍÏÖÅÔ ÔÁËÏ×ÏÊ ÎÅ Ñ×ÌÑÔØÓÑ.\n"
-"÷îéíáîéå: óÍ. ÏÐÃÉÉ --help, --debug É --drivebase.\n"
-"÷îéíáîéå: é ÎÅ ÚÁÂÕÄØÔÅ, ÞÔÏ ÍÏÖÎÏ ÄÏÂÁ×ÉÔØ ÐÒÉ×ÏÄ × hddtemp.db\n"
-
-#: src/hddtemp.c:202
+#: src/hddtemp.c:211
 #, c-format
 msgid "%s: %s:  %d%sC or %sF\n"
 msgstr "%s: %s:  %d%sC ÉÌÉ %sF\n"
 
-#: src/hddtemp.c:214
+#: src/hddtemp.c:235
 #, c-format
 msgid "%s: %s: drive is sleeping\n"
 msgstr "%s: %s:  ÎÅÔ ÄÁÔÞÉËÁ\n"
 
-#: src/hddtemp.c:217
-#, c-format
-msgid "%s: %s:  known drive, but it doesn't have a temperature sensor.\n"
+#: src/hddtemp.c:242
+#, fuzzy, c-format
+msgid "%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"
 msgstr "%s: %s:  ÉÚ×ÅÓÔÎÙÊ ÄÉÓË, ÎÅ ÓÏÄÅÒÖÁÝÉÊ ÄÁÔÞÉËÁ ÔÅÍÐÅÒÁÔÕÒÙ.\n"
 
-#: src/hddtemp.c:220
+#: src/hddtemp.c:246
 #, c-format
 msgid "ERROR: %s: %s: unknown returned status\n"
 msgstr "ïûéâëá: %s: %s: ÎÅÉÚ×ÅÓÔÎÙÊ ÓÔÁÔÕÓ ×ÏÚ×ÒÁÔÁ\n"
 
-#: src/hddtemp.c:235
+#: src/hddtemp.c:261
 #, c-format
 msgid ""
 "\n"
 "If one of the field value seems to match the temperature, be sure to read\n"
-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
+"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
 msgstr ""
 
-#: src/hddtemp.c:308
+#: src/hddtemp.c:338
 #, c-format
 msgid "ERROR: invalid separator.\n"
 msgstr "ïûéâëá: ÎÅ×ÅÒÎÙÊ ÒÁÚÄÅÌÉÔÅÌØ.\n"
 
-#: src/hddtemp.c:319
+#: src/hddtemp.c:349
 #, c-format
 msgid "ERROR: invalid port number.\n"
 msgstr "ïýéâëá: ÎÅ×ÅÒÎÙÊ ÎÏÍÅÒ ÐÏÒÔÁ.\n"
 
-#: src/hddtemp.c:329
+#: src/hddtemp.c:371
 #, fuzzy, c-format
 msgid ""
-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
+" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
 "\n"
 "   hddtemp displays the temperature of drives supplied in argument.\n"
 "   Drives must support S.M.A.R.T.\n"
 "\n"
+"  TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
+"\n"
 "  -b   --drivebase   :  display database file content that allow hddtemp to\n"
 "                        recognize supported drives.\n"
 "  -D   --debug       :  display various S.M.A.R.T. fields and their values.\n"
@@ -128,6 +99,7 @@
 "  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by "
 "default.)\n"
 "  -f   --file=FILE   :  specify database file to use.\n"
+"  -F   --foreground  :  don't daemonize, stay in foreground.\n"
 "  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon "
 "mode).\n"
 "  -n   --numeric     :  print only the temperature.\n"
@@ -135,6 +107,8 @@
 "  -s   --separator=C :  separator to use between fields (in TCP/IP daemon "
 "mode).\n"
 "  -S   --syslog=s    :  log temperature to syslog every s seconds.\n"
+"  -u   --unit=[C|F]  :  force output temperature either in Celius or "
+"Fahrenheit.\n"
 "  -q   --quiet       :  do not check if the drive is supported.\n"
 "  -v   --version     :  display hddtemp version number.\n"
 "  -w   --wake-up     :  wake-up the drive if need.\n"
@@ -168,59 +142,90 @@
 "\n"
 "óÏÏÂÝÅÎÉÑ ÏÂ ÏÛÉÂËÁÈ É ÄÁÎÎÙÅ ÄÌÑ ÄÉÓËÏ× ÏÔÐÒÁ×ÌÑÊÔÅ ÎÁ <hddtemp@guzu.net>.\n"
 
-#: src/hddtemp.c:522
+#: src/hddtemp.c:402
 #, c-format
 msgid "hddtemp version %s\n"
 msgstr "÷ÅÒÓÉÑ hddtemp: %s\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:418
 #, fuzzy, c-format
 msgid "ERROR: invalid interval.\n"
 msgstr "ïûéâëá: ÎÅ×ÅÒÎÙÊ ÒÁÚÄÅÌÉÔÅÌØ.\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:438
+#, c-format
 msgid "Too few arguments: you must specify one drive, at least.\n"
 msgstr ""
 
-#: src/hddtemp.c:557
-#, fuzzy
+#: src/hddtemp.c:448
+#, fuzzy, c-format
 msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
 msgstr "ïûéâëá: ÏÄÎÏ×ÒÅÍÅÎÎÏÅ ÉÓÐÏÌØÚÏ×ÁÎÉÅ --debug É --daemon ÎÅÄÏÐÕÓÔÉÍÏ.\n"
 
-#: src/hddtemp.c:583
+#: src/hddtemp.c:505
 #, c-format
 msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
 msgstr "ïûéâëá: %s: ÎÅ×ÏÚÍÏÖÎÏ ÏÐÒÅÄÅÌÉÔØ ÔÉÐ ÛÉÎÙ\n"
 
-#: src/ata.c:66 src/scsi.c:68
+#: src/ata.c:66 src/scsi.c:64
 msgid "unknown"
 msgstr "ÎÅÉÚ×."
 
-#: src/ata.c:98
+#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
 #, c-format
-msgid "field(%d)\t = %d\n"
-msgstr "ÐÏÌÅ(%d)\t = %d\n"
-
-#: src/ata.c:167
 msgid "S.M.A.R.T. not available"
 msgstr "S.M.A.R.T. ÎÅÄÏÓÔÕÐÅÎ"
 
-#: src/db.c:180
+#: src/db.c:115
+#, c-format
+msgid ""
+"\n"
+"Regexp%s| Value | Description\n"
+"------%s---------------------\n"
+msgstr ""
+"\n"
+"òÅÇÜËÓ%s| úÎÁÞ. | ïÐÉÓÁÎÉÅ   \n"
+"------%s---------------------\n"
+
+#: src/db.c:121
+#, c-format
+msgid "%s%s| %5d | %s\n"
+msgstr ""
+
+#: src/db.c:236
 #, c-format
 msgid "hddtemp: can't open %1$s: %2$s\n"
 msgstr "hddtemp: ÎÅ ÍÏÇÕ ÏÔËÒÙÔØ %1$s: %2$s\n"
 
-#: src/db.c:194
+#: src/db.c:250
 #, c-format
 msgid "ERROR: syntax error at line %1$d in %2$s\n"
 msgstr "óÉÎÔÁËÓÉÞÅÓËÁÑ ïûéâëá × ÓÔÒÏËÅ %1$d ÆÁÊÌÁ %2$s\n"
 
-#: src/db.c:201
+#: src/db.c:257
 #, c-format
 msgid "  ERROR: line exceed %1$d characters in %2$s.\n"
 msgstr "ïûéâëá: ÓÔÒÏËÁ ÄÌÉÎÎÅÅ %1$d ÓÉÍ×ÏÌÏ× × %2$s.\n"
 
-#: src/scsi.c:112 src/scsi.c:130
+#: src/scsi.c:111 src/scsi.c:129
 #, c-format
 msgid "log sense failed : %s"
 msgstr ""
+
+#~ msgid ""
+#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
+#~ "WARNING: But using a common value, it reports something.\n"
+#~ "WARNING: Note that the temperature shown could be wrong.\n"
+#~ "WARNING: See --help, --debug and --drivebase options.\n"
+#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
+#~ msgstr ""
+#~ "÷îéíáîéå: äÉÓË %s ÎÅ ×ËÌÀÞÅÎ × ÂÁÚÕ ÄÁÎÎÙÈ ÐÏÄÄÅÒÖÉ×ÁÅÍÙÈ ÐÒÉ×ÏÄÏ×.\n"
+#~ "÷îéíáîéå: îÏ Ó ÉÓÐÏÌØÚÏ×ÁÎÉÅÍ ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÈ ÐÁÒÁÍÅÔÒÏ× ÏÎ ÞÔÏ-ÔÏ "
+#~ "×ÙÄÁÅÔ.\n"
+#~ "÷îéíáîéå: úÁÍÅÔØÔÅ, ÞÔÏ ÐÏËÁÚÁÎÎÁÑ ÔÅÍÐÅÒÁÔÕÒÁ ÍÏÖÅÔ ÔÁËÏ×ÏÊ ÎÅ "
+#~ "Ñ×ÌÑÔØÓÑ.\n"
+#~ "÷îéíáîéå: óÍ. ÏÐÃÉÉ --help, --debug É --drivebase.\n"
+#~ "÷îéíáîéå: é ÎÅ ÚÁÂÕÄØÔÅ, ÞÔÏ ÍÏÖÎÏ ÄÏÂÁ×ÉÔØ ÐÒÉ×ÏÄ × hddtemp.db\n"
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "ÐÏÌÅ(%d)\t = %d\n"
--- hddtemp-0.3-beta15.orig/po/pt.po
+++ hddtemp-0.3-beta15/po/pt.po
@@ -7,7 +7,7 @@
 msgstr ""
 "Project-Id-Version: hddtemp 0.3-beta14\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2005-02-25 22:43+0100\n"
+"POT-Creation-Date: 2006-06-29 16:24+0200\n"
 "PO-Revision-Date: 2006-03-29 23:22+0000\n"
 "Last-Translator: Miguel Figueiredo <elmig@debianp.org>\n"
 "Language-Team: Portuguese <traduz@debianpt.org>\n"
@@ -15,23 +15,7 @@
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: src/hddtemp.c:112
-#, c-format
-msgid ""
-"\n"
-"Regexp%s| Value | Description\n"
-"------%s---------------------\n"
-msgstr ""
-"\n"
-"Regexp%s| Valor | DescriÃ§Ã£o\n"
-"------%s-------------------\n"
-
-#: src/hddtemp.c:118
-#, c-format
-msgid "%s%s| %5d | %s\n"
-msgstr "%s%s| %5d | %s\n"
-
-#: src/hddtemp.c:161
+#: src/hddtemp.c:156
 #, c-format
 msgid ""
 "\n"
@@ -44,7 +28,7 @@
 "Modelo: %s\n"
 "\n"
 
-#: src/hddtemp.c:188
+#: src/hddtemp.c:189
 #, c-format
 msgid ""
 "WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
@@ -54,79 +38,68 @@
 msgstr ""
 "AVISO: O disco %s nÃ£o parece ter um sensor de temperatura.\n"
 "AVISO: Isto nÃ£o significa que nÃ£o tem nenhum.\n"
-"AVISO: Se tem a certeza que tem um, por favor contacte-me (hddtemp@guzu.net).\n"
+"AVISO: Se tem a certeza que tem um, por favor contacte-me (hddtemp@guzu."
+"net).\n"
 "AVISO: Veja as opÃ§Ãµes --help, --debug e --drivebase.\n"
 
-#: src/hddtemp.c:192
+#: src/hddtemp.c:197
 #, c-format
 msgid "%s: %s:  no sensor\n"
 msgstr "%s: %s: sem sensor\n"
 
-#: src/hddtemp.c:197
-#, c-format
-msgid ""
-"WARNING: Drive %s doesn't appear in the database of supported drives\n"
-"WARNING: But using a common value, it reports something.\n"
-"WARNING: Note that the temperature shown could be wrong.\n"
-"WARNING: See --help, --debug and --drivebase options.\n"
-"WARNING: And don't forget you can add your drive to hddtemp.db\n"
-msgstr ""
-"AVISO: O disco %s nÃ£o parece estar na base de dados de discos suportados\n"
-"AVISO: Mas ao utilizar um valor usual, relata alguma coisa.\n"
-"AVISO: Note que a temperatura mostrada pode estar errada.\n"
-"AVISO: Veja as opÃ§Ãµes --help, --debug e --frivebase.\n"
-"AVISO: E nÃ£o se esqueÃ§a de adicionar o seu disco a hddtemp.db\n"
-
-#: src/hddtemp.c:202
+#: src/hddtemp.c:211
 #, c-format
 msgid "%s: %s:  %d%sC or %sF\n"
 msgstr "%s: %s: %d%sC ou %sF\n"
 
-#: src/hddtemp.c:214
+#: src/hddtemp.c:235
 #, c-format
 msgid "%s: %s: drive is sleeping\n"
 msgstr "%s: %s: o disco estÃ¡ adormecido\n"
 
-#: src/hddtemp.c:217
-#, c-format
-msgid "%s: %s:  known drive, but it doesn't have a temperature sensor.\n"
+#: src/hddtemp.c:242
+#, fuzzy, c-format
+msgid "%s: %s:  drive supported, but it doesn't have a temperature sensor.\n"
 msgstr "%s: %s: disco conhecido, mas nÃ£o tem um sensor de temperatura.\n"
 
-#: src/hddtemp.c:220
+#: src/hddtemp.c:246
 #, c-format
 msgid "ERROR: %s: %s: unknown returned status\n"
 msgstr "ERRO: %s: %s: estado devolvido desconhecido\n"
 
-#: src/hddtemp.c:235
-#, c-format
+#: src/hddtemp.c:261
+#, fuzzy, c-format
 msgid ""
 "\n"
 "If one of the field value seems to match the temperature, be sure to read\n"
-"the hddtemp man page before sending me a report (section REPORT). Thanks.\n"
+"the hddtemp man page before sending a report (section REPORT). Thanks.\n"
 msgstr ""
 "\n"
-"Se um dos campos de valores parecer coincidir com a temperatura, assegure-se\n"
+"Se um dos campos de valores parecer coincidir com a temperatura, assegure-"
+"se\n"
 "que lÃª a pÃ¡gina do manual hddtemp antes de me enviar um relatÃ³rio (secÃ§Ã£o\n"
 "REPORT). Obrigado.\n"
 
-#: src/hddtemp.c:308
+#: src/hddtemp.c:338
 #, c-format
 msgid "ERROR: invalid separator.\n"
 msgstr "ERRO: separador invÃ¡lido.\n"
 
-#: src/hddtemp.c:319
+#: src/hddtemp.c:349
 #, c-format
 msgid "ERROR: invalid port number.\n"
 msgstr "ERRO: nÃºmero de port invÃ¡lido\n"
 
-#: src/hddtemp.c:329
-#, c-format
+#: src/hddtemp.c:371
+#, fuzzy, c-format
 msgid ""
-" Usage: hddtemp [OPTIONS] DISK1 [DISK2]...\n"
+" Usage: hddtemp [OPTIONS] [TYPE:]DISK1 [[TYPE:]DISK2]...\n"
 "\n"
 "   hddtemp displays the temperature of drives supplied in argument.\n"
 "   Drives must support S.M.A.R.T.\n"
 "\n"
+"  TYPE could be SATA, PATA or SCSI. If omitted hddtemp will try to guess.\n"
+"\n"
 "  -b   --drivebase   :  display database file content that allow hddtemp to\n"
 "                        recognize supported drives.\n"
 "  -D   --debug       :  display various S.M.A.R.T. fields and their values.\n"
@@ -136,6 +109,7 @@
 "  -d   --daemon      :  run hddtemp in TCP/IP daemon mode (port %d by "
 "default.)\n"
 "  -f   --file=FILE   :  specify database file to use.\n"
+"  -F   --foreground  :  don't daemonize, stay in foreground.\n"
 "  -l   --listen=addr :  listen on a specific interface (in TCP/IP daemon "
 "mode).\n"
 "  -n   --numeric     :  print only the temperature.\n"
@@ -143,6 +117,8 @@
 "  -s   --separator=C :  separator to use between fields (in TCP/IP daemon "
 "mode).\n"
 "  -S   --syslog=s    :  log temperature to syslog every s seconds.\n"
+"  -u   --unit=[C|F]  :  force output temperature either in Celius or "
+"Fahrenheit.\n"
 "  -q   --quiet       :  do not check if the drive is supported.\n"
 "  -v   --version     :  display hddtemp version number.\n"
 "  -w   --wake-up     :  wake-up the drive if need.\n"
@@ -156,19 +132,23 @@
 "   hddtemp mostra a temperatura dos discos indicados no argumento.\n"
 "   Os discos tÃªm de suportar S.M.A.R.T.\n"
 "\n"
-"  -b	 --drivebase   :  mostrar o conteÃºdo do ficheiro de base de dados que\n"
+"  -b\t --drivebase   :  mostrar o conteÃºdo do ficheiro de base de dados que\n"
 "                        permite ao hddtemp reconhecer os discos suportados.\n"
-"  -D	 --debug       :  mostrar vÃ¡rios campos S.M.A.R.T. e os seus valores.\n"
-"                        Ãštil para encontrar um valor que pareÃ§a coincidir com "
-"                        a temperatura e/ou para me enviar um relatÃ³rio.\n"
+"  -D\t --debug       :  mostrar vÃ¡rios campos S.M.A.R.T. e os seus valores.\n"
+"                        Ãštil para encontrar um valor que pareÃ§a coincidir "
+"com                         a temperatura e/ou para me enviar um relatÃ³rio.\n"
 "                        (feito para cada disco indicado).\n"
-"  -d   --daemon      :  correr o hddtemp no modo daemon TCP/IP\n (porto %d por omissÃ£o.)\n"
+"  -d   --daemon      :  correr o hddtemp no modo daemon TCP/IP\n"
+" (porto %d por omissÃ£o.)\n"
 "  -f   --file=FILE   :  especificar o ficheiro de base de dados a utilizar.\n"
-"  -l   --listen=addr :  escutar um interface especÃ­fico (no modo daemon TCP/IP).\n"
+"  -l   --listen=addr :  escutar um interface especÃ­fico (no modo daemon TCP/"
+"IP).\n"
 "  -n   --numeric     :  escrever apenas a temperatura.\n"
 "  -p   --port=#      :  port para escutar (no modo daemon TCP/IP).\n"
-"  -s   --separator=C :  separador a utilizar entre campos (no modo daemon TCP/IP).\n"
-"  -S   --syslog=s    :  registar a temperatura para o syslog a cada s segundos.\n"
+"  -s   --separator=C :  separador a utilizar entre campos (no modo daemon "
+"TCP/IP).\n"
+"  -S   --syslog=s    :  registar a temperatura para o syslog a cada s "
+"segundos.\n"
 "  -q   --quiet       :  nÃ£o verificar se o disco Ã© suportado.\n"
 "  -v   --version     :  mostrar o nÃºmero da versÃ£o do hddtemp.\n"
 "  -w   --wake-up     :  acordar o disco se necessÃ¡rio.\n"
@@ -177,58 +157,93 @@
 "\n"
 "Relatar bugs ou novos discos para <hddtemp@guzu.net>.\n"
 
-#: src/hddtemp.c:522
+#: src/hddtemp.c:402
 #, c-format
 msgid "hddtemp version %s\n"
 msgstr "hddtemp versÃ£o %s\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:418
 #, c-format
 msgid "ERROR: invalid interval.\n"
 msgstr "ERRO: intervalo invÃ¡lido.\n"
 
-#: src/hddtemp.c:547
+#: src/hddtemp.c:438
+#, c-format
 msgid "Too few arguments: you must specify one drive, at least.\n"
-msgstr "NÃºmero de argumentos insuficiente: tem de especificar pelo menos um disco.\n"
+msgstr ""
+"NÃºmero de argumentos insuficiente: tem de especificar pelo menos um disco.\n"
 
-#: src/hddtemp.c:557
+#: src/hddtemp.c:448
+#, c-format
 msgid "ERROR: can't use --debug and --daemon or --syslog options together.\n"
-msgstr "ERRO: nÃ£o pode utilizar em conjunto as opÃ§Ãµes --debug e --daemon ou --syslog.\n"
+msgstr ""
+"ERRO: nÃ£o pode utilizar em conjunto as opÃ§Ãµes --debug e --daemon ou --"
+"syslog.\n"
 
-#: src/hddtemp.c:583
+#: src/hddtemp.c:505
 #, c-format
 msgid "ERROR: %s: can't determine bus type (or this bus type is unknown)\n"
-msgstr "ERRO: %s: nÃ£o Ã© possÃ­vel determinar o tipo do bus (ou este tipo de bus Ã© desconhecido)\n"
+msgstr ""
+"ERRO: %s: nÃ£o Ã© possÃ­vel determinar o tipo do bus (ou este tipo de bus Ã© "
+"desconhecido)\n"
 
-#: src/ata.c:66 src/scsi.c:68
+#: src/ata.c:66 src/scsi.c:64
 msgid "unknown"
 msgstr "desconhecido"
 
-#: src/ata.c:98
+#: src/ata.c:85 src/ata.c:104 src/scsi.c:91
 #, c-format
-msgid "field(%d)\t = %d\n"
-msgstr "campo(%d)\t = %d\n"
-
-#: src/ata.c:167
 msgid "S.M.A.R.T. not available"
 msgstr "S.M.A.R.T. nÃ£o estÃ¡ disponÃ­vel"
 
-#: src/db.c:180
+#: src/db.c:115
+#, c-format
+msgid ""
+"\n"
+"Regexp%s| Value | Description\n"
+"------%s---------------------\n"
+msgstr ""
+"\n"
+"Regexp%s| Valor | DescriÃ§Ã£o\n"
+"------%s-------------------\n"
+
+#: src/db.c:121
+#, c-format
+msgid "%s%s| %5d | %s\n"
+msgstr "%s%s| %5d | %s\n"
+
+#: src/db.c:236
 #, c-format
 msgid "hddtemp: can't open %1$s: %2$s\n"
 msgstr "hddtemp: nÃ£o pode abrir %1$s: %2$s\n"
 
-#: src/db.c:194
+#: src/db.c:250
 #, c-format
 msgid "ERROR: syntax error at line %1$d in %2$s\n"
 msgstr "ERRO: erro de sintaxe na linha %1$d em %2$s\n"
 
-#: src/db.c:201
+#: src/db.c:257
 #, c-format
 msgid "  ERROR: line exceed %1$d characters in %2$s.\n"
 msgstr "  ERRO: a linha execedeu %1$d caracteres em %2$s.\n"
 
-#: src/scsi.c:112 src/scsi.c:130
+#: src/scsi.c:111 src/scsi.c:129
 #, c-format
 msgid "log sense failed : %s"
 msgstr "detecÃ§Ã£o de log falhou: %s"
+
+#~ msgid ""
+#~ "WARNING: Drive %s doesn't appear in the database of supported drives\n"
+#~ "WARNING: But using a common value, it reports something.\n"
+#~ "WARNING: Note that the temperature shown could be wrong.\n"
+#~ "WARNING: See --help, --debug and --drivebase options.\n"
+#~ "WARNING: And don't forget you can add your drive to hddtemp.db\n"
+#~ msgstr ""
+#~ "AVISO: O disco %s nÃ£o parece estar na base de dados de discos suportados\n"
+#~ "AVISO: Mas ao utilizar um valor usual, relata alguma coisa.\n"
+#~ "AVISO: Note que a temperatura mostrada pode estar errada.\n"
+#~ "AVISO: Veja as opÃ§Ãµes --help, --debug e --frivebase.\n"
+#~ "AVISO: E nÃ£o se esqueÃ§a de adicionar o seu disco a hddtemp.db\n"
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "campo(%d)\t = %d\n"
