File glusterfs.spec of Package glusterfs

BuildRequires:        -post-build-checks

%global _hardened_build 1

%global _for_fedora_koji_builds 1

# uncomment and add '%' to use the prereltag for pre-releases
# %%global prereltag beta5

# if you wish to compile an rpm without rdma support, compile like this...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without rdma
%{?_without_rdma:%global _without_rdma --disable-ibverbs}

# No RDMA Support on s390(x)
%ifarch s390 s390x
%global _without_rdma --disable-ibverbs
%endif

# if you wish to compile an rpm without epoll...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without epoll
%{?_without_epoll:%global _without_epoll --disable-epoll}

# if you wish to compile an rpm without fusermount...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without fusermount
%{?_without_fusermount:%global _without_fusermount --disable-fusermount}

# if you wish to compile an rpm without geo-replication support, compile like this...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without georeplication
%{?_without_georeplication:%global _without_georeplication --disable-georeplication}

%if ( 0%{?suse_version} )
%global _without_georeplication --disable-georeplication
%endif

# if you wish to compile an rpm without the OCF resource agents...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without ocf
%{?_without_ocf:%global _without_ocf --without-ocf}

# if you wish to build rpms without syslog logging, compile like this
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@tar.gz --without syslog
%{?_without_syslog:%global _without_syslog --disable-syslog}

# disable syslog forcefully as rhel <= 6 doesn't have rsyslog or rsyslog-mmcount
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
%global _without_syslog --disable-syslog
%endif

# there is no systemtap support! Perhaps some day there will be
%global _without_systemtap --enable-systemtap=no

# if you wish to compile an rpm without the BD map support...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without bd
%{?_without_bd:%global _without_bd --disable-bd-xlator}

%if 0%{?rhel} < 6 || 0%{?sles_version} || 0%{?suse_version}
%define _without_bd --disable-bd-xlator
%endif

# if you wish to compile an rpm without the qemu-block support...
# rpmbuild -ta @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz --without qemu-block
%{?_without_qemu_block:%global _without_qemu_block --disable-qemu-block}

%if ( 0%{?rhel} && 0%{?rhel} < 6 ) || 0%{?sles_version}
# xlators/features/qemu-block fails to build on RHEL5, disable it
%define _without_qemu_block --disable-qemu-block
%endif

%if ( 0%{?fedora} && 0%{?fedora} > 16 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
%global           _with_systemd true
%endif

# From https://fedoraproject.org/wiki/Packaging:Python#Macros
%if ( 0%{?rhel} && 0%{?rhel} <= 5 )
%{!?python_sitelib: %global python_sitelib %(python -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")}
%{!?python_sitearch: %global python_sitearch %(python -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")}
%endif

Summary:          Cluster File System
%if ( 0%{_for_fedora_koji_builds} )
Name:             glusterfs
Version:          3.5.0
Release:          2%{?prereltag:.%{prereltag}}%{?dist}
Vendor:           Fedora Project
%else
Name:             @PACKAGE_NAME@
Version:          @PACKAGE_VERSION@
Release:          1%{?dist}
Vendor:           glusterfs.org
%endif
License:          GPLv2 or LGPLv3+
Group:            System Environment/Base
URL:              http://www.gluster.org/docs/index.php/GlusterFS
%if ( 0%{_for_fedora_koji_builds} )
Source0:           http://bits.gluster.org/pub/gluster/glusterfs/src/glusterfs-%{version}%{?prereltag}.tar.gz
Source1:          glusterd.sysconfig
Source2:          glusterfsd.sysconfig
Source3:          glusterfs-fuse.logrotate
Source4:          glusterd.logrotate
Source5:          glusterfsd.logrotate
Source6:          rhel5-load-fuse-modules
Source11:         glusterfsd.service
Source13:         glusterfsd.init
Source100:        glusterfs-rpmlintrc
%else
Source0:          @PACKAGE_NAME@-@PACKAGE_VERSION@.tar.gz
%endif

BuildRoot:        %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)

%if ( 0%{?rhel} && 0%{?rhel} <= 5 )
BuildRequires:    python-simplejson
%endif
%if ( 0%{?_with_systemd:1} )
%if ( 0%{_for_fedora_koji_builds} )
%global glusterfsd_service %{S:%{SOURCE11}}
%endif
BuildRequires:    systemd-units
Requires(post):   systemd-units
Requires(preun):  systemd-units
Requires(postun): systemd-units
%define _init_enable()  /bin/systemctl enable %1.service || : ;
%define _init_disable() /bin/systemctl disable %1.service || : ;
%define _init_restart() /bin/systemctl try-restart %1.service || : ;
%define _init_stop()    /bin/systemctl stop %1.service || : ;
%define _init_install() install -D -p -m 0644 %1 %{buildroot}%{_unitdir}/%2.service ;
# can't seem to make a generic macro that works
%define _init_glusterd   %{_unitdir}/glusterd.service
%define _init_glusterfsd %{_unitdir}/glusterfsd.service
%else
%if ( 0%{_for_fedora_koji_builds} )
%global glusterfsd_service %{S:%{SOURCE13}}
%endif
Requires(post):   /sbin/chkconfig
Requires(preun):  /sbin/service
Requires(preun):  /sbin/chkconfig
Requires(postun): /sbin/service
%define _init_enable()  /sbin/chkconfig --add %1 || : ;
%define _init_disable() /sbin/chkconfig --del %1 || : ;
%define _init_restart() /sbin/service %1 condrestart &>/dev/null || : ;
%define _init_stop()    /sbin/service %1 stop &>/dev/null || : ;
%define _init_install() install -D -p -m 0755 %1 %{buildroot}%{_sysconfdir}/init.d/%2 ;
# can't seem to make a generic macro that works
%define _init_glusterd   %{_sysconfdir}/init.d/glusterd
%define _init_glusterfsd %{_sysconfdir}/init.d/glusterfsd
%endif

Requires:         %{name}-libs = %{version}-%{release}
BuildRequires:    bison flex
BuildRequires:    gcc make automake libtool
BuildRequires:    ncurses-devel readline-devel
BuildRequires:    libxml2-devel
%if ( ! 0%{?suse_version} )
BuildRequires:    openssl-devel
%else
BuildRequires:    libopenssl-devel
%endif
BuildRequires:    libaio-devel
BuildRequires:    python-devel
BuildRequires:    python-ctypes
BuildRequires:	  pkgconfig
%if ( 0%{!?_without_systemtap:1} )
BuildRequires:    systemtap-sdt-devel
%endif
%if ( 0%{!?_without_bd:1} )
BuildRequires:    lvm2-devel
%endif
%if ( 0%{!?_without_qemu_block:1} )
BuildRequires:    glib2-devel
%endif
%if ( 0%{!?_without_georeplication:1} )
BuildRequires:    libattr-devel
%endif

Obsoletes:        hekafs
Obsoletes:        %{name}-common < %{version}-%{release}
Obsoletes:        %{name}-core < %{version}-%{release}
Provides:         %{name}-common = %{version}-%{release}
Provides:         %{name}-core = %{version}-%{release}
Obsoletes:        %{name}-ufo

# We do not want to generate useless provides and requires for xlator .so files
# Filter all generated:
#
# TODO: RHEL5 does not have a convenient solution
%if ( 0%{?rhel} == 6 )
    # filter_setup exists in RHEL6 only
    %filter_provides_in %{_libdir}/glusterfs/%{version}/
    %global __filter_from_req %{?__filter_from_req} | grep -v -P '^(?!lib).*\.so.*$'
    %filter_setup
%else
    # modern rpm and current Fedora do not generate requires when the
    # provides are filtered
    %global __provides_exclude_from ^%{_libdir}/glusterfs/%{version}/.*$
%endif

%{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{name}-%{version}}

%if ( 0%{?rhel} && 0%{?rhel} < 6 )
   # _sharedstatedir is not provided by RHEL5
   %define _sharedstatedir /var/lib
%endif

%description
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package includes the glusterfs binary, the glusterfsd daemon and the
gluster command line, libglusterfs and glusterfs translator modules common to
both GlusterFS server and client framework.

%package libs
Summary:          GlusterFS common libraries
Group:            Applications/File
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
Requires:         rsyslog-mmjsonparse
%endif
%if ( 0%{?rhel} && 0%{?rhel} == 6 )
Requires:         rsyslog-mmcount
%endif
%endif

%description libs
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the base GlusterFS libraries

%package cli
Summary:          GlusterFS CLI
Group:            Applications/File
Requires:         %{name}-libs = %{version}-%{release}

%description cli
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the GlusterFS CLI application and its man page

%if ( 0%{!?_without_rdma:1} )
%package rdma
Summary:          GlusterFS rdma support for ib-verbs
Group:            Applications/File
BuildRequires:    libibverbs-devel
BuildRequires:    librdmacm-devel
Requires:         %{name} = %{version}-%{release}

%description rdma
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides support to ib-verbs library.
%endif

%if ( 0%{!?_without_georeplication:1} )
%package geo-replication
Summary:          GlusterFS Geo-replication
Group:            Applications/File
Requires:         %{name} = %{version}-%{release}
Requires:         %{name}-server = %{version}-%{release}
Requires:         python python-ctypes

%description geo-replication
GlusterFS is a clustered file-system capable of scaling to several
peta-bytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file system in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in userspace and easily manageable.

This package provides support to geo-replication.
%endif

%package fuse
Summary:          Fuse client
Group:            Applications/File
BuildRequires:    fuse-devel

Requires:         %{name} = %{version}-%{release}

Obsoletes:        %{name}-client < %{version}-%{release}
Provides:         %{name}-client = %{version}-%{release}

%description fuse
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides support to FUSE based clients.

%package server
Summary:          Clustered file-system server
Group:            System Environment/Daemons
Requires:         %{name} = %{version}-%{release}
Requires:         %{name}-cli = %{version}-%{release}
Requires:         %{name}-libs = %{version}-%{release}
Requires:         %{name}-fuse = %{version}-%{release}
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
Requires:         rpcbind
%else
Requires:         portmap
%endif

%description server
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs server daemon.

%package api
Summary:          Clustered file-system api library
Group:            System Environment/Daemons
Requires:         %{name} = %{version}-%{release}
# we provide the Python package/namespace 'gluster'
Provides:         python-gluster = %{version}-%{release}

%description api
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs libgfapi library.

%package extra-xlators
Summary:          Extra Gluster filesystem Translators
Group:            Applications/File
# We need -api rpm for its __init__.py in Python site-packages area
Requires:         %{name}-api = %{version}-%{release}
Requires:         python python-ctypes

%description extra-xlators
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides extra filesystem Translators, such as Glupy,
for GlusterFS.

%if ( 0%{!?_without_ocf:1} )
%package resource-agents
Summary:          OCF Resource Agents for GlusterFS
License:          GPLv3+
%if ( ! ( 0%{?rhel} && 0%{?rhel} < 6 || 0%{?sles_version} ) )
# EL5 does not support noarch sub-packages
BuildArch:        noarch
%endif
# this Group handling comes from the Fedora resource-agents package
%if ( 0%{?fedora} || 0%{?centos_version} || 0%{?rhel} )
Group:            System Environment/Base
%else
Group:            Productivity/Clustering/HA
%endif
# for glusterd
Requires:         glusterfs-server
# depending on the distribution, we need pacemaker or resource-agents
%if 0%{?suse_version}
Requires:	resource-agents
%else
Requires:         %{_prefix}/lib/ocf/resource.d
%endif

%description resource-agents
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the resource agents which plug glusterd into
Open Cluster Framework (OCF) compliant cluster resource managers,
like Pacemaker.
%endif

%package devel
Summary:          Development Libraries
Group:            Development/Libraries
Requires:         %{name} = %{version}-%{release}
# Needed for the Glupy examples to work
Requires:         %{name}-extra-xlators = %{version}-%{release}

%description devel
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the development libraries and include files.

%package api-devel
Summary:          Development Libraries
Group:            Development/Libraries
Requires:         %{name} = %{version}-%{release}
Requires:         %{name}-devel = %{version}-%{release}

%description api-devel
GlusterFS is a clustered file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the api include files.

%package regression-tests
Summary:          Development Tools
Group:            Development/Tools
Requires:         %{name} = %{version}-%{release}
Requires:         %{name}-fuse = %{version}-%{release}
Requires:         %{name}-server = %{version}-%{release}
Requires:         perl(App::Prove) perl(Test::Harness) gcc util-linux-ng lvm2
Requires:         python attr dbench git nfs-utils xfsprogs

%description regression-tests
The Gluster Test Framework, is a suite of scripts used for
regression testing of Gluster.

%prep
%setup -q -n %{name}-%{version}%{?prereltag}

%build
./autogen.sh
%configure \
        %{?_without_rdma} \
        %{?_without_epoll} \
        %{?_without_fusermount} \
        %{?_without_georeplication} \
        %{?_without_ocf} \
        %{?_without_syslog} \
        %{?_without_bd} \
        %{?_without_qemu_block} \
        %{?_without_systemtap}

# fix hardening and remove rpath in shlibs
%if ( 0%{?fedora} && 0%{?fedora} > 17 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
sed -i 's| \\\$compiler_flags |&\\\$LDFLAGS |' libtool
%endif
sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|' libtool
sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|' libtool

make %{?_smp_mflags}

# Build Glupy
pushd xlators/features/glupy/src
FLAGS="$RPM_OPT_FLAGS" python setup.py build
popd

# Build the Python libgfapi examples
pushd api/examples
FLAGS="$RPM_OPT_FLAGS" python setup.py build
popd

%install
rm -rf %{buildroot}
make install DESTDIR=%{buildroot}
# install the Glupy Python library in /usr/lib/python*/site-packages
pushd xlators/features/glupy/src
python setup.py install --skip-build --verbose --root %{buildroot} --prefix %{_prefix}
popd
# install the gfapi Python library in /usr/lib/python*/site-packages
pushd api/examples
python setup.py install --skip-build --verbose --root %{buildroot} --prefix %{_prefix}
popd
# Install include directory
mkdir -p %{buildroot}%{_includedir}/glusterfs
install -p -m 0644 libglusterfs/src/*.h \
    %{buildroot}%{_includedir}/glusterfs/
install -p -m 0644 contrib/uuid/*.h \
    %{buildroot}%{_includedir}/glusterfs/
# Following needed by hekafs multi-tenant translator
mkdir -p %{buildroot}%{_includedir}/glusterfs/rpc
install -p -m 0644 rpc/rpc-lib/src/*.h \
    %{buildroot}%{_includedir}/glusterfs/rpc/
install -p -m 0644 rpc/xdr/src/*.h \
    %{buildroot}%{_includedir}/glusterfs/rpc/
mkdir -p %{buildroot}%{_includedir}/glusterfs/server
install -p -m 0644 xlators/protocol/server/src/*.h \
    %{buildroot}%{_includedir}/glusterfs/server/
%if ( 0%{_for_fedora_koji_builds} )
install -D -p -m 0644 %{SOURCE1} \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterd
install -D -p -m 0644 %{SOURCE2} \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterfsd
%else
install -D -p -m 0644 extras/glusterd-sysconfig \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterd
%endif

%if ( 0%{_for_fedora_koji_builds} )
%if ( 0%{?rhel} && 0%{?rhel} <= 5 )
install -D -p -m 0755 %{SOURCE6} \
    %{buildroot}%{_sysconfdir}/sysconfig/modules/glusterfs-fuse.modules
%endif
%endif

mkdir -p %{buildroot}%{_localstatedir}/log/glusterd
mkdir -p %{buildroot}%{_localstatedir}/log/glusterfs
mkdir -p %{buildroot}%{_localstatedir}/log/glusterfsd
mkdir -p %{buildroot}%{_localstatedir}/run/gluster

# Remove unwanted files from all the shared libraries
find %{buildroot}%{_libdir} -name '*.a' -delete
find %{buildroot}%{_libdir} -name '*.la' -delete

# Remove installed docs, the ones we want are included by %%doc, in
# /usr/share/doc/glusterfs or /usr/share/doc/glusterfs-x.y.z depending
# on the distribution
%if ( 0%{?fedora} && 0%{?fedora} > 19 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
rm -rf %{buildroot}%{_pkgdocdir}/*
%else
rm -rf %{buildroot}%{_defaultdocdir}/%{name}
mkdir -p %{buildroot}%{_pkgdocdir}
%endif
head -50 ChangeLog > ChangeLog.head && mv ChangeLog.head ChangeLog
cat << EOM >> ChangeLog

More commit messages for this ChangeLog can be found at
https://forge.gluster.org/glusterfs-core/glusterfs/commits/v%{version}%{?prereltag}
EOM

# Remove benchmarking and other unpackaged files
%if ( 0%{?rhel} && 0%{?rhel} < 6 )
rm -rf %{buildroot}/benchmarking
rm -f %{buildroot}/glusterfs-mode.el
rm -f %{buildroot}/glusterfs.vim
%else
%if ( ! ( 0%{?suse_version} ) )
# make install always puts these in %%{_defaultdocdir}/%%{name} so don't
# use %%{_pkgdocdir}; that will be wrong on later Fedora distributions
rm -rf %{buildroot}%{_defaultdocdir}/%{name}/benchmarking
rm -f %{buildroot}%{_defaultdocdir}/%{name}/glusterfs-mode.el
rm -f %{buildroot}%{_defaultdocdir}/%{name}/glusterfs.vim
%else
rm -rf %{buildroot}/usr/share/doc/%{name}/benchmarking
rm -f %{buildroot}/usr/share/doc/%{name}/glusterfs-mode.el
rm -f %{buildroot}/usr/share/doc/%{name}/glusterfs.vim
%endif
%endif

# Create working directory
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd

# Update configuration file to /var/lib working directory
sed -i 's|option working-directory /etc/glusterd|option working-directory %{_sharedstatedir}/glusterd|g' \
    %{buildroot}%{_sysconfdir}/glusterfs/glusterd.vol

# Install glusterfsd .service or init.d file
%if ( 0%{_for_fedora_koji_builds} )
%_init_install %{glusterfsd_service} glusterfsd
%endif

%if ( 0%{_for_fedora_koji_builds} )
# Client logrotate entry
install -D -p -m 0644 %{SOURCE3} \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs-fuse

# Server logrotate entry
install -D -p -m 0644 %{SOURCE4} \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterd
# Legacy server logrotate entry
install -D -p -m 0644 %{SOURCE5} \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfsd
%else
install -D -p -m 0644 extras/glusterfs-logrotate \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs
%endif

%if ( 0%{!?_without_georeplication:1} )
# geo-rep ghosts
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/geo-replication
touch %{buildroot}%{_sharedstatedir}/glusterd/geo-replication/gsyncd_template.conf
install -D -p -m 0644 extras/glusterfs-georep-logrotate \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs-georep
%endif

%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
install -D -p -m 0644 extras/gluster-rsyslog-7.2.conf \
    %{buildroot}%{_sysconfdir}/rsyslog.d/gluster.conf.example
%endif

%if ( 0%{?rhel} && 0%{?rhel} == 6 )
install -D -p -m 0644 extras/gluster-rsyslog-5.8.conf \
    %{buildroot}%{_sysconfdir}/rsyslog.d/gluster.conf.example
%endif

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
install -D -p -m 0644 extras/logger.conf.example \
    %{buildroot}%{_sysconfdir}/glusterfs/logger.conf.example
%endif
%endif

# the rest of the ghosts
touch %{buildroot}%{_sharedstatedir}/glusterd/glusterd.info
touch %{buildroot}%{_sharedstatedir}/glusterd/options
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/stop
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/stop/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/stop/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/start
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/start/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/start/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/remove-brick
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/remove-brick/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/remove-brick/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/add-brick
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/add-brick/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/add-brick/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/set
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/set/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/set/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/create
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/create/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/create/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/delete
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/delete/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/delete/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/copy-file
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/copy-file/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/copy-file/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/gsync-create
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/gsync-create/post
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/gsync-create/pre
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/glustershd
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/peers
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/vols
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/groups
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/nfs/run
touch %{buildroot}%{_sharedstatedir}/glusterd/nfs/nfs-server.vol
touch %{buildroot}%{_sharedstatedir}/glusterd/nfs/run/nfs.pid

%if ( 0%{!?_without_georeplication:1} )
install -p -m 0744 extras/hook-scripts/S56glusterd-geo-rep-create-post.sh \
    %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/gsync-create/post
%endif

find ./tests ./run-tests.sh -type f | cpio -pd %{buildroot}%{_prefix}/share/glusterfs

%clean
rm -rf %{buildroot}

%post
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%_init_restart rsyslog
%endif
%endif

%postun
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%_init_restart rsyslog
%endif
%endif

%files
%defattr(-,root,root)
%doc ChangeLog COPYING-GPLV2 COPYING-LGPLV3 INSTALL README THANKS
%config(noreplace) %{_sysconfdir}/logrotate.d/*
%config(noreplace) %{_sysconfdir}/sysconfig/*
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%{_sysconfdir}/rsyslog.d/gluster.conf.example
%endif
%endif
%{_libdir}/glusterfs
%{_sbindir}/glusterfs*
%{_mandir}/man8/*gluster*.8*
%exclude %{_mandir}/man8/gluster.8*
%dir %{_localstatedir}/log/glusterfs
%dir %{_localstatedir}/run/gluster
%dir %{_sharedstatedir}
%dir %{_sharedstatedir}/glusterd
%if ( 0%{!?_without_rdma:1} )
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/rdma*
%endif
# server-side, etc., xlators in other RPMs
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/api*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/fuse*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/storage*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/posix*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol/server*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mgmt*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/nfs*
# Glupy files are in the -extra-xlators package
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/glupy*
# sample xlators not generally used or usable
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/encryption/rot-13*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/mac-compat*
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/testing/performance/symlink-cache*
%{_datadir}/glusterfs/scripts/post-upgrade-script-for-quota.sh
%{_datadir}/glusterfs/scripts/pre-upgrade-script-for-quota.sh

%post libs -p /sbin/ldconfig

%postun libs -p /sbin/ldconfig

%files libs
%defattr(-,root,root,-)
%{_libdir}/*.so.*
%exclude %{_libdir}/libgfapi.*

%files cli
%defattr(-,root,root,-)
%{_sbindir}/gluster
%{_mandir}/man8/gluster.8*

%if ( 0%{!?_without_rdma:1} )
%files rdma
%defattr(-,root,root)
%{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/rdma*
%endif

%if ( 0%{!?_without_georeplication:1} )
%post geo-replication
#restart glusterd.
if [ $1 -ge 1 ]; then
    %_init_restart glusterd || :
fi

%files geo-replication
%defattr(-,root,root)
%{_sysconfdir}/logrotate.d/glusterfs-georep
%{_libexecdir}/glusterfs/gsyncd
%{_libexecdir}/glusterfs/python/syncdaemon/*
%{_libexecdir}/glusterfs/gverify.sh
%{_libexecdir}/glusterfs/peer_add_secret_pub
%{_libexecdir}/glusterfs/peer_gsec_create
%dir %{_sharedstatedir}
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/geo-replication
%dir %{_sharedstatedir}/glusterd/hooks
%dir %{_sharedstatedir}/glusterd/hooks/1
%dir %{_sharedstatedir}/glusterd/hooks/1/gsync-create
%dir %{_sharedstatedir}/glusterd/hooks/1/gsync-create/post
%{_sharedstatedir}/glusterd/hooks/1/gsync-create/post/S56glusterd-geo-rep-create-post.sh
%{_datadir}/glusterfs/scripts/get-gfid.sh
%{_datadir}/glusterfs/scripts/slave-upgrade.sh
%{_datadir}/glusterfs/scripts/gsync-upgrade.sh
%{_datadir}/glusterfs/scripts/generate-gfid-file.sh
%{_datadir}/glusterfs/scripts/gsync-sync-gfid
%ghost %attr(0644,-,-) %{_sharedstatedir}/glusterd/geo-replication/gsyncd_template.conf
%endif

%files fuse
%defattr(-,root,root)
%if ( 0%{_for_fedora_koji_builds} )
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterfs-fuse
%endif
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/fuse*
/sbin/mount.glusterfs
%if ( 0%{!?_without_fusermount:1} )
%{_bindir}/fusermount-glusterfs
%endif
%if ( 0%{_for_fedora_koji_builds} )
%if ( 0%{?rhel} && 0%{?rhel} <= 5 )
%{_sysconfdir}/sysconfig/modules/glusterfs-fuse.modules
%endif
%endif

%files server
%defattr(-,root,root)
%doc extras/clear_xattrs.sh
%if ( 0%{_for_fedora_koji_builds} )
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterd
%endif
%config(noreplace) %{_sysconfdir}/sysconfig/glusterd
%config(noreplace) %{_sysconfdir}/glusterfs
# %%dir %{_sharedstatedir}/glusterd/groups
# %%config(noreplace) %{_sharedstatedir}/glusterd/groups/virt
# Legacy configs
%if ( 0%{_for_fedora_koji_builds} )
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterfsd
%config(noreplace) %{_sysconfdir}/sysconfig/glusterfsd
%endif
# init files
%_init_glusterd
%if ( 0%{_for_fedora_koji_builds} )
%_init_glusterfsd
%endif
# binaries
%{_sbindir}/glusterd
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/storage*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/posix*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol/server*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mgmt*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/nfs*
# hack to work around old rpm/rpmbuild %%doc misfeature
%ghost %attr(0644,root,root) %config(noreplace) %{_sharedstatedir}/glusterd/glusterd.info
%ghost %attr(0600,root,root) %{_sharedstatedir}/glusterd/options
# This is really ugly, but I have no idea how to mark these directories in
# any other way. They should belong to the glusterfs-server package, but 
# don't exist after installation. They are generated on the first start...
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/stop
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/stop/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/stop/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/start
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/start/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/start/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/remove-brick
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/remove-brick/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/remove-brick/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/add-brick
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/add-brick/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/set
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/set/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/set/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/create
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/create/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/create/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/delete
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/delete/post
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/hooks/1/delete/pre
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/glustershd
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/vols
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/peers
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/groups
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/nfs
%ghost      %attr(0600,root,root) %{_sharedstatedir}/glusterd/nfs/nfs-server.vol
%ghost %dir %attr(0755,root,root) %{_sharedstatedir}/glusterd/nfs/run
%ghost      %attr(0600,root,root) %{_sharedstatedir}/glusterd/nfs/run/nfs.pid

%post api -p /sbin/ldconfig

%postun api -p /sbin/ldconfig

%files api
%defattr(-,root,root,-)
%exclude %{_libdir}/*.so
# Shared Python-GlusterFS files
%{python_sitelib}/gluster/__init__.*
# libgfapi files
%{_libdir}/libgfapi.*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/api*
%{python_sitelib}/gluster/gfapi.*
# Don't expect a .egg-info file on EL5
%if ( ! ( 0%{?rhel} && 0%{?rhel} < 6 ) )
%{python_sitelib}/glusterfs_api*.egg-info
%endif

%files extra-xlators
%defattr(-,root,root)
# Glupy C shared library
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/glupy.so
# Glupy Python files
%{python_sitelib}/gluster/glupy.*
# Don't expect a .egg-info file on EL5
%if ( ! ( 0%{?rhel} && 0%{?rhel} < 6 ) )
%{python_sitelib}/glusterfs_glupy*.egg-info
%endif

%if ( 0%{!?_without_ocf:1} )
%files resource-agents
%defattr(-,root,root)
# /usr/lib is the standard for OCF, also on x86_64
%dir %{_prefix}/lib/ocf
%dir %{_prefix}/lib/ocf/resource.d
%{_prefix}/lib/ocf/resource.d/glusterfs
%endif

%files devel
%defattr(-,root,root)
%{_includedir}/glusterfs
%exclude %{_includedir}/glusterfs/y.tab.h
%exclude %{_includedir}/glusterfs/api
%exclude %{_libdir}/libgfapi.so
%{_libdir}/*.so
# Glupy Translator examples
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/glupy/debug-trace.*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/glupy/helloworld.*
%{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/glupy/negative.*

%files api-devel
%defattr(-,root,root)
%{_libdir}/pkgconfig/glusterfs-api.pc
%{_libdir}/pkgconfig/libgfchangelog.pc
%{_libdir}/libgfapi.so
%dir %{_includedir}/glusterfs/api
%{_includedir}/glusterfs/api/*

%files regression-tests
%defattr(-,root,root,-)
%{_prefix}/share/glusterfs/*
%exclude %{_prefix}/share/glusterfs/tests/basic/rpm.t

%post server
# Legacy server
%_init_enable glusterd || :
%_init_enable glusterfsd || :

# hack to work around old rpm/rpmbuild %%doc misfeature
%if ( 0%{?rhel} && 0%{?rhel} < 7 )
if [ -d %{_pkgdocdir}.tmp ]; then
    cp -p %{_pkgdocdir}.tmp/* %{_pkgdocdir}/
    rm -rf %{_pkgdocdir}.tmp/*
fi
%endif

# Genuine Fedora (and EPEL) builds never put gluster files in /etc; if
# there are any files in /etc from a prior gluster.org install, move them
# to /var/lib. (N.B. Starting with 3.3.0 all gluster files are in /var/lib
# in gluster.org RPMs.) Be careful to copy them on the off chance that
# /etc and /var/lib are on separate file systems
if [ -d /etc/glusterd -a ! -h %{_sharedstatedir}/glusterd ]; then
    mkdir -p %{_sharedstatedir}/glusterd
    cp -a /etc/glusterd %{_sharedstatedir}/glusterd
    rm -rf /etc/glusterd
    ln -sf %{_sharedstatedir}/glusterd /etc/glusterd
fi

# Rename old volfiles in an RPM-standard way.  These aren't actually
# considered package config files, so %%config doesn't work for them.
if [ -d %{_sharedstatedir}/glusterd/vols ]; then
    for file in $(find %{_sharedstatedir}/glusterd/vols -name '*.vol'); do
        newfile=${file}.rpmsave
        echo "warning: ${file} saved as ${newfile}"
        cp ${file} ${newfile}
    done
fi

# add marker translator
# but first make certain that there are no old libs around to bite us
# BZ 834847
if [ -e /etc/ld.so.conf.d/glusterfs.conf ]; then
    rm -f /etc/ld.so.conf.d/glusterfs.conf
    /sbin/ldconfig
fi
pidof -c -o %PPID -x glusterd &> /dev/null || :
if [ $? -eq 0 ]; then
    kill -9 `pgrep -f gsyncd.py` &> /dev/null || :

killall glusterd &> /dev/null || :
    glusterd --xlator-option *.upgrade=on -N || :
else
    glusterd --xlator-option *.upgrade=on -N || :
fi

%preun server
if [ $1 -eq 0 ]; then
    if [ -f %_init_glusterfsd ]; then
        %_init_stop glusterfsd || :
    fi
    %_init_stop glusterd || :
    if [ -f %_init_glusterfsd ]; then
        %_init_disable glusterfsd || :
    fi
    %_init_disable glusterd || :
fi
if [ $1 -ge 1 ]; then
    if [ -f %_init_glusterfsd ]; then
        %_init_restart glusterfsd || :
    fi
    %_init_restart glusterd || :
fi

%changelog