File use-init-script-redhat-0.9.4.patch of Package libvirt

File use-init-script-redhat-0.9.4.patch of Package libvirt (Revision b7a992afbd4a5edc7a3e578cc0309b20)

Currently displaying revision b7a992afbd4a5edc7a3e578cc0309b20, show latest

Index: libvirt-0.9.2/tools/Makefile.am
===================================================================
--- libvirt-0.9.2.orig/tools/Makefile.am
+++ libvirt-0.9.2/tools/Makefile.am
@@ -131,16 +131,17 @@ uninstall-local: uninstall-init
 
 if LIBVIRT_INIT_SCRIPT_RED_HAT
 install-init: libvirt-guests.init
-	mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d
+	mkdir -p $(DESTDIR)$(sysconfdir)/init.d
 	$(INSTALL_SCRIPT) libvirt-guests.init \
-	  $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests
-	mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig
+	  $(DESTDIR)$(sysconfdir)/init.d/libvirt-guests
+	mkdir -p $(DESTDIR)$(localstatedir)/adm/fillup-templates
 	$(INSTALL_DATA) $(srcdir)/libvirt-guests.sysconf \
-	  $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests
+	  $(DESTDIR)$(localstatedir)/adm/fillup-templates/sysconfig.libvirt-guests
 
 uninstall-init:
-	rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests \
-	  $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests
+	rm -f $(DESTDIR)$(sysconfdir)/init.d/libvirt-guests \
+	  $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests \
+	  $(DESTDIR)$(localstatedir)/adm/fillup-templates/sysconfig.libvirt-guests
 
 BUILT_SOURCES += libvirt-guests.init
 
Index: libvirt-0.9.2/tools/libvirt-guests.init.sh
===================================================================
--- libvirt-0.9.2.orig/tools/libvirt-guests.init.sh
+++ libvirt-0.9.2/tools/libvirt-guests.init.sh
@@ -4,10 +4,10 @@
 #
 ### BEGIN INIT INFO
 # Provides: libvirt-guests
-# Required-Start: libvirtd
-# Required-Stop: libvirtd
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
+# Required-Start: $network $remote_fs libvirtd
+# Required-Stop: $network $remote_fs libvirtd
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 4 6
 # Short-Description: suspend/resume libvirt guests on shutdown/boot
 # Description: This is a script for suspending active libvirt guests
 #              on shutdown and resuming them on next boot
@@ -24,14 +24,13 @@
 #               See http://libvirt.org
 #
 
+. /etc/rc.status
+rc_reset
+
 sysconfdir="@sysconfdir@"
 localstatedir="@localstatedir@"
 libvirtd="@sbindir@"/libvirtd
 
-# Source function library.
-test ! -r "$sysconfdir"/rc.d/init.d/functions ||
-    . "$sysconfdir"/rc.d/init.d/functions
-
 # Source gettext library.
 # Make sure this file is recognized as having translations: _("dummy")
 . "@bindir@"/gettext.sh
@@ -50,12 +49,10 @@ test -f "$sysconfdir"/sysconfig/libvirt-
 LISTFILE="$localstatedir"/lib/libvirt/libvirt-guests
 VAR_SUBSYS_LIBVIRT_GUESTS="$localstatedir"/lock/subsys/libvirt-guests
 
-RETVAL=0
-
 retval() {
     "$@"
     if [ $? -ne 0 ]; then
-        RETVAL=1
+        rc_failed 1
         return 1
     else
         return 0
@@ -77,12 +74,31 @@ run_virsh_c() {
     ( export LC_ALL=C; run_virsh "$@" )
 }
 
+await_daemon_up()
+{
+    uri=$1
+    i=1
+    rets=10
+    run_virsh $uri list > /dev/null 2>&1
+    while [ $? -ne 0 -a $i -lt $rets ]; do
+	sleep 1
+	echo -n .
+	i=$(($i + 1))
+	run_virsh $uri list > /dev/null 2>&1
+    done
+    if [ $i -eq $rets ]; then
+        echo $"libvirt-guests unable to connect to URI: $uri"
+        return 1
+    fi
+    return 0
+}
+
 list_guests() {
     uri=$1
 
     list=$(run_virsh_c "$uri" list)
     if [ $? -ne 0 ]; then
-        RETVAL=1
+        rc_failed 1
         return 1
     fi
 
@@ -90,7 +106,7 @@ list_guests() {
     for id in $(echo "$list" | awk 'NR > 2 {print $1}'); do
         uuid=$(run_virsh_c "$uri" dominfo "$id" | awk '/^UUID:/{print $2}')
         if [ -z "$uuid" ]; then
-            RETVAL=1
+            rc_failed 1
             return 1
         fi
         uuids="$uuids $uuid"
@@ -117,7 +133,7 @@ guest_is_on() {
     guest_running=false
     info=$(run_virsh_c "$uri" dominfo "$uuid")
     if [ $? -ne 0 ]; then
-        RETVAL=1
+        rc_failed 1
         return 1
     fi
 
@@ -159,6 +175,12 @@ start() {
             continue
         fi
 
+	await_daemon_up $uri
+	if [ $? -ne 0 ]; then
+	    echo $"Ignoring guests on $uri URI, can't connect"
+	    continue
+	fi
+
         eval_gettext "Resuming guests on \$uri URI..."; echo
         for guest in $list; do
             name=$(guest_name "$uri" "$guest")
@@ -245,7 +267,7 @@ stop() {
         if [ $SHUTDOWN_TIMEOUT -le 0 ]; then
             gettext "Shutdown action requested but SHUTDOWN_TIMEOUT was not set"
             echo
-            RETVAL=6
+            rc_failed 6
             return
         fi
     fi
@@ -315,14 +337,13 @@ gueststatus() {
 rh_status() {
     if [ -f "$LISTFILE" ]; then
         gettext "stopped, with saved guests"; echo
-        RETVAL=3
+        rc_failed 3
     else
         if [ -f "$VAR_SUBSYS_LIBVIRT_GUESTS" ]; then
             gettext "started"; echo
         else
             gettext "stopped, with no saved guests"; echo
         fi
-        RETVAL=0
     fi
 }
 
@@ -366,4 +387,4 @@ case "$1" in
         usage
         ;;
 esac
-exit $RETVAL
+rc_exit
Index: libvirt-0.9.2/daemon/Makefile.am
===================================================================
--- libvirt-0.9.2.orig/daemon/Makefile.am
+++ libvirt-0.9.2/daemon/Makefile.am
@@ -302,16 +302,12 @@ install-logrotate: $(LOGROTATE_CONFS)
 
 if LIBVIRT_INIT_SCRIPT_RED_HAT
 install-init: libvirtd.init
-	mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d
-	$(INSTALL_SCRIPT) libvirtd.init \
-	  $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
-	mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig
+	mkdir -p $(DESTDIR)$(localstatedir)/adm/fillup-templates
 	$(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \
-	  $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
+	  $(DESTDIR)$(localstatedir)/adm/fillup-templates/sysconfig.libvirtd
 
 uninstall-init:
-	rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd \
-		$(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
+	rm -f $(DESTDIR)$(localstatedir)/adm/fillup-templates/sysconfig.libvirtd
 
 BUILT_SOURCES += libvirtd.init
 
--- libvirt-0.9.4/tools/libvirt-guests.sysconf.orig	2011-07-22 06:10:04.000000000 +0200
+++ libvirt-0.9.4/tools/libvirt-guests.sysconf	2011-08-08 21:04:42.529743039 +0200
@@ -1,18 +1,28 @@
+## Path: System/Virtualization/libvirt
+
+## Type: string
+## Default: default
 # URIs to check for running guests
 # example: URIS='default xen:/// vbox+tcp://host/system lxc:///'
-#URIS=default
+URIS=default
 
+## Type: string
+## Default: start
 # action taken on host boot
 # - start   all guests which were running on shutdown are started on boot
 #           regardless on their autostart settings
 # - ignore  libvirt-guests init script won't start any guest on boot, however,
 #           guests marked as autostart will still be automatically started by
 #           libvirtd
-#ON_BOOT=start
+ON_BOOT=start
 
+## Type: integer
+## Default: 0
 # number of seconds to wait between each guest start
-#START_DELAY=0
+START_DELAY=0
 
+## Type: string
+## Default: suspend
 # action taken on host shutdown
 # - suspend   all running guests are suspended using virsh managedsave
 # - shutdown  all running guests are asked to shutdown. Please be careful with
@@ -21,10 +31,12 @@
 #             which just needs a long time to shutdown. When setting
 #             ON_SHUTDOWN=shutdown, you must also set SHUTDOWN_TIMEOUT to a
 #             value suitable for your guests.
-#ON_SHUTDOWN=suspend
+ON_SHUTDOWN=suspend
 
+## Type: integer
+## Default: 120
 # number of seconds we're willing to wait for a guest to shut down
-#SHUTDOWN_TIMEOUT=0
+SHUTDOWN_TIMEOUT=120
 
 # If non-zero, try to bypass the file system cache when saving and
 # restoring guests, even though this may give slower operation for