File awstats-6.6-smtp_conf.patch of Package awstats

File awstats-6.6-smtp_conf.patch of Package awstats (Revision 2445daa07aea77b75bd381307428ab2f)

Currently displaying revision 2445daa07aea77b75bd381307428ab2f, show latest

--- wwwroot/cgi-bin/awstats.model.conf.smtp
+++ wwwroot/cgi-bin/awstats.model.conf.smtp
@@ -0,0 +1,1503 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+# for vsftpd:
+LogFile="/var/log/mail"
+# for pure-ftpd:
+# /var/log/pureftpd.lo
+
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=M
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat=1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain=""
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="localhost 127.0.0.1 REGEX[myserver\.com$]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=1
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/cache/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/cgi-bin"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/icons/awstats"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=0
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts=""
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=0
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="/var/lib/awstats/lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks="de en es fr nl"
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+#LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+#LoadPlugin="geoip GEOIP_STANDARD /pathto/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+