File radvd.spec of Package radvd - j0ke.net Open Build Service

File radvd.spec of Package radvd (Revision 4)

Currently displaying revision 4, show latest

# $Id: radvd.spec,v 1.23 2008/10/28 16:35:43 psavola Exp $

%if 0%{?suse_version}
%define	initdir /etc/init.d
%else
%define initdir /etc/rc.d/init.d
%endif

%define RADVD_UID 75

Summary:	A Router Advertisement daemon
Name:		radvd
Version:	1.8.3
Release:	1
# The code includes the advertising clause, so it's GPL-incompatible
License:	BSD with advertising
Group:		System Environment/Daemons
URL:		http://www.litech.org/radvd/
Source0:	http://www.litech.org/radvd/dist/%{name}-%{version}.tar.bz2
Patch0:		%{name}-suse.patch

%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
Requires(postun):	chkconfig, /usr/sbin/userdel, initscripts
Requires(preun):	chkconfig, initscripts
Requires(post):	chkconfig
Requires(pre):	/usr/sbin/useradd
%endif

%if 0%{?suse_version} || 0%{?sles_version}
Requires(postun):	/sbin/chkconfig, /usr/sbin/userdel
Requires(preun):	/sbin/chkconfig
Requires(pre):		/usr/sbin/useradd
%endif

BuildRequires:	flex

%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
BuildRequires:	byacc
%endif

%if 0%{?suse_version} || 0%{?sles_version}
BuildRequires:	bison
%endif

BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)

%description
radvd is the router advertisement daemon for IPv6.  It listens to router
solicitations and sends router advertisements as described in "Neighbor
Discovery for IP Version 6 (IPv6)" (RFC 2461).  With these advertisements
hosts can automatically configure their addresses and some other
parameters.  They also can choose a default router based on these
advertisements.

Install radvd if you are setting up IPv6 network and/or Mobile IPv6
services.

%prep
%setup -q
%patch0 -p1

%build
%configure --with-pidfile=/var/run/radvd/radvd.pid
%__make
# make %{?_smp_mflags} 
# Parallel builds still fail because seds that transform y.tab.x into
# scanner/gram.x are not executed before compile of scanner/gram.x
#

%install
[ $RPM_BUILD_ROOT != "/" ] && rm -rf $RPM_BUILD_ROOT

%__make DESTDIR=$RPM_BUILD_ROOT install

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig
mkdir -p $RPM_BUILD_ROOT%{initdir}
mkdir -p $RPM_BUILD_ROOT/var/run/radvd

%if 0%{?suse_version} || 0%{?sles_version}
%__install -m 644 suse/radvd.conf.empty $RPM_BUILD_ROOT%{_sysconfdir}/radvd.conf
%__install -m 755 suse/radvd.init $RPM_BUILD_ROOT%{initdir}/radvd
%__install -D -m 644 suse/radvd.sysconfig %{buildroot}/var/adm/fillup-templates/sysconfig.%{name}
%endif

%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
%__install -m 644 redhat/radvd.conf.empty $RPM_BUILD_ROOT%{_sysconfdir}/radvd.conf
%__install -m 755 redhat/radvd.init $RPM_BUILD_ROOT%{initdir}/radvd
%__install -m 644 redhat/radvd.sysconfig $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/radvd
%endif

%clean
[ $RPM_BUILD_ROOT != "/" ] && rm -rf $RPM_BUILD_ROOT

%postun
if [ "$1" -ge "1" ]; then
%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
    /sbin/service radvd condrestart >/dev/null 2>&1
%endif
%if 0%{?suse_version} || 0%{?sles_version}
%restart_on_update %{name}
%endif
fi

if [ $1 = 0 ]; then
        /usr/sbin/userdel radvd > /dev/null 2>&1 || :
fi

%post
%if 0%{?suse_version} || 0%{?sles_version}
%fillup_and_insserv %{name}
%endif
%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
/sbin/chkconfig --add radvd
%endif

%preun
if [ $1 = 0 ]; then
%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
   /sbin/service radvd stop >/dev/null 2>&1
   /sbin/chkconfig --del radvd
%endif
%if 0%{?suse_version} || 0%{?sles_version}
%stop_on_removal %{name}
%{insserv_cleanup}
%endif
fi

%pre
/usr/sbin/useradd -c "radvd user" -r -M -s /sbin/nologin -u %{RADVD_UID} -d / radvd 2>/dev/null || :

%files
%defattr(-,root,root,-)
%doc COPYRIGHT README CHANGES INTRO.html TODO
%config(noreplace) %{_sysconfdir}/radvd.conf
%if 0%{?rhel_version} || 0%{?centos_version} || 0%{?fedora_version}
%config(noreplace) /etc/sysconfig/radvd
%endif
%if 0%{?suse_version} || 0%{?sles_version}
/var/adm/fillup-templates/sysconfig.%{name}
%endif
%{initdir}/radvd
%dir %attr(-,radvd,radvd) /var/run/radvd/
%doc radvd.conf.example
%{_mandir}/*/*
%{_sbindir}/radvd
%{_sbindir}/radvdump

%changelog
* Thu Sep 30 2010 Carsten Schoene <cs@linux-administrator.com> - 1.6-1
- update to release 1.6

* Thu Apr 23 2009 Carsten Schoene <cs@linux-administrator.com> - 1.2-2
- update spec for cross distribution build
- added suse config & init scripts

* Tue Oct 28 2008 Pekka Savola <pekkas@netcore.fi> - 1.2-1
- 1.2; remove -D_GNU_SOURCE

* Mon Feb  4 2008 Pekka Savola <pekkas@netcore.fi> - 1.1-1
- 1.1

* Wed Nov  1 2006 Pekka Savola <pekkas@netcore.fi> - 1.0-1
- 1.0; add BuildRequires

* Fri Jan 13 2006 Pekka Savola <pekkas@netcore.fi> - 0.9.1-1
- 0.9.1

* Tue Oct 18 2005 Pekka Savola <pekkas@netcore.fi> - 0.9-1
- 0.9 (also minor spec file cleanup in %%configure).

* Fri Jul  8 2005 Pekka Savola <pekkas@netcore.fi> - 0.8-1
- 0.8.
- Ship the example config file as %%doc (Red Hat's #159005)

* Mon Feb 21 2005 Pekka Savola <pekkas@netcore.fi> - 0.7.3-1
- 0.7.3.

* Mon Oct 28 2002 Pekka Savola <pekkas@netcore.fi>
- 0.7.2.

* Tue May  7 2002 Pekka Savola <pekkas@netcore.fi>
- remove '-g %%{RADVD_GID}' when creating the user, which may be problematic
  if the user didn't exist before.

* Wed Jan 14 2002 Pekka Savola <pekkas@netcore.fi>
- 0.7.1.

* Tue Jan  8 2002 Pekka Savola <pekkas@netcore.fi>
- Change 'reload' to signal HUP to radvd instead or restarting.

* Fri Dec 28 2001 Pekka Savola <pekkas@netcore.fi>
- License unfortunately is BSD *with* advertising clause, so to be pedantic,
  change License: to 'BSD-style'.

* Wed Nov 14 2001 Pekka Savola <pekkas@netcore.fi>
- spec file cleanups
- update to 0.7.0.

* Wed Jun 20 2001 Pekka Savola <pekkas@netcore.fi>
- use /sbin/service.
- update to 0.6.2pl4.

* Sat Apr 28 2001 Pekka Savola <pekkas@netcore.fi>
- update to 0.6.2pl3.

* Wed Apr 11 2001 Pekka Savola <pekkas@netcore.fi>
- update to 0.6.2pl2.

* Wed Apr  4 2001 Pekka Savola <pekkas@netcore.fi>
- update to 0.62pl1.  Bye bye patches!
- Require: initscripts (should really be with a version providing IPv6)
- clean up the init script, make condrestart work properly
- Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.

* Sun Apr  1 2001 Pekka Savola <pekkas@netcore.fi>
- add patch to chroot (doesn't work well yet, as /proc is used directly)
- clean up droproot patch, drop the rights earlier; require user-writable
pidfile directory
- set up the pidfile directory at compile time.

* Sat Mar 31 2001 Pekka Savola <pekkas@netcore.fi>
- add select/kill signals patch from Nathan Lutchansky <lutchann@litech.org>.
- add address syntax checked fix from Marko Myllynen <myllynen@lut.fi>.
- add patch to check the pid file before fork.
- add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
default one.
- add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
- fix initscript NETWORKING_IPV6 check.

* Sun Mar 18 2001 Pekka Savola <pekkas@netcore.fi>
- add droproot patch, change to nobody by default (should use radvd:radvd or
the like, really).

* Mon Mar  5 2001 Tim Powers <timp@redhat.com>
- applied patch supplied by Pekka Savola in #30508
- made changes to initscript as per Pekka's suggestions

* Thu Feb 15 2001 Tim Powers <timp@redhat.com>
- needed -D_GNU_SOURCE to build properly

* Tue Feb  6 2001 Tim Powers <timp@redhat.com>
- use %%configure and %%makeinstall, just glob the manpages, cleans
  things up
- fixed initscript so that it can be internationalized in the future

* Fri Feb 2 2001 Pekka Savola <pekkas@netcore.fi>
- Create a single package(source) for glibc21 and glibc22 (automatic
Requires can handle this just fine).
- use %%{_mandir} and friends
- add more flesh to %doc
- streamline %config file %attrs
- streamline init.d file a bit:
   * add a default chkconfig: (default to disable for security etc. reasons; 
     also, the default config isn't generic enough..)
   * add reload/condrestart
   * minor tweaks
   * missing: localization support (initscripts-5.60)
- use %%initdir macro

* Thu Feb 1 2001 Lars Fenneberg <lf@elemental.net>
- updated to new release 0.6.2

* Thu Feb 1 2001 Marko Myllynen <myllynen@lut.fi>
- initial version, radvd version 0.6.1