File pmacct.spec of Package pmacct - j0ke.net Open Build Service

File pmacct.spec of Package pmacct (Revision a5bcb0d39308dcbec5a977af14a6203f)

Currently displaying revision a5bcb0d39308dcbec5a977af14a6203f, show latest

Summary:		Promiscuous mode IP Accounting package
Name:			pmacct
Version:		0.14.1
Release:		1
License:		GPL
Group:			Productivity/Networking/Diagnostic
Source0:		%{name}-%{version}.tar.bz2
Source1:		nfacctd.init
Source2:		pmacctd.init
Source3:		sfacctd.init
Source4:		nfacctd.init.rh
Source5:		pmacctd.init.rh
Source6:		sfacctd.init.rh
URL:			http://www.pmacct.net/
BuildRoot:		%{_tmppath}/%{name}-root
Requires:		postgresql-libs sqlite
BuildRequires:		mysql-devel postgresql-devel
BuildRequires:		-post-build-checks
%if %{?suse_version:1}0
Requires:		mysql-shared
%if %suse_version > 920
BuildRequires:		sqlite-devel
%endif
%else
BuildRequires:		sqlite-devel
%endif
%if %{?fedora_version:1}0
BuildRequires:		kernel
%endif
%if %{?mandriva_version:1}0
Requires:		libpcap0 mysql-shared
BuildRequires:		libpcap0-devel
%else
Requires:		libpcap
BuildRequires:		libpcap
%endif
%if 0%{?suse_version} >= 1030
BuildRequires:		libpcap-devel
%endif
%if 0%{?centos_version} || 0%{?rhel_version}
Requires:		mysql
BuildRequires:		libpcap-devel
%endif

%description
pmacct is a small set of passive network monitoring tools to measure, account, classify and aggregate IPv4 and IPv6 traffic; a pluggable and flexible architecture allows to store the collected traffic data into memory tables or SQL (MySQL, SQLite, PostgreSQL) databases. pmacct supports fully customizable historical data breakdown, flow sampling, filtering and tagging, recovery actions, and triggers. Libpcap, sFlow v2/v4/v5 and NetFlow v1/v5/v7/v8/v9 are supported, both unicast and multicast. Also, a client program makes it easy to export data to tools like RRDtool, GNUPlot, Net-SNMP, MRTG, and Cacti.

%prep
%setup -q

%build
export CFLAGS="$RPM_OPT_FLAGS"
export AM_CFLAGS="$RPM_OPT_FLAGS"
PMACCT_BASE_CONFIG="
    --prefix=%{_prefix}
    --bindir=%{_bindir}
    --sbindir=%{_sbindir}
    --sysconfdir=%{_sysconfdir}/%{name}
    --enable-64bit
    --enable-mysql
    --enable-pgsql
    --enable-ipv6
    --enable-ulog
    --enable-threads
%if %{?suse_version:1}0
%if %{suse_version} > 920
    --enable-sqlite3
%endif
    --with-pgsql-includes=/usr/include/pgsql/
%endif
%if %{?mandriva_version:1}0
    --with-pgsql-includes=/usr/include/pgsql/
    --with-pcap-includes=/usr/include/
%endif
%if 0%{?centos_version} || 0%{?rhel_version}
	--with-mysql-libs=%{_libdir}/mysql
%endif
"

./configure $PMACCT_BASE_CONFIG
make
chmod -x docs/* examples/* sql/*

%install
%{__rm} -rf %{buildroot}
%makeinstall

%if 0%{?suse_version} || 0%{?mandriva_version}
%{__install} -Dpm555 %{SOURCE1} %{buildroot}/%{_sysconfdir}/init.d/nfacctd
%{__install} -Dpm555 %{SOURCE2} %{buildroot}/%{_sysconfdir}/init.d/pmacctd
%{__install} -Dpm555 %{SOURCE3} %{buildroot}/%{_sysconfdir}/init.d/sfacctd
ln -sf ../../etc/init.d/nfacctd $RPM_BUILD_ROOT/usr/sbin/rcnfacctd
ln -sf ../../etc/init.d/pmacctd $RPM_BUILD_ROOT/usr/sbin/rcpmacctd
ln -sf ../../etc/init.d/sfacctd $RPM_BUILD_ROOT/usr/sbin/rcsfacctd
%else
%{__install} -Dpm555 %{SOURCE4} %{buildroot}/%{_sysconfdir}/init.d/nfacctd
%{__install} -Dpm555 %{SOURCE5} %{buildroot}/%{_sysconfdir}/init.d/pmacctd
%{__install} -Dpm555 %{SOURCE6} %{buildroot}/%{_sysconfdir}/init.d/sfacctd
%endif

%{__install} -Dpm555 examples/nfacctd-sql_v2.conf.example %{buildroot}/%{_sysconfdir}/pmacct/nfacctd.conf
%{__install} -Dpm555 examples/pmacctd-sql_v2.conf.example %{buildroot}/%{_sysconfdir}/pmacct/pmacctd.conf
touch %{buildroot}/%{_sysconfdir}/pmacct/sfacctd.conf
strip %{buildroot}%{_bindir}/pmacct
strip %{buildroot}%{_bindir}/pmmyplay
strip %{buildroot}%{_bindir}/pmpgplay
strip %{buildroot}%{_sbindir}/nfacctd
strip %{buildroot}%{_sbindir}/pmacctd
strip %{buildroot}%{_sbindir}/sfacctd

%clean
%{__rm} -rf %{buildroot}

%postun
%if 0%{?suse_version}
%insserv_cleanup
%endif

%preun
%if 0%{?suse_version}
%stop_on_removal
%endif

%files
%defattr(-, root, root)
%doc AUTHORS ChangeLog CONFIG-KEYS COPYING EXAMPLES FAQS INSTALL KNOWN-BUGS NEWS README TODO TOOLS UPGRADE docs examples sql
%defattr(-, root, root, 0755)
%{_bindir}/*
%{_sbindir}/*
%{_sysconfdir}/init.d/*
%dir %{_sysconfdir}/pmacct
%config(noreplace) %attr(0600,root,root) %{_sysconfdir}/pmacct/nfacctd.conf
%config(noreplace) %attr(0600,root,root) %{_sysconfdir}/pmacct/pmacctd.conf
%config(noreplace) %attr(0600,root,root) %{_sysconfdir}/pmacct/sfacctd.conf

%changelog
* Wed Dec 29 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.5-1
- update to release 0.12.5

* Sun Oct 03 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.4-1
- update to release 0.12.4

* Mon Aug 09 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.3-2
- fix postun/preun

* Sat Jul 31 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.3-1
- update to release 0.12.3

* Thu Jun 17 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.2-2
- added centos/redhat init scripts

* Fri May 28 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.2-1
- update to release 0.12.2
  + A new 'tee' plugin is introduced bringing both NetFlow and sFlow
    replication capabilities to pmacct. It supports transparent mode
    (tee_transparent), coarse-grained filtering capabilities via the
    Pre-Tagging infrastructure. Quickstart guide is included as part
    of the EXAMPLES file (chapter XII).
  + nfprobe, sfprobe: introduced support for export of the BGP next-hop 
    information. Source data selection for BGP next-hop is being linked
    to [pmacctd_as|uacctd_as] configuration directive. Hence it must be
    set to 'bgp' in order for this feature to work.
  + nfprobe, sfprobe, BGP daemon: new set of features (nfprobe_ipprec,
    sfprobe_ipprec, bgp_daemon_ipprec) allows to mark self-originated
    sFlow, NetFlow and BGP datagrams with the supplied IP precedence
    value.
  + peer_src_ip (IP address of the NetFlow emitter, agent ID of the
    sFlow emitter) and peer_dst_ip (BGP next-hop) can now be filled
    from NetFlow/sFlow protocols data other than BGP. To activate the
    feature nfacctd_as_new/sfacctd_as_new have to be 'false' (default
    value), 'true' or 'file'.
  + print plugin: introduced support for Comma-Separated Values (CSV)
    output in addition to formatted-text. A new print_output feature
    allows to switch between the two.  
  + pmacctd: improved 802.1ad support. While recursing, outer VLAN is
    always reported as value of the 'vlan' primitive.
  ! fix, pmacctd: 802.1p was kept integral part of the 'vlan' value.
    Now a 0x0FFF mask is applied in order to return only the VLAN ID.
  ! fix, pkt_handlers.c: added trailing '\0' symbol when truncating
    AS-PATH and BGP community strings due to length constraints.
  ! fix, sql_common.c: maximum SQL writers warning message was never
    reached unless a recovery method is specifited. Thanks to Sergio
    Charpinel Jr for reporting the issue.
  ! fix, MySQL and PostgreSQL plugins: PGRES_TUPLES_OK (PostgreSQL)
    and errno 1050 (MySQL) are now considered valid return codes when
    dynamic tables are involved (ie. sql_table_schema). Thanks to
    Sergio Charpinel Jr for his support.
  ! fix, BGP daemon: pkt_bgp_primitives struct has been explicitely
    64-bit aligned. Mis-alignment was causing crashes when buffering
    was enabled (plugin_buffer_size). Verified on Solaris/sparc.

* Thu Apr 08 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.1-1
- update to release 0.12.1
  + Input/output interfaces (SNMP indexes) have now been implemented
    natively; it's therefore not required anymore to pass through the
    (Pre-)tag infrastructure. As a result two aggregation primitives
    are being introduced: 'in_iface' and 'out_iface'.
  + Support for source/destination IP prefix masks is introduced via
    two new aggregation primitives: src_mask and dst_mask. These are
    populated as defined by the [nf|sf|pm|u]acctd_net directive:
    NetFlow/sFlow protocols, BGP, Network files (networks_file) or
    static (networks_mask) being valid data sources.
  + A generic tunnel inspection infrastructure has been developed to
    benefit both pmacctd and uacctd daemons. Handlers are defined via
    configuration file. Once enabled daemons will account basing upon
    tunnelled headers rather than the envelope. Currently the only
    supported tunnel protocol is GTP, the GPRS tunnelling protocol
    (which can be configured as: "tunnel_0: gtp, <UDP port>"). Up to
    8 different tunnel stacks and up to 4 tunnel layers per stack are
    supported. First matching stack, first matching layer wins.
  + uacctd: support for the MAC layer has been added for the Netlink/
    ULOG Linux packet capturing framework.
  + 'nfprobe_source_ip' feature introduced: it allows to select the
    IPv4/IPv6 address to be used to export NetFlow datagrams to the
    collector.
  + nfprobe, sfprobe: network masks are now exported via NetFlow and
    sFlow. 'pmacctd_net' and its equivalent directives define how to
    populate src_mask and dst_mask values.
  ! cleanup, nfprobe/sfprobe: data source for 'src_as' and 'dst_as'
    primitives is now expected to be always explicitely defined (in
    line with how 'src_net' and 'dst_net' primitives work). See the
    UPGRADE doc for the (limited) backward compatibility impact.
  ! Updated SQL documentation: sql/README.iface guides on 'in_iface'
    and 'out_iface' primitives; sql/README.mask guides on 'src_mask'
    and 'dst_mask' primitives; sql/README.is_symmetric guides on
    'is_symmetric' primitive. 
  ! fix, nfacctd.h: source and destination network masks were twisted
    in the NetFlow v5 export structure definition. Affected releases
    are: 0.12.0rc4 and 0.12.0.
  ! fix, nfprobe_plugin.c: l2_to_flowrec() was missing some variable
    declaration when the package was configured for compilation with
    --disable-l2. Thanks to Brent Van Dussen for reporting the issue. 
  ! fix, bgp.c: bgp_attr_munge_as4path() return code was not defined
    for some cases. This was causing some BGP messages to be marked
    as malformed.
  ! fix, sfprobe: a dummy MAC layer was created whenever this was not
    included as part of the captured packet. This behaviour has been
    changed and header protocol is now set to 11 (IPv4) or 12 (IPv6)
    accordingly. Thanks to Neil McKee for pointing the issue. 
  ! workaround, building sub-system: PF_RING enabled libpcap was not
    recognized due to missing of pcap_dispatch(). This is now fixed.

* Wed Feb 17 2010 Carsten Schoene <cs@linux-administrator.com> - 0.12.0-1
- update to release 0.12.0
  + 'is_symmetric' aggregation primitive has been implemented: aimed
    at easing detection of asymmetric traffic. It's based on rule
    definitions supplied in a 'bgp_is_symmetric_map' map, reloadable
    at runtime.
  + A new 'bgp_daemon_allow_file' configuration directive allows to
    specify IP addresses that can establish a BGP session with the
    collector's BGP thread. Many thanks to Erik van der Burg for
    contributing the idea.
  + 'nfacctd_ext_sampling_rate' and 'sfacctd_ext_sampling_rate' are
    introduced: they flag the daemon that captured traffic is being
    sampled. Useful to tackle corner cases, ie. the sampling rate
    reported by the NetFlow/sFlow agent is missing or incorrect.
  + The 'bgp_follow_nexthop' feature has been extended so that extra
    IPv4/IPv6 prefixes can be supplied. Up to 32 IP prefixes are now
    supported and a warning message is generated whenever a supplied
    string fails parsing.
  + Pre-Tagging: implemented 'src_local_pref' and 'src_comms' keys.
    These allow tagging based on source IP prefix local_pref (sourced
    from either a map or BGP, ie. 'bgp_src_local_pref_type: map',
    'bgp_src_local_pref_type: bgp') and standard BGP communities.
  + Pre-Tagging: 'src_peer_as' key was extended in order to match on
    BGP-sourced data (bgp_peer_src_as_type: bgp).
  + Pre-Tagging: introduced 'comms' key to tag basing on up to 16
    standard BGP communities attached to the destination IP prefix.
    The lookup is done against the BGP RIB of the exporting router.
    Comparisons can be done in either match-any or match-all fashion;
    xidDocumentation and examples updated.
  ! fix, util.c: load_allow_file(), empty allow file was granting a
    connection to everybody being confused with a 'no map' condition.
    Now this case is properly recognized and correctly translates in
    a reject all clause.
  ! fix, sql_common.c: log of NetFlow micro-flows to a SQL database
    (nfacctd_sql_log directive) was not correctly getting committed
    to the backend, when sql_history was disabled.
  ! fix, mysql|pgsql|sqlite_plugin.c: 'flows' aggregation primitive
    was not suitable to mix-and-match with BGP related primitives
    (ie. peer_dst_as, etc.) due to an incorrect check. Many thanks
    to Zenon Mousmoulas for the bug report.
  ! fix, pretag_handlers.c: tagging against NetFlow v9 4-bytes in/out
    interfaces was not working properly. Thanks to Zenon Mousmoulas
    for reporting the issue.

* Wed Apr 08 2009 Carsten Schoene <cs@linux-administrator.com> - 0.11.6-1
- update to release 0.11.6
 - This release introduces support for tag ranges
   into the Pre-Tagging infrastructure.
 - tcpdump-style filters, e.g. 'aggregate_filter', 
   now support indexing within a packet, e.g. 'ether[12:2]',
   to allow more flexible separation of the traffic.
 - There are fixes to libpcap, sFlow, and NetFlow collectors,
   the MySQL plugin, stream classification, and IPv6 code.

* Thu Jul 24 2008 Carsten Schoene <cs@linux-administrator.com> - 0.11.5-1
- update to release 0.11.5

* Fri Nov 17 2006  Peter Nixon <peter+rpmspam@suntel.com.tr> 0.10.1
- Changed the permissions of the conf files to writable

* Tue May 16 2006  Peter Nixon <peter+rpmspam@suntel.com.tr> 0.10.1
- Cleaned up SPEC file a some more and updated to 0.10.1

* Wed May 10 2006  Peter Nixon <peter+rpmspam@suntel.com.tr> 0.10.0
- Fixup spec file to work properly on SUSE Build system

* Tue Dec 27 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.6-2
- fixed package descriptions and conflicts for alldb

* Tue Dec 27 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.6-1
- upgraded to 0.9.6
- split database backends into separate binaries
- added 64bit counter support by default

* Fri Dec 08 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.5-1
- upgraded to 0.9.5
- removed shortver

* Mon Nov 13 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.4p1-1
- upgraded to 0.9.4p1
- defined shortver since directory didn't change

* Mon Nov 13 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.4-1
- upgraded to 0.9.4

* Tue Oct 12 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.3-1
- upgraded to 0.9.3

* Tue Aug 23 2005  Douglas E. Warner <silfreed@silfreed.net> 0.9.1-1
- upgraded to 0.9.1

* Tue May 24 2005  Douglas E. Warner <silfreed@silfreed.net> 0.8.6-2
- changed 'libmysqlclient' Require to 'mysql'

* Mon May 23 2005  Douglas E. Warner <silfreed@silfreed.net> 0.8.6-1
- removed epoch (old versions won't upgrade correctly)
- upgraded to 0.8.6

* Sat Apr 10 2004  Douglas E. Warner <dwarner@ctinetworks.com>
- Initial RPM release.