File mythweb.conf of Package mythplugins

#
# Apache configuration directives for MythWeb.  Please read INSTALL for setup
# requirements and troubleshooting, along with the comments in this file.
#

############################################################################
# If you intend to use authentication for MythWeb (see below), you will
# probably also want to uncomment the following rules, which disable
# authentication for MythWeb's download URLs so you can properly stream
# to media players that don't work with authenticated servers.
#
#    <LocationMatch .*/pl/stream/[0-9]+/[0-9]+>
#        Allow from all
#    </LocationMatch>
#
#    <LocationMatch .*/music/stream.php>
#        Allow from all
#    </LocationMatch>

#
# CHANGE THIS PATH TO MATCH YOUR MYTHWEB INSTALLATION DIRECTORY!  e.g.
#
#    /var/www
#    /home/www/htdocs
#    /var/www/html/mythweb
#    /srv/www/htdocs/mythweb
#
    <Directory "/srv/www/htdocs/mythweb" >

############################################################################
    # I *strongly* urge you to turn on authentication for MythWeb.  It is disabled
    # by default because it requires you to set up your own password file.  Please
    # see the man page for htdigest and then configure the following four directives
    # to suit your authentication needs.
    #
    #    AuthType           Digest
    #    AuthName           "MythTV"
    #    AuthUserFile       /var/www/htdigest
    #    Require            valid-user
    #    BrowserMatch       "MSIE"      AuthDigestEnableQueryStringHack=On
    #    Order              allow,deny
    #    Satisfy            any
    #
    #  * If you're running Apache earlier than 2.2, you will need to use
    #    the AuthDigestFile command instead of AuthUserFile (3rd line above).
    #
    ############################################################################
    # Some special instructions for the MythWeb controller files
    #
        <Files mythweb.*>

#
        # Use the following environment settings to tell MythWeb where you want it to
        # look to connect to the database, the name of the database to connect to, and
        # the authentication info to use to connect.  The defaults will usually work
        # fine unless you've changed mythtv's mysql.txt file, or are running MythWeb on
        # a different server from your main backend.  Make sure you have mod_env enabled.
        #
            setenv db_server        "localhost"
            setenv db_name          "mythconverg"
            setenv db_login         "mythtv"
            setenv db_password      "mythtv"

#
        # By default, MythWeb uses the hostname program to look up the hostname of the
        # machine it runs on.  If this reports incorrect data, or you run MythWeb on a
        # machine without the hostname program, set this to your current hostname.
        #
        #   setenv hostname         "my_mythbox"
        #

# By default, php will always search the current directory for include files,
        # but if you wish to install these directories outside of the current path
        # (eg. for security reasons), set this variable to the directory that
        # contains the directories like languages and templates.  eg.
        #
        #   setenv include_path      "/usr/share/mythweb"

# If you want MythWeb to email php/database errors (and a backtrace) to you,
        # uncomment and set the email address below.
        #
        #   setenv error_email       "mythweb_errors@example.com"
        #

# If your local file system is something other than UTF-8, set this variable
        # so that the music and video portions of MythWeb can provide proper links
        # to your downloadable files.
        #
        #   setenv fs_encoding       "ISO-8859-1"

</Files>

############################################################################
    # The following settings relate to PHP config.
    #

#  These settings are intended for apache 2.x.  If your version of apache
        #  doesn't support php_value, or things like memory_limit aren't working
        #  as expected, then use these settings as examples for your own php.ini
        #  files.
            php_value safe_mode                     0

php_value memory_limit                  32M

php_value register_globals              0
            php_value magic_quotes_gpc              0
            php_value file_uploads                  0
            php_value allow_url_fopen               On

php_value zlib.output_handler           Off
            php_value output_handler                NULL

# Note: php_flag does not work in older versions of php
            php_flag output_handler                 "NULL"

</Files>

############################################################################
    # The settings below relate specifically to mod_rewrite and the rewrite
    # engine used to make the MythWeb user experience a little easier to deal
    # with by simplifying the URLs needed to access the various sections.  Do
    # not touch these settings unless you really know what you're doing..
    #
    <IfModule mod_rewrite.c>

# Turn on the rewrite engine
            RewriteEngine  on

# If MythWeb is installed outside of the document root (eg. using Alias) then
        # you will need to set this directive to the base URL that MythWeb is visible
        # from externally.  If you do not, the web server will return 'not found'.
        #    RewriteBase    /mythweb

# Redirect /pl/ requests to the perl cgi handler.
            RewriteRule     ^(pl(/.*)?)$            mythweb.pl/$1               [QSA,L]

# Redirect most of the remaining URL requests to the main mythweb script.
        # It will then handle any requests given to it.
            RewriteRule     ^(.+)$                  mythweb.php/$1              [QSA,L]

# If you're experiencing trouble with the previous two lines in your copy of
        # apache, you could instead use something like:
        #    RewriteRule     ^(pl(/.*)?)$           mythweb.pl?PATH_INFO=/$1    [L,QSA]
        #    RewriteRule     ^(.+)$                 mythweb.php?PATH_INFO=/$1   [L,QSA]

# Catch anything else that comes through and send it to mythweb.php with no parameters.
            RewriteRule     ^(.*)$                  mythweb.php                 [QSA,L]
    </IfModule>

############################################################################
    # You really shouldn't need to edit anything below this line, so please
    # don't unless you know what you're doing.
    #

# Allow .htaccess to override whatever it wants from the server config.
        AllowOverride   All

# Allow browsers to follow symlinks that point outside of the web document
    # tree.  This is how we access music, videos, etc.
        Options         FollowSymLinks

# MythTV now uses the correct file suffix for mpeg files, so all .nuv files
    # should actually be NuppleVideo.  However, apache probably doesn't know what
    # those are, so we should tell it.
        AddType video/nuppelvideo   .nuv

# Specify the MIME type for favicon.ico in case the server configuration
    # doesn't or in case the server configuration uses the IANA-approved MIME type
    # (image/vnd.microsoft.icon)--which most browsers won't recognize.
        AddType image/x-icon        .ico

<IfModule mod_deflate.c>
        # Enable mod_deflate.  This works MUCH more reliably than PHP's built-in
        # gzip/Zlib compressors.  It is disabled here because many distros seem not
        # to enable mod_deflate by default, but I strongly recommend that you
        # enable this section.

BrowserMatch ^Mozilla/4 gzip-only-text/html
        BrowserMatch ^Mozilla/4\.0[678] no-gzip
        BrowserMatch \bMSIE !no-gzip !gzip-only-text/html
    
        AddOutputFilterByType DEFLATE text/html
        AddOutputFilterByType DEFLATE text/css
        AddOutputFilterByType DEFLATE application/x-javascript

# This is helpful for mod_deflate -- it prevents proxies from changing
        # the user agent to/from this server, which can prevent compression from
        # being enabled.  It is disabled here because many distros seem not to
        # enable mod_headers by default, but I recommend that you enable it.
    
        Header append Vary User-Agent env=!dont-vary
    </IfModule>

# Set up the perl handler so we can stream properly.  Do not use mod_perl
    # because it has a tendency to hold onto child processes, which causes
    # problems if the browser closes on an in-progress stream.
    #
        <Files *.pl>
            SetHandler cgi-script
            Options +ExecCGI
        </Files>

</Directory>