File cups-paper.patch of Package seamonkey - j0ke.net Open Build Service

File cups-paper.patch of Package seamonkey (Revision 91e31c3bcb50e771a49ea6602e6960ca)

Currently displaying revision 91e31c3bcb50e771a49ea6602e6960ca, show latest

From: Wolfgang Rosenauer <stark@suse.de>, Arne John Glenstrup <panic@itu.dk>
Subject: get paper sizes from CUPS
References:
https://bugzilla.novell.com/show_bug.cgi?id=65482
https://bugzilla.mozilla.org/show_bug.cgi?id=324060

================================================================================
--- gfx/src/gtk/nsDeviceContextSpecG.cpp
+++ gfx/src/gtk/nsDeviceContextSpecG.cpp
@@ -66,6 +66,7 @@
 #ifdef USE_POSTSCRIPT
 #include "nsPSPrinters.h"
 #include "nsPaperPS.h"  /* Paper size list */
+#include "nsPaperFactoryPS.h"  /* Paper size list factory */
 #endif /* USE_POSTSCRIPT */
 
 /* Ensure that the result is always equal to either PR_TRUE or PR_FALSE */
@@ -1210,34 +1211,38 @@
 #ifdef SET_PRINTER_FEATURES_VIA_PREFS
     printerFeatures.SetCanChangePaperSize(PR_TRUE);
 #endif /* SET_PRINTER_FEATURES_VIA_PREFS */
-    nsXPIDLCString papername;
-    if (NS_SUCCEEDED(CopyPrinterCharPref(pPrefs, "postscript", printerName, "paper_size", getter_Copies(papername)))) {
-      nsPaperSizePS paper;
-
-      if (paper.Find(papername)) {
-        DO_PR_DEBUG_LOG(("setting default paper size to '%s' (%g mm/%g mm)\n",
-              paper.Name(), paper.Width_mm(), paper.Height_mm()));
-        aPrintSettings->SetPaperSizeUnit(paper.IsMetric() ?
-            (int)nsIPrintSettings::kPaperSizeMillimeters :
-            (int)nsIPrintSettings::kPaperSizeInches);
-        aPrintSettings->SetPaperWidth(paper.Width_mm());
-        aPrintSettings->SetPaperHeight(paper.Height_mm());
-        aPrintSettings->SetPaperName(NS_ConvertASCIItoUCS2(paper.Name()).get());
-      }
-      else {
-        DO_PR_DEBUG_LOG(("Unknown paper size '%s' given.\n", papername.get()));
+    {
+      nsIPaperSizePS* paper;
+      nsresult rv;
+      rv = nsPaperFactoryPS::CreatePaper
+        (fullPrinterName.get(), printerName.get(), paper);
+      if (NS_FAILED(rv)) return rv;
+      paper->FindDefault();
+
+      nsXPIDLCString papername;
+      if (NS_SUCCEEDED(CopyPrinterCharPref(pPrefs, "postscript", fullPrinterName, "print_paper_name", getter_Copies(papername)))) {
+        if (!paper->Find(papername)) {
+          DO_PR_DEBUG_LOG(("Unknown paper size '%s' given.\n", papername.get()));
+        }
       }
+      DO_PR_DEBUG_LOG(("setting default paper size to '%s' (%g mm/%g mm)\n",
+              paper->Name(), paper->Width_mm(), paper->Height_mm()));
+      aPrintSettings->SetPaperSizeUnit(nsIPrintSettings::kPaperSizeMillimeters);
+      aPrintSettings->SetPaperWidth(paper->Width_mm());
+      aPrintSettings->SetPaperHeight(paper->Height_mm());
+      aPrintSettings->SetPaperName(NS_ConvertASCIItoUTF16(paper->Name()).get());
 #ifdef SET_PRINTER_FEATURES_VIA_PREFS
-      paper.First();
+      paper->First();
       int count = 0;
-      while (!paper.AtEnd())
+      while (!paper->AtEnd())
       {
-        printerFeatures.SetPaperRecord(count++, paper.Name(),
-            (int)paper.Width_mm(), (int)paper.Height_mm(), !paper.IsMetric());
-        paper.Next();
+        printerFeatures.SetPaperRecord(count++, paper->Name(),
+            (int)paper->Width_mm(), (int)paper->Height_mm(), !paper->IsMetric());
+        paper->Next();
       }
       printerFeatures.SetNumPaperSizeRecords(count);
 #endif /* SET_PRINTER_FEATURES_VIA_PREFS */
+      delete(paper);
     }
 
     PRBool hasSpoolerCmd = (nsPSPrinterList::kTypePS ==
--- gfx/src/ps/nsPrintJobPS.cpp
+++ gfx/src/ps/nsPrintJobPS.cpp
@@ -364,6 +364,10 @@
     const char *slash = strchr(printerName, '/');
     mPrinterName = slash ? slash + 1 : printerName;
     mJobTitle.SetIsVoid(PR_TRUE);
+    /* Paper name */
+    const char* paperName = nsnull;
+    aSpec->GetPaperName(&paperName);
+    mPaperName = paperName;
     return NS_OK;
 }
 
@@ -445,6 +449,11 @@
                                                        mNumCopies.get(),
                                                        dest->num_options,
                                                        &dest->options);
+        if (!mPaperName.IsEmpty())
+            dest->num_options = (mCups.mCupsAddOption)("media",
+                                                       mPaperName.get(),
+                                                       dest->num_options,
+                                                       &dest->options);
         const char *title = mJobTitle.IsVoid() ?
             "Untitled Document" : mJobTitle.get();
         result = (mCups.mCupsPrintFile)(printer.CStringAt(0)->get(),
--- gfx/src/ps/nsPrintJobPS.h
+++ gfx/src/ps/nsPrintJobPS.h
@@ -179,6 +179,7 @@
         nsCUPSShim mCups;
         nsCString mPrinterName;
         nsCString mNumCopies;
+        nsCString mPaperName;
         nsCString mJobTitle;        // IsVoid() if no title
 };
 #endif  /* VMS */
--- gfx/src/psshared/Makefile.in
+++ gfx/src/psshared/Makefile.in
@@ -57,13 +57,16 @@
 
 EXPORTS		= nsCUPSShim.h \
 		  nsPaperPS.h \
+		  nsIPaperPS.h \
 		  nsPSPrinters.h\
 		  psSharedCore.h \
+		  nsPaperFactoryPS.h \
 		  $(NULL)
 
 CPPSRCS		= nsCUPSShim.cpp \
 		  nsPaperPS.cpp \
 		  nsPSPrinters.cpp \
+		  nsPaperFactoryPS.cpp \
 		  $(NULL)
 
 EXTRA_DSO_LDOPTS = \
--- gfx/src/psshared/nsCUPSShim.cpp
+++ gfx/src/psshared/nsCUPSShim.cpp
@@ -45,13 +45,18 @@
 // List of symbols to find in libcups. Must match symAddr[] defined in Init().
 // Making this an array of arrays instead of pointers allows storing the
 // whole thing in read-only memory.
-static const char gSymName[][sizeof("cupsPrintFile")] = {
+static const char gSymName[][sizeof("ppdMarkDefaults")] = {
     { "cupsAddOption" },
     { "cupsFreeDests" },
     { "cupsGetDest" },
     { "cupsGetDests" },
     { "cupsPrintFile" },
     { "cupsTempFd" },
+    { "cupsGetPPD" },
+    { "ppdOpenFile" },
+    { "ppdClose" },
+    { "ppdMarkDefaults" },
+    { "ppdIsMarked" },
 };
 static const int gSymNameCt = sizeof(gSymName) / sizeof(gSymName[0]);
 
@@ -71,6 +76,11 @@
         (void **)&mCupsGetDests,
         (void **)&mCupsPrintFile,
         (void **)&mCupsTempFd,
+        (void **)&mCupsGetPPD,
+        (void **)&mPpdOpenFile,
+        (void **)&mPpdClose,
+        (void **)&mPpdMarkDefaults,
+        (void **)&mPpdIsMarked,
     };
 
     for (int i = gSymNameCt; i--; ) {
--- gfx/src/psshared/nsCUPSShim.h
+++ gfx/src/psshared/nsCUPSShim.h
@@ -62,6 +62,82 @@
     cups_option_t *options;    /* Options */
 } cups_dest_t;
 
+typedef enum			/**** Colorspaces ****/
+{
+  PPD_CS_CMYK = -4,		/* CMYK colorspace */
+  PPD_CS_CMY,			/* CMY colorspace */
+  PPD_CS_GRAY = 1,		/* Grayscale colorspace */
+  PPD_CS_RGB = 3,		/* RGB colorspace */
+  PPD_CS_RGBK,			/* RGBK (K = gray) colorspace */
+  PPD_CS_N			    /* DeviceN colorspace */
+} ppd_cs_t;
+
+typedef struct          /**** Page Sizes ****/
+{
+    int         marked;     /* Page size selected? */
+    char        name[41];
+    /* Media size option */
+    float       width,      /* Width of media in points */
+                length,     /* Length of media in points */
+                left,       /* Left printable margin in points */
+                bottom,     /* Bottom printable margin in points */
+                right,      /* Right printable margin in points */
+                top;        /* Top printable margin in points */
+} ppd_size_t;
+
+typedef struct			/**** Files ****/
+{
+    int         language_level,   /* Language level of device */
+                color_device,     /* 1 = color device, 0 = grayscale */
+                variable_sizes,   /* 1 = supports variable sizes, 0 = doesn't */
+                accurate_screens, /* 1 = supports accurate screens, 0 = not */
+                contone_only,     /* 1 = continuous tone only, 0 = not */
+                landscape,        /* -90 or 90 */
+                model_number,     /* Device-specific model number */
+                manual_copies,    /* 1 = Copies done manually, 0 = hardware */
+                throughput;       /* Pages per minute */
+    ppd_cs_t    colorspace;       /* Default colorspace */
+    char        *patches;         /* Patch commands to be sent to printer */
+    int         num_emulations;   /* Number of emulations supported */
+    void        *emulations;      /* Emulations and the code to invoke them */
+    char        *jcl_begin,       /* Start JCL commands */
+                *jcl_ps,          /* Enter PostScript interpreter */
+                *jcl_end,         /* End JCL commands */
+                *lang_encoding,   /* Language encoding */
+                *lang_version,    /* Language version (English, Spanish, etc.) */
+                *modelname,       /* Model name (general) */
+                *ttrasterizer,    /* Truetype rasterizer */
+                *manufacturer,    /* Manufacturer name */
+                *product,         /* Product name (from PS RIP/interpreter) */
+                *nickname,        /* Nickname (specific) */
+                *shortnickname;   /* Short version of nickname */
+    int         num_groups;       /* Number of UI groups */
+    void        *groups;          /* UI groups */
+    int         num_sizes;        /* Number of page sizes */
+    ppd_size_t  *sizes;           /* Page sizes */
+    float       custom_min[2],    /* Minimum variable page size */
+                custom_max[2],    /* Maximum variable page size */
+                custom_margins[4];/* Margins around page */
+    int         num_consts;       /* Number of UI/Non-UI constraints */
+    void        *consts;          /* UI/Non-UI constraints */
+    int         num_fonts;        /* Number of pre-loaded fonts */
+    char        **fonts;          /* Pre-loaded fonts */
+    int         num_profiles;     /* Number of sRGB color profiles */
+    void        *profiles;    /* sRGB color profiles */
+    int         num_filters;      /* Number of filters */
+    char        **filters;        /* Filter strings... */
+
+    /**** New in CUPS 1.1 ****/
+    int         flip_duplex;      /* 1 = Flip page for back sides */
+    
+    /**** New in CUPS 1.1.19 ****/
+    char        *protocols,       /* Protocols (BCP, TBCP) string */
+                *pcfilename;      /* PCFileName string */
+    int         num_attrs,        /* Number of attributes */
+                cur_attr;         /* Current attribute */
+    void        **attrs;          /* Attributes */
+} ppd_file_t;
+
 typedef cups_dest_t* (PR_CALLBACK *CupsGetDestType)(const char *printer,
                                                     const char *instance,
                                                     int num_dests, 
@@ -80,6 +156,11 @@
                                              const char    *value,
                                              int           num_options,
                                              cups_option_t **options);
+typedef const char* (PR_CALLBACK *CupsGetPPDType) (const char* name);
+typedef ppd_file_t* (PR_CALLBACK *PPDOpenFileType) (const char* filename);
+typedef void (PR_CALLBACK *PPDCloseType) (ppd_file_t* ppd);
+typedef void (PR_CALLBACK *PPDMarkDefaultsType) (ppd_file_t* ppd);
+typedef int (PR_CALLBACK *PPDIsMarkedType) (ppd_file_t* ppd, const char* pname, const char* pname_clear);
 
 struct PRLibrary;
 
@@ -113,6 +194,11 @@
         CupsGetDestsType    mCupsGetDests;
         CupsPrintFileType   mCupsPrintFile;
         CupsTempFdType      mCupsTempFd;
+        CupsGetPPDType      mCupsGetPPD;
+        PPDOpenFileType     mPpdOpenFile;
+        PPDCloseType        mPpdClose;
+        PPDMarkDefaultsType mPpdMarkDefaults;
+        PPDIsMarkedType     mPpdIsMarked;
 
     private:
         PRLibrary *mCupsLib;
--- gfx/src/psshared/nsIPaperPS.h
+++ gfx/src/psshared/nsIPaperPS.h
@@ -0,0 +1,102 @@
+/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/* ex: set tabstop=8 softtabstop=4 shiftwidth=4 expandtab: */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * Contributor(s):
+ *   Arne John Glenstrup <panic@itu.dk>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+ 
+#ifndef _NSIPAPERPS_H_
+#define _NSIPAPERPS_H_
+
+#include "prtypes.h"
+#include "psSharedCore.h"
+
+class nsIPaperSizePS {
+    public:
+        /** ---------------------------------------------------
+         * Virtual destructor.
+         */
+        virtual ~nsIPaperSizePS() {};
+        
+        /* Allow the paper factory to create instances */
+        friend class nsPaperFactoryPS;
+        
+        /** ---------------------------------------------------
+         * @return PR_TRUE if the cursor points past the last item.
+         */
+        virtual PRBool AtEnd() = 0;
+
+        /** ---------------------------------------------------
+         * Position the cursor at the beginning of the paper size list.
+         * @return VOID
+         */
+        virtual void First() = 0;
+
+        /** ---------------------------------------------------
+         * Advance the cursor to the next item.
+         * @return VOID
+         */
+        virtual void Next() = 0;
+
+        /** ---------------------------------------------------
+         * Point the cursor to the entry with the given paper name.
+         * @return PR_TRUE if pointing to a valid entry.
+         */
+        virtual PRBool Find(const char *aName) = 0;
+
+        /** ---------------------------------------------------
+         * Point the cursor to a default  entry if available.
+         * Otherwise it's equivalent to First().
+         * @return PR_TRUE if pointing to a valid entry.
+         */
+        virtual PRBool FindDefault() = 0;
+        
+        /** ---------------------------------------------------
+         * @return a pointer to the name of the current paper size
+         */
+        virtual const char *Name() = 0;
+
+        /** ---------------------------------------------------
+         * @return the width of the page in millimeters
+         */
+        virtual float Width_mm() = 0;
+
+        /** ---------------------------------------------------
+         * @return the height of the page in millimeters
+         */
+        virtual float Height_mm() = 0;
+
+        /** ---------------------------------------------------
+         * @return PR_TRUE if the paper should be presented to
+         *                 the user in metric units.
+         */
+        virtual PRBool IsMetric() { return PR_TRUE; };
+};
+
+#endif /* _NSIPAPERPS_H_ */
--- gfx/src/psshared/nsPSPrinters.h
+++ gfx/src/psshared/nsPSPrinters.h
@@ -44,6 +44,7 @@
 #include "prtypes.h"
 #include "nsCUPSShim.h"
 #include "psSharedCore.h"
+#include "nsCOMPtr.h"
 
 class nsIPrefService;
 class nsIPrefBranch;
--- gfx/src/psshared/nsPaperFactoryPS.cpp
+++ gfx/src/psshared/nsPaperFactoryPS.cpp
@@ -0,0 +1,65 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/* ex: set tabstop=8 softtabstop=4 shiftwidth=4 expandtab: */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is
+ * Kenneth Herron <kherron@fastmail.us>.
+ * Portions created by the Initial Developer are Copyright (C) 2004
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Arne John Glenstrup <panic@itu.dk>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+
+#include "nsDebug.h"
+#include "nsPaperFactoryPS.h"
+#include "nsIPaperPS.h"
+#include "nsPaperPS.h"
+#include "nsPSPrinters.h"
+
+nsresult
+nsPaperFactoryPS::CreatePaper(const char* fullPrinterName,
+                              const char* printerName,
+                              nsIPaperSizePS* &aPaper)
+{
+    nsIPaperSizePS *newPZ;
+
+    if (nsPSPrinterList::kTypeCUPS == nsPSPrinterList::GetPrinterType
+        (nsDependentCString(fullPrinterName)))
+        newPZ = new nsPaperSizeCUPS(fullPrinterName, printerName);
+    else
+        newPZ = new nsPaperSizePS();
+    
+    if (!newPZ)
+        return NS_ERROR_OUT_OF_MEMORY;
+
+    aPaper = newPZ;
+    return NS_OK;
+}
--- gfx/src/psshared/nsPaperFactoryPS.h
+++ gfx/src/psshared/nsPaperFactoryPS.h
@@ -0,0 +1,64 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/* ex: set tabstop=8 softtabstop=4 shiftwidth=4 expandtab: */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * Contributor(s):
+ *   Arne John Glenstrup <panic@itu.dk>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef nsPaperFactoryPS_h__
+#define nsPaperFactoryPS_h__
+
+#include "nscore.h"
+#include "nsIPaperPS.h"
+
+/* Factory class for the paper sizes. This class determines
+ * which paper size class should handle a request, and constructs
+ * an object of the appropriate class.
+ */
+
+class NS_PSSHARED nsPaperFactoryPS
+{
+public:
+    /**
+     * Construct a paper size object for the given device context spec.
+     * On success, the paper size object is owned by the caller and should
+     * be destroyed when no longer needed.
+     *
+     * @param fullPrinterName  Fully qualified name, e.g., "CUPS/myprinter"
+     * @param printerName      Stripped name, e.g., "myprinter"
+     * @param aPaper           If NS_OK is returned, this will be filled
+     *                         in with a pointer to a paper size object.
+     * @return NS_OK or a suitable error value.
+     */
+    static nsresult CreatePaper(const char* fullPrinterName,
+				const char* printerName,
+				nsIPaperSizePS* &aPaper);
+};
+
+
+#endif /* nsPaperFactoryPS_h__ */
--- gfx/src/psshared/nsPaperPS.h
+++ gfx/src/psshared/nsPaperPS.h
@@ -40,9 +40,9 @@
 #ifndef _PAPERPS_H_
 #define _PAPERPS_H_
 
-#include "prtypes.h"
+#include "nsIPaperPS.h"
 #include "nsDebug.h"
-#include "psSharedCore.h"
+#include "nsCUPSShim.h"
 
 struct nsPaperSizePS_ {
     const char *name;
@@ -51,13 +51,13 @@
     PRBool isMetric;        // Present to the user in metric, if possible
 };
 
-class NS_PSSHARED nsPaperSizePS {
+class NS_PSSHARED nsPaperSizePS : public nsIPaperSizePS {
     public:
         /** ---------------------------------------------------
          * Constructor
          */
-        nsPaperSizePS() { mCurrent = 0; }
-
+        nsPaperSizePS();
+        
         /** ---------------------------------------------------
          * @return PR_TRUE if the cursor points past the last item.
          */
@@ -85,6 +85,12 @@
         PRBool Find(const char *aName);
 
         /** ---------------------------------------------------
+         * Position the cursor at the beginning of the paper size list.
+         * @return PR_TRUE
+         */
+        PRBool FindDefault() { mCurrent = 0; return PR_TRUE; }
+        
+        /** ---------------------------------------------------
          * @return a pointer to the name of the current paper size
          */
         const char *Name() {
@@ -117,11 +123,83 @@
             return mList[mCurrent].isMetric;
         }
 
-    private:
+    protected:
         unsigned int mCurrent;
         // the class visibility should export these, but it doesn't
         static NS_PSSHARED_STATIC_MEMBER_(const nsPaperSizePS_) mList[];
-        static NS_PSSHARED_STATIC_MEMBER_(const unsigned int) mCount;
+        unsigned int mCount;
+};
+
+class NS_PSSHARED nsPaperSizeCUPS : public nsPaperSizePS {
+    public:
+        /** ---------------------------------------------------
+         * Constructor for a specific CUPS printer.
+         * @param fullPrinterName  Fully qualified name, e.g., "CUPS/myprinter"
+         * @param printerName      Stripped name, e.g., "myprinter"
+         */
+        nsPaperSizeCUPS(const char* fullPrinterName, const char* printerName);
+        
+        /** ---------------------------------------------------
+         * Destructor.
+         */
+        ~nsPaperSizeCUPS();
+        
+        /** ---------------------------------------------------
+         * Position the cursor at the beginning of the paper size list.
+         * @return VOID
+         */
+        void First() {
+            nsPaperSizePS::First();
+            SkipZeroSizes();
+        }
+
+        /** ---------------------------------------------------
+         * Advance the cursor to the next item.
+         * @return VOID
+         */
+        void Next() {
+            nsPaperSizePS::Next();
+            SkipZeroSizes();
+        }
+
+        /** ---------------------------------------------------
+         * Point the cursor to the entry with the given paper name.
+         * @return PR_TRUE if pointing to a valid entry.
+         */
+        PRBool Find(const char *aName);
+
+        /** ---------------------------------------------------
+         * Point the cursor to the CUPS default entry for paper size.
+         * @return PR_TRUE if pointing to a valid entry.
+         */
+        PRBool FindDefault();
+        
+        /** ---------------------------------------------------
+         * @return a pointer to the name of the current paper size
+         */
+        const char *Name();
+
+        /** ---------------------------------------------------
+         * @return the width of the page in millimeters
+         */
+        float Width_mm();
+
+        /** ---------------------------------------------------
+         * @return the height of the page in millimeters
+         */
+        float Height_mm();
+
+        /** ---------------------------------------------------
+         * @return PR_TRUE if the paper should be presented to
+         *                 the user in metric units.
+         */
+        PRBool IsMetric();
+        
+    private:
+        void SkipZeroSizes();
+        PRBool mUsingCups;
+        static NS_PSSHARED_STATIC_MEMBER_(nsCUPSShim) mCups;
+        ppd_file_t* mPPD;
 };
 
 #endif
--- gfx/src/xlib/nsDeviceContextSpecXlib.cpp
+++ gfx/src/xlib/nsDeviceContextSpecXlib.cpp
@@ -1212,7 +1212,11 @@
 #endif /* SET_PRINTER_FEATURES_VIA_PREFS */
     nsXPIDLCString papername;
     if (NS_SUCCEEDED(CopyPrinterCharPref(pPrefs, "postscript", printerName, "paper_size", getter_Copies(papername)))) {
-      nsPaperSizePS paper;
+      nsIPaperSizePS* paper;
+      nsresult rv;
+      rv = nsPaperFactoryPS::CreatePaper
+        (fullPrinterName.get(), printerName.get(), paper);
+      if (NS_FAILED(rv)) return rv;
 
       if (paper.Find(papername)) {
         DO_PR_DEBUG_LOG(("setting default paper size to '%s' (%g mm/%g mm)\n",
@@ -1238,6 +1242,7 @@
       }
       printerFeatures.SetNumPaperSizeRecords(count);
 #endif /* SET_PRINTER_FEATURES_VIA_PREFS */
+      delete(paper);
     }
 
     PRBool hasSpoolerCmd = (nsPSPrinterList::kTypePS ==
Index: gfx/src/psshared/nsPaperPS.cpp
===================================================================
RCS file: /cvsroot/mozilla/gfx/src/psshared/nsPaperPS.cpp,v
retrieving revision 1.1.20.1
diff -u -p -6 -r1.1.20.1 nsPaperPS.cpp
--- gfx/src/psshared/nsPaperPS.cpp	3 Dec 2006 17:59:29 -0000	1.1.20.1
+++ gfx/src/psshared/nsPaperPS.cpp	31 Oct 2007 14:28:58 -0000
@@ -19,12 +19,14 @@
  * The Initial Developer of the Original Code is
  * Kenneth Herron <kherron@newsguy.com>.
  * Portions created by the Initial Developer are Copyright (C) 2004
  * the Initial Developer. All Rights Reserved.
  *
  * Contributor(s):
+ *   Arne John Glenstrup <panic@itu.dk>
+ *   Wolfgang Rosenauer <wr@rosenauer.org>
  *
  * Alternatively, the contents of this file may be used under the terms of
  * either the GNU General Public License Version 2 or later (the "GPL"), or
  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
  * in which case the provisions of the GPL or the LGPL are applicable instead
  * of those above. If you wish to allow use of your version of this file only
@@ -34,15 +36,32 @@
  * and other provisions required by the GPL or the LGPL. If you do not delete
  * the provisions above, a recipient may use your version of this file under
  * the terms of any one of the MPL, the GPL or the LGPL.
  *
  * ***** END LICENSE BLOCK ***** */
 
- 
+#ifdef MOZ_LOGGING
+#define FORCE_PR_LOG 1 /* Allow logging in the release build */
+#endif /* MOZ_LOGGING */
+#include "prlog.h"
+#include "prio.h"
+
 #include "nsPaperPS.h"
 #include "plstr.h"
+#include "nsPSPrinters.h"
+#include <math.h> 
+
+#ifdef PR_LOGGING 
+static PRLogModuleInfo *PaperSizePSLM = PR_NewLogModule("PaperSizePS");
+#endif /* PR_LOGGING */
+/* Macro to make lines shorter */
+#define DO_PR_DEBUG_LOG(x) PR_LOG(PaperSizePSLM, PR_LOG_DEBUG, x)
+
+#define MM_PER_PT (25.4 / 72.0)
+#define HALF_INCH_PT 36.0
+#define EPSILON 0.125
 
 #define COUNTOF(x) (sizeof(x) / sizeof((x)[0]))
 
 const nsPaperSizePS_ nsPaperSizePS::mList[] =
 {
 #define SIZE_MM(x)      (x)
@@ -55,19 +74,153 @@ const nsPaperSizePS_ nsPaperSizePS::mLis
     { "Tabloid",        SIZE_INCH(11),  SIZE_INCH(17),  PR_FALSE },
     { "Executive",      SIZE_INCH(7.5), SIZE_INCH(10),  PR_FALSE },
 #undef SIZE_INCH
 #undef SIZE_MM
 };
 
-const unsigned int nsPaperSizePS::mCount = COUNTOF(mList);
+nsCUPSShim nsPaperSizeCUPS::mCups;
+
+/* ~nsIPaperSizePS() is virtual, so must implement a destructor. */
+//nsIPaperSizePS::~nsIPaperSizePS () { }
+
+nsPaperSizePS::nsPaperSizePS() {
+    mCount = COUNTOF(mList);
+    mCurrent = 0;
+}
 
 PRBool
 nsPaperSizePS::Find(const char *aName)
 {
     for (int i = mCount; i--; ) {
         if (!PL_strcasecmp(aName, mList[i].name)) {
             mCurrent = i;
             return PR_TRUE;
         }
     }
     return PR_FALSE;
 }
+
+nsPaperSizeCUPS::nsPaperSizeCUPS(const char* fullPrinterName,
+                                 const char* printerName) {
+    DO_PR_DEBUG_LOG(("nsPaperSizeCUPS::nsPaperSizeCUPS('%s', '%s')\n",
+                     fullPrinterName, printerName));
+    /* Don't use CUPS before we are sure we have access to the PPD */
+    mUsingCups = false;
+    mPPD = nsnull;
+    mCount = COUNTOF(mList);
+    mCurrent = 0;
+    if (!fullPrinterName || !printerName ||
+        nsPSPrinterList::kTypeCUPS !=
+        nsPSPrinterList::GetPrinterType(nsDependentCString(fullPrinterName))) 
+        return;
+    if (!mCups.IsInitialized()) { mCups.Init(); }
+    if (!mCups.IsInitialized()) {
+        DO_PR_DEBUG_LOG(("nsPaperSizeCUPS::nsPaperSizeCUPS: CUPS unavailable\n"));
+        return;
+    }
+    const char* ppdFileName = mCups.mCupsGetPPD(printerName);
+    if (!ppdFileName) {
+        DO_PR_DEBUG_LOG(("nsPaperSizeCUPS::nsPaperSizeCUPS: "
+                         "cannot get PPD file name for printer '%s'\n",
+                         printerName));
+        return;
+    }
+    mPPD = mCups.mPpdOpenFile(ppdFileName);
+    // Remove the PPD file returned (it is a temporary file)
+    // as soon as we've opened it
+    if (ppdFileName) PR_Delete(ppdFileName);
+
+    if (!mPPD)  {
+        DO_PR_DEBUG_LOG(("nsPaperSizeCUPS::nsPaperSizeCUPS: "
+                         "cannot open PPD file '%s'\n",
+                         ppdFileName));
+        return;
+    }
+    mCount = mPPD->num_sizes;
+    mUsingCups = true;
+}
+
+nsPaperSizeCUPS::~nsPaperSizeCUPS() {
+    if (mPPD)  mCups.mPpdClose(mPPD);
+}
+
+void
+nsPaperSizeCUPS::SkipZeroSizes() {
+    if (!mUsingCups) return; 
+    while (mCurrent < mCount
+           && (mPPD->sizes[mCurrent].width == 0.0f || 
+               mPPD->sizes[mCurrent].length == 0.0f)) {
+        mCurrent++;
+    }
+}
+
+PRBool
+nsPaperSizeCUPS::Find(const char* aName) {
+    DO_PR_DEBUG_LOG(("nsPaperSizeCUPS::Find ('%s') ", aName));
+    if (!mUsingCups) return nsPaperSizePS::Find(aName);
+    for (int i = mCount; i--; ) {
+        if (!PL_strcasecmp(aName, mPPD->sizes[i].name)) {
+            DO_PR_DEBUG_LOG
+                (("found paper '%s' (%gx%gmm)\n",
+                  aName,
+                  round(mPPD->sizes[i].width * MM_PER_PT),
+                  round(mPPD->sizes[i].length * MM_PER_PT)));
+            mCurrent = i;
+            return PR_TRUE;
+        }
+    }
+    DO_PR_DEBUG_LOG(("did not find paper '%s'\n", aName));
+    return PR_FALSE;
+}
+
+PRBool
+nsPaperSizeCUPS::FindDefault() {
+    DO_PR_DEBUG_LOG(("nsPaperSizeCUPS::FindDefault"));
+    if (!mUsingCups) return nsPaperSizePS::FindDefault();
+    mCups.mPpdMarkDefaults(mPPD);
+    for (int i = mCount; i--; ) {
+        if (mCups.mPpdIsMarked(mPPD, "PageSize", mPPD->sizes[i].name )) {
+            DO_PR_DEBUG_LOG
+                (("found default paper '%s' (%gx%gmm)\n",
+                  mPPD->sizes[i].name,
+                  round(mPPD->sizes[i].width * MM_PER_PT),
+                  round(mPPD->sizes[i].length * MM_PER_PT)));
+            mCurrent = i;
+            return PR_TRUE;
+        }
+    }
+    mCurrent = 0;
+    DO_PR_DEBUG_LOG(("no default paper found, therefore set the first\n"));
+    return PR_TRUE;
+}
+
+const char*
+nsPaperSizeCUPS::Name() {
+    if (!mUsingCups) return nsPaperSizePS::Name();
+    NS_PRECONDITION(!AtEnd(), "Invalid current item");
+    return mPPD->sizes[mCurrent].name;
+}
+
+float
+nsPaperSizeCUPS::Width_mm() {
+    if (!mUsingCups) return nsPaperSizePS::Width_mm();
+    NS_PRECONDITION(!AtEnd(), "Invalid current item");
+    return round(mPPD->sizes[mCurrent].width * MM_PER_PT);
+}
+
+float
+nsPaperSizeCUPS::Height_mm() {
+    if (!mUsingCups) return nsPaperSizePS::Height_mm();
+    NS_PRECONDITION(!AtEnd(), "Invalid current item");
+    return round(mPPD->sizes[mCurrent].length * MM_PER_PT);
+}
+
+PRBool 
+nsPaperSizeCUPS::IsMetric() {
+    if (!mUsingCups) return nsPaperSizePS::IsMetric();
+    NS_PRECONDITION(!AtEnd(), "Invalid current item");
+    /* Educated guess: unless sizes are integral number    */
+    /* of half inches, present them to the user in metric. */
+    return
+        fabs(fmod(mPPD->sizes[mCurrent].width, HALF_INCH_PT)) > EPSILON ||
+        fabs(fmod(mPPD->sizes[mCurrent].length, HALF_INCH_PT)) > EPSILON;
+}