File iscsi-initiator-utils-use-var-for-config.patch of Package iscsi-initiator-utils

diff -aurp open-iscsi-2.0-868-test1/doc/iscsiadm.8 open-iscsi-2.0-868-test1.tmp/doc/iscsiadm.8
--- open-iscsi-2.0-868-test1/doc/iscsiadm.8	2008-01-03 14:07:04.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/doc/iscsiadm.8	2008-01-03 14:08:44.000000000 -0600
@@ -47,7 +47,7 @@ display help text and exit
 .TP
 \fB\-I\fR, \fB\-\-interface\fI[iface]\fR
 The interface argument specifies the iSCSI interface to use for the operation.
-iSCSI interfaces (iface) are defined in /etc/iscsi/ifaces. For hardware
+iSCSI interfaces (iface) are defined in /var/lib/iscsi/ifaces. For hardware
 or offload, the iface config must have the hardware address (iface.hwaddress)
 and the driver/transport_name (iface.transport_name). The iface's name is
 then the filename of the iface config. For software iSCSI, the iface config
@@ -310,10 +310,10 @@ The configuration file read by \fBiscsid
 The file containing the iSCSI InitiatorName and InitiatorAlias read by
 \fBiscsid\fR and \fBiscsiadm\fR on startup.
 .TP
-/etc/iscsi/nodes/
+/var/lib/iscsi/nodes/
 This directory contains the nodes with their targets.
 .TP
-/etc/iscsi/send_targets
+/var/lib/iscsi/send_targets
 This directory contains the portals.
 
 .SH "SEE ALSO"
diff -aurp open-iscsi-2.0-868-test1/README open-iscsi-2.0-868-test1.tmp/README
--- open-iscsi-2.0-868-test1/README	2008-01-03 14:07:04.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/README	2008-01-03 14:05:35.000000000 -0600
@@ -138,10 +138,10 @@ available on all Linux installations.
 
 The database contains two tables:
 
-- Discovery table (/etc/iscsi/send_targets);
-- Node table (/etc/iscsi/nodes).
+- Discovery table (/var/lib/iscsi/send_targets);
+- Node table (/var/lib/iscsi/nodes).
 
-The regular place for iSCSI database files: /etc/iscsi/nodes
+The regular place for iSCSI database files: /var/lib/iscsi/nodes
 
 The iscsiadm utility is a command-line tool to manage (update, delete,
 insert, query) the persistent database.
@@ -288,7 +288,7 @@ a scsi_host per HBA port).
 To manage both types of initiator stacks, iscsiadm uses the interface (iface)
 structure. For each HBA port or for software iscsi for each network
 device (ethX) or NIC, that you wish to bind sessions to you must create
-a iface config /etc/iscsi/ifaces.
+a iface config /var/lib/iscsi/ifaces.
 
 When you run iscsiadm the first time a hardware iscsi driver like qla4xxx is
 loaded, iscsiadm will create default iface configs for you. The config created
@@ -301,29 +301,29 @@ Running:
 iface0 qla4xxx,00:c0:dd:08:63:e8,default
 iface1 qla4xxx,00:c0:dd:08:63:ea,default
 
-Will report iface configurations that are setup in /etc/iscsi/ifaces.
+Will report iface configurations that are setup in /var/lib/iscsi/ifaces.
 The format is:
 
 iface_name transport_name,hwaddress,net_ifacename
 
 For software iscsi, you can create the iface configs by hand, but it is
 reccomended that you use iscsiadm's iface mode. There is a iface.example in
-/etc/iscsi/ifaces which can be used as a template for the daring.
+/var/lib/iscsi/ifaces which can be used as a template for the daring.
 
 For each network object you wish to bind a session to you must create
-a seperate iface config in /etc/iscsi/ifaces and each iface config file
+a seperate iface config in /var/lib/iscsi/ifaces and each iface config file
 must have a unique name which is less than or equal to 64 characters.
 
 Example:
 
 If you have NIC1 with MAC address 00:0F:1F:92:6B:BF and NIC2 with
 MAC address 00:C0:DD:08:63:E7 and you wanted to do software iscsi over
-TCP/IP. Then in /etc/iscsi/ifaces/iface0 you would enter:
+TCP/IP. Then in /var/lib/iscsi/ifaces/iface0 you would enter:
 
 iface.transport_name = tcp
 iface.hwaddress = 00:0F:1F:92:6B:BF
 
-and in /etc/iscsi/ifaces/iface1 you would enter:
+and in /var/lib/iscsi/ifaces/iface1 you would enter:
 
 iface.transport_name = tcp
 iface.hwaddress = 00:C0:DD:08:63:E7
@@ -347,7 +347,7 @@ but you have not logged in then, iscsiad
 all existing bindings.
 
 When you then run iscsiadm to do discovery, it will check for interfaces
-in /etc/iscsi/ifaces and bind the portals that are discovered so that
+in /var/lib/iscsi/ifaces and bind the portals that are discovered so that
 they will be logged in through each iface. This behavior can also be overriden
 by passing in the interfaces you want to use. For example if you had defined
 two interface but only wanted to use one you can use the
@@ -361,7 +361,7 @@ we do not bind a session to a iface, the
 
 iscsiadm -m discovery -t st -p ip:port -I default -P 1
 
-And if you did not define any interfaces in /etc/iscsi/ifaces and do
+And if you did not define any interfaces in /var/lib/iscsi/ifaces and do
 not pass anything into iscsiadm, running iscsiadm will do the default
 behavior, where we allow the network subsystem to decide which
 device to use.
@@ -396,13 +396,13 @@ iscsiadm -m node -p ip:port -I iface0 --
 
 	    ./iscsiadm -m discovery -t sendtargets -p 192.168.1.1:3260
 
-	This will first search /etc/iscsi/ifaces for interfaces
+	This will first search /var/lib/iscsi/ifaces for interfaces
 	using software iscsi. If any are found then nodes found during
 	discovery will be setup so that they can logged in through
 	those interfaces.
 
     - SendTargets iSCSI Discovery with a specific interface. If you
-	wish to only use a subset of the interfaces in /etc/iscsi/ifaces
+	wish to only use a subset of the interfaces in /var/lib/iscsi/ifaces
 	then you can pass them in during discovery:
 
 	     ./iscsiadm -m discovery -t sendtargets -p 192.168.1.1:3260 \
diff -aurp open-iscsi-2.0-868-test1/usr/idbm.c open-iscsi-2.0-868-test1.tmp/usr/idbm.c
--- open-iscsi-2.0-868-test1/usr/idbm.c	2008-01-03 14:07:04.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/usr/idbm.c	2008-01-03 14:03:36.000000000 -0600
@@ -2582,9 +2582,9 @@ idbm_init(idbm_get_config_file_fn *fn)
 	idbm_t *db;
 
 	/* make sure root db dir is there */
-	if (access(ISCSI_CONFIG_ROOT, F_OK) != 0) {
-		if (mkdir(ISCSI_CONFIG_ROOT, 0660) != 0) {
-			log_error("Could not make %s %d\n", ISCSI_CONFIG_ROOT,
+	if (access(ISCSIVAR, F_OK) != 0) {
+		if (mkdir(ISCSIVAR, 0660) != 0) {
+			log_error("Could not make %s %d\n", ISCSIVAR,
 				   errno);
 			return NULL;
 		}
Only in open-iscsi-2.0-868-test1.tmp/usr: idbm.c.orig
diff -aurp open-iscsi-2.0-868-test1/usr/idbm.h open-iscsi-2.0-868-test1.tmp/usr/idbm.h
--- open-iscsi-2.0-868-test1/usr/idbm.h	2008-01-03 13:23:36.000000000 -0600
+++ open-iscsi-2.0-868-test1.tmp/usr/idbm.h	2008-01-03 14:03:36.000000000 -0600
@@ -26,12 +26,14 @@
 #include "initiator.h"
 #include "config.h"
 
-#define NODE_CONFIG_DIR		ISCSI_CONFIG_ROOT"nodes"
-#define IFACE_CONFIG_DIR	ISCSI_CONFIG_ROOT"ifaces"
-#define SLP_CONFIG_DIR		ISCSI_CONFIG_ROOT"slp"
-#define ISNS_CONFIG_DIR		ISCSI_CONFIG_ROOT"isns"
-#define STATIC_CONFIG_DIR	ISCSI_CONFIG_ROOT"static"
-#define ST_CONFIG_DIR		ISCSI_CONFIG_ROOT"send_targets"
+#define ISCSIVAR		"/var/lib/iscsi/"
+
+#define NODE_CONFIG_DIR		ISCSIVAR"nodes"
+#define IFACE_CONFIG_DIR	ISCSIVAR"ifaces"
+#define SLP_CONFIG_DIR		ISCSIVAR"slp"
+#define ISNS_CONFIG_DIR		ISCSIVAR"isns"
+#define STATIC_CONFIG_DIR	ISCSIVAR"static"
+#define ST_CONFIG_DIR		ISCSIVAR"send_targets"
 #define ST_CONFIG_NAME		"st_config"
 
 #define TYPE_INT	0