|
[-]
[+]
|
Added |
softflowd.changes
|
|
|
|
[-]
[+]
|
Changed |
softflowd.spec
^
|
|
|
|
[-]
[+]
|
Changed |
softflowd-chroot.patch
^
|
| @@ -1,11 +1,11 @@
---- softflowd.h.orig 2009-05-02 22:29:45.000000000 +0200
-+++ softflowd.h 2009-05-02 22:30:03.000000000 +0200
-@@ -34,7 +34,7 @@
- # define PRIVDROP_USER "nobody"
+--- softflowd.h.orig 2012-02-13 02:39:42.000000000 +0100
++++ softflowd.h 2012-12-13 13:03:50.932039193 +0100
+@@ -36,7 +36,7 @@
#endif
--#define PRIVDROP_CHROOT_DIR "/var/empty"
-+#define PRIVDROP_CHROOT_DIR "/var/lib/softflowd"
-
+ #ifndef PRIVDROP_CHROOT_DIR
+-# define PRIVDROP_CHROOT_DIR "/var/empty"
++# define PRIVDROP_CHROOT_DIR "/var/lib/softflowd"
+ #endif
/*
* Capture length for libpcap: Must fit the link layer header, plus
|
|
[-]
[+]
|
Deleted |
softflowd-0.9.8.tar.gz/ChangeLog
^
|
| @@ -1,238 +0,0 @@
-20061101
- - (djm) Collect licenses into LICENSE file
- - (djm) malloc(x*y) -> calloc(x, y)
- - (djm) Sync sys-tree.h
- - (djm) Release 0.9.8
-
-20060315
- - (djm) Add "send-template" softflowctl command to resend a NetFlow 9
- template record immediately
-
-20060315
- - (djm) Fix DLT_RAW support, from jhanna AT shaw.ca
- - (djm) Support ${DESTDIR} in Makefile install target, from
- ssnodgra AT pheran.com
- - (djm) Encode ICMP type and code into port numbers (apparently this is
- what Cisco exporters do), patch from ssnodgra AT pheran.com slightly
- tweaked by me
- - (djm) Crank version number to 0.9.8
- - (djm) Add RPM packaging files from ssnodgra AT pheran.com
-
-20060214
- - (djm) Add missing getopt() bit for flowtrack mode
-
-20060211
- - (djm) Add option to ignore port and protocol information from flows,
- allowing flows from the same IP addresses to be automatically
- coalesced
-
-20060126
- - (djm) Correctly expire quiescent flows when they hit maximum_lifetime;
- bug noticed and patch tested by andreas.brillisauer AT hetzner.de
-
-20051206
- - (djm) Make sure installation directories exist, spotted by
- alshu AT tut.by
-
-20051118
- - (djm) Some extra paranoia and verbosity on malloc failures
- - (djm) Support Linux "cooked socket" datalink type, from Tony Lewis
- gnutered AT yahoo.com.au
-
-20051001
- - (djm) Fix typo, from rbreathe AT brookes.ac.uk
-
-20050505
- - (djm) Fix time printing bug in debug mode
- - (djm) Fix reversed NetFlow v.9 first_switched and last_switched times
-
-20050505
- - (djm) Fix bug in sequence number generation. Reported by
- b.ghita AT jack.see.plymouth.ac.uk and mwlucas AT blackhelicopters.org
- - (djm) Report pcap stats in statistics display
-
-20050114
- - (djm) Release 0.9.7
-
-20050110
- - (djm) Fix endianness problem in NetFlow v.9 port number export. Found and
- fixed by paolo.lucente AT ic.cnr.it
- - (djm) Add option to set hoplimit/TTL in support of multicast export support
- - (djm) Document multicast export
-
-20041109
- - (djm) Test for struct ip6_ext in autoconf and define a replacement if
- missing, some systems lack it
-
-20040930
- - (djm) Increase caplen a little for IPv6
- - (djm) Remove unused debugging code from NetFlow v.9 support
- - (djm) Add a timeout to cluster expiry expiry events, so we get more flows
- per packet. Default is to check for expiries every 60s
- - (djm) Allow timouts to be disabled (by setting them to 0)
- - (djm) Include IP_PROTOCOL_VERSION field in NetFlow v.9 packets
- - (djm) Don't bother tracking IPv6 flows if NetFlow export version
- doesn't support it
- - (djm) Don't crank up pcap snaplen unless we are interested in IPv6 either
- - (djm) Unbreak v6 flow export
- - (djm) Unbreak compilation on non-OpenBSD
- - (djm) Update README with recent changes (NetFlow v.9, v6 flows)
- - (djm) Release 0.9.6
-
-20040929
- - (djm) Improve IPv6 code: track flowlables bidirectionally (but don't key on
- them for now), print addresses:port tuples unambiguously and apply correct
- timeout for ICMPv6 flows
- - (djm) Remove NetFlow v.1 types from NetFlow v.5 code
- - (djm) NetFlow v.9 support
-
-20040913
- - (djm) Split out netflow send functions into separate files
- - (djm) Switch to a table of netflow exporter functions in preparation for
- additional export protocols
- - (djm) Collect netflow export target information together in a struct, in
- preparation for more export protocols and support for multiple export targets
- - (djm) Optimise the datalink_check function, by caching the last datalink type
- used.
-
-20040909
- - (djm) Implement IPv6 flow tracking. Currently no export functionality.
- - (djm) Portability fixes for Linux, add closefrom()
- - (djm) Use strlcat/strlcpy instead of strn* functions
- - (djm) Comment out dump_packet (uncomment when debugging)
-
-20040909
- - (djm) inline is unnecessary
- - (djm) Rework datalink processing, in preparation of IPv6 support
- - (djm) Next step in preparation of IPv6 support: make flow structure and
- lookup function support both IPv4 and IPv6 addresses (v6 addrs aren't yet
- used)
- - (djm) Another step on the road: factor out transport-layer protocol parsing
- from IPv4 parsing code
- - (djm) Be more careful about putting flows into canonical format
- - (djm) Prepare for IPv6 packet to flow conversion routine
-
-20040901
- - (djm) Fix a tiny, stupid bug that prevents flow export
- - (djm) Release version 0.9.2
-
-20040827
- - (djm) NetFlow v.5 supports 30 flows per packet
- - (djm) Use struct sockaddr in arguments (not sockaddr_storage), properly
- check length
- - (djm) Mention NetFlow v.5 support in manpage
- - (djm) Release version 0.9.1
-
-20040716
- - (djm) Fix collector.pl when no address family specified on commandline
- spotted by pgennai AT netstarnetworks.com
-
-20040710
- - (djm) Tidy up code: remove some debugging gunk, kill a global
- - (djm) Add support for NetFlow v.5 export format to softflowd
- - (djm) Add support for NetFlow v.5 export format to collector.pl
-
-20040430
- - (djm) Release version 0.9
-
-20040417
- - (djm) Fix invalid packet bug
-
-20040417
- - (djm) Eliminate periodic expiry scans, wait in poll() only until the next
- scheduled expiry event
- - (djm) Separate timeout for ICMP traffic, generic timeout is too long
-
-20040416
- - (djm) A bunch of changes necessary to support building on Solaris 9 (though
- the resultant binary doesn't seem to work properly):
- - Use getaddrinfo instead of inet_aton to parse host/port for export
- - Use setreuid if setresuid isn't around (ditto for gid)
- - Add replacement daemon() function from OpenBSD
- - Provide our own logit() function, because Solaris syslog() doesn't
- support LOG_PERROR
- - A heap of configure and common.h additions and fixes
- - (djm) Fix busted preprocessor
- - (djm) Support "[host]:port" syntax to specify numeric IPv6 export target
- - (djm) Fix connect() for IPv6 export targets
- - (djm) IPv6 listen support for collector.pl
- - (djm) Allow v4 operation of collector.pl if v6 modules aren't present
- - (djm) More flow export fixes
- - (djm) Tidy manpage and mention v6 export syntax
- - (djm) Unbreak Solaris, pass socklen around instead of using sa_len
- - (djm) Unbreak "make install"
-
-20040415
- - (djm) Clear socket errors before UDP send; from pfflowd
- - (djm) Print flow start and finish times in collector.pl
- - (djm) Linux needs grp.h for setgroups()
- - (djm) Never endprotoent()
- - (djm) Use autoconf to detect various things; in preparation of more
- portability
- - (djm) Detect int and define standard int types in configure
-
-20031111
- - (djm) Remove -Werror from CFLAGS, it causes problems in released software
-
-20031109
- - (djm) Give compile-time choice over flow and expiry event tree type
- default is splay tree for flows and red-black tree for expiry events
- (limited benchmarking indicates that this is the fastest)
- - (djm) Lock the BPF device to prevent changes should the unpriv child
- be compromised (only OpenBSD supports this ioctl for now)
-
-20031001
- - (djm) Realloc audit
- - (djm) Chroot to /var/empty and drop privileges on daemonisation
- - (djm) More things TODO
-
-20030620
- - (djm) Fixup collector timestamp printing
- - (djm) Rework TODO, add section on planned fragment handling
- - (djm) Add "strip" target to Makefile
- - (djm) Add "help" keyword to recognised softflowctl responses
- - (djm) Fix fragment handling bug: we would try to look into fragmented
- payload on later fragments. This could cause random tcp/udp port numbers
- to be recorded.
- - (djm) Fix malicious fragment handling bug: deliberately tiny fragments
- (e.g. http://citeseer.nj.nec.com/ptacek98insertion.html) would be ignored
- and would not create flow entries.
- - (djm) Count fragments that we have seen
- - (djm) Release version 0.8.1
-
-20030307
- - (djm) Add basic perl netflow collector
-
-20021110
- - (djm) Refactor, dramatically shrink mainloop
-
-20021105
- - (djm) Don't exit on failure to lookup net/mask. From Alejandro Roman
- <aroman@uyr.com.ar>
-
-20021031
- - (djm) Add some examples to the manpage
-
-20021030
- - (djm) New user-friendly time specification code from OpenSSH/Kevin Steves
- - (djm) Always use local sys-tree.h (for older OpenBSD's)
-
-20021029
- - (djm) Multiple fixes and improvements from Octavian Cerna <tavy@ylabs.com>
- - softflowd.c (connsock): Fix arguments to `connect': addr is a pointer,
- not a structure.
- (flow_update_expiry): Properly compute the flow lifetime.
- (send_netflow_v1): Count the leftover packet.
- Send flow_start, flow_finish and uptime_ms as Cisco equipment
- does: milliseconds since system boot.
- (timeval_sub_ms): New function.
- (main): Changed POLL_WAIT to be (EXPIRY_WAIT/2) as stated in the
- comment above `poll': twice per recheck.
- `poll' takes the last argument in milliseconds.
- Initialize system_boot_time as the time at the start of capture
- (fixme: how does this affect reading from capture files?)
-
-20021024
- - (djm) Release softflowd-0.7.1
-
-$Id: ChangeLog,v 1.87 2006/11/02 06:36:16 djm Exp $
|
|
[-]
[+]
|
Added |
softflowd-0.9.9.tar.bz2/.hg_archival.txt
^
|
| @@ -0,0 +1,4 @@
+repo: a471267f42340e3926cc0d68c98ec64789cffcca
+node: c496d4d4934828f6b62ff38e1702891f75710b0a
+branch: default
+tag: softflowd-0.9.9
|
|
[-]
[+]
|
Added |
softflowd-0.9.9.tar.bz2/.hgtags
^
|
| @@ -0,0 +1,19 @@
+0e7b1c83c22d691f0c2dc6a964d1334250f9be95 PRE_EXPIRY_RB_CONVERT
+0f4d543cfadd3f34162eb5e2785c057c548cfd22 SOFTFLOWD_0_3
+4680effcb255c612bc63f0ddedbea72f92151b59 SOFTFLOWD_0_9
+51c8e6737def4f6dd6de2692c98a8fda0d646a54 SOFTFLOWD_0_6
+7e447d5b8c8a7430bfaa234b45a06045b4ec04ba SOFTFLOWD_0_1
+7eaa764bbb3dbf71d5b329e61aed810bf7107f4a SOFTFLOWD_0_9_2
+8779cbdad42aaf29f981e2f9a7b617df8d2ac090 START
+9a9e2cd7e3b5dd05b63927acad9d0ca9bf39ce26 SOFTFLOWD_0_9_7
+9dae7a93ec5a71f921ea9ab8a46ad43942d28fc3 SOFTFLOWD_0_8
+b0c4bca0d46803f21e656a8c486e8a6ccb4fa676 SOFTFLOWD_0_2
+b7c24dd071091cbc74391e02799205c081edf8f1 SOFTFLOWD_0_8_1
+bcbc1910e8a68a3351d3bad37ca55558ff66d17c BEFORE_TREE_CHANGES
+bf9ccfda73346e315d37415d32a7c69653d4a245 SOFTFLOWD_0_5
+c025775ad959e68161ce6cf18a9ce9ffe35a92aa SOFTFLOWD_0_9_1
+ca5de0007bccbf42748d02630db01bb8a8961a92 SOFTFLOWD_0_7
+de48250d22aa20026d89fc715fff3bd27dcb0db1 PRE_BIDI
+eb6dc8d8b9c3166594cfa4bf5fd2c73c4a131820 SOFTFLOWD_0_7_1
+f81d538391377dc23346ddda4bd2fb0520daf6ea SOFTFLOWD_0_9_6
+ffda749c4623fcc78ea4a7ead6da6eeca64188aa SOFTFLOWD_0_9_8
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/Makefile.in
^
|
| @@ -1,5 +1,3 @@
-# $Id: Makefile.in,v 1.9 2006/03/14 22:55:41 djm Exp $
-
prefix=@prefix@
exec_prefix=@exec_prefix@
bindir=@bindir@
@@ -27,11 +25,12 @@
TARGETS=softflowd${EXEEXT} softflowctl${EXEEXT}
COMMON=convtime.o strlcpy.o strlcat.o closefrom.o daemon.o
+SOFTFLOWD=softflowd.o log.o netflow1.o netflow5.o netflow9.o freelist.o
all: $(TARGETS)
-softflowd${EXEEXT}: log.o softflowd.o netflow1.o netflow5.o netflow9.o $(COMMON)
- $(CC) $(LDFLAGS) -o $@ log.o netflow1.o netflow5.o netflow9.o softflowd.o $(COMMON) $(LIBS)
+softflowd${EXEEXT}: ${SOFTFLOWD} $(COMMON)
+ $(CC) $(LDFLAGS) -o $@ ${SOFTFLOWD} $(COMMON) $(LIBS)
softflowctl${EXEEXT}: softflowctl.o $(COMMON)
$(CC) $(LDFLAGS) -o $@ softflowctl.o $(COMMON) $(LIBS)
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/README
^
|
| @@ -62,6 +62,7 @@
small, that are waiting to be implemented. If you are interested in
helping, please contact me.
-Damien Miller <djm@mindrot.org>
+The latest source code may be obtained from Google Code:
+http://code.google.com/p/softflowd/
-$Id: README,v 1.7 2006/11/02 06:34:18 djm Exp $
+Damien Miller <djm@mindrot.org>
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/TODO
^
|
| @@ -6,6 +6,8 @@
- Use strtonum()
Flow tracking engine
+ - Calculate hash over flow and use it as a key to avoid lots of
+ cache-trashing comparisons
- Verify checksums (maybe. perhaps bad for accounting, good for flow tracking)
- Fragment processing
- We don't handle fragments right
@@ -59,6 +61,7 @@
- Partly done, just need to keep a list of targets instead of a single one
- Ability to directly write to file (maybe. If so, reuse flowd store code)
- NetFlow v.9 field selection
+ - Get AS numbers from bgpd and fill in to Netflow packets
Statistics code
- Collect more statistics (maybe)
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/closefrom.c
^
|
| @@ -46,8 +46,6 @@
# define OPEN_MAX 256
#endif
-RCSID("$Id: closefrom.c,v 1.1 2004/09/10 09:08:08 djm Exp $");
-
#ifndef lint
static const char rcsid[] = "$Sudo: closefrom.c,v 1.6 2004/06/01 20:51:56 millert Exp $";
#endif /* lint */
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/collector.pl
^
|
| @@ -3,7 +3,7 @@
# This is a Cisco NetFlow datagram collector
# Netflow protocol reference:
-# http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nfc/nfc_3_0/nfc_ug/nfcform.htm
+# http://www.cisco.com/en/US/products/sw/netmgtsw/ps1964/products_implementation_design_guide09186a00800d6a11.html
# XXX Doesn't support NetFlow 9
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/common.h
^
|
| @@ -73,7 +73,7 @@
#define PROGNAME "softflowd"
/* The name of the program */
-#define PROGVER "0.9.8"
+#define PROGVER "0.9.9"
/* Default pidfile */
#define DEFAULT_PIDFILE "/var/run/" PROGNAME ".pid"
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/config.h.in
^
|
| @@ -138,9 +138,15 @@
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
/* Define to the version of this package. */
#undef PACKAGE_VERSION
+/* privdrop chroot directory */
+#undef PRIVDROP_CHROOT_DIR
+
/* The size of `char', as computed by sizeof. */
#undef SIZEOF_CHAR
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/configure
^
|
| @@ -1,56 +1,83 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60.
+# Generated by GNU Autoconf 2.68.
+#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
else
- PATH_SEPARATOR=:
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
fi
- rm -f conf$$.sh
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
fi
@@ -59,20 +86,19 @@
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
-as_nl='
-'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+as_myself=
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -83,352 +109,328 @@
as_myself=$0
fi
if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
# CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
else
- as_have_required=no
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if (set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
else
- exitcode=1
- echo positional parameters were not saved.
+ as_have_required=no
fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- case $as_dir in
+ as_found=:
+ case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
done;;
esac
+ as_found=false
done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
IFS=$as_save_IFS
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
fi
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
fi
-
-
fi
-
fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-exitcode=0
-if as_func_success; then
- :
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
-if as_func_ret_success; then
- :
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
else
- exitcode=1
- echo as_func_ret_success failed.
+ as_expr=false
fi
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
fi
-if (set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
else
- exitcode=1
- echo positional parameters were not saved.
+ as_dirname=false
fi
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell autoconf@gnu.org about your system,
- echo including any error possibly output before this
- echo message
-}
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
@@ -445,8 +447,7 @@
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
@@ -456,49 +457,40 @@
exit
}
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
- mkdir conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
+ fi
else
as_ln_s='cp -p'
fi
@@ -506,25 +498,34 @@
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
else
- as_executable_p=:
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
fi
-rm -f conf$$.file
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -533,11 +534,11 @@
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-exec 7<&0 </dev/null 6>&1
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
@@ -552,7 +553,6 @@
subdirs=
MFLAGS=
MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME=
@@ -560,103 +560,115 @@
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=
+PACKAGE_URL=
ac_unique_file="softflowd.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
-#if HAVE_STDINT_H
+#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-CPP
-GREP
-EGREP
+ac_subst_vars='LTLIBOBJS
LIBOBJS
-LTLIBOBJS'
+EGREP
+GREP
+CPP
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_gcc_warnings
+with_cflags
+with_cppflags
+with_ldflags
+with_libs
+with_chrootdir
+'
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
+LIBS
CPPFLAGS
CPP'
@@ -664,6 +676,8 @@
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
@@ -719,8 +733,9 @@
fi
case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
@@ -762,13 +777,20 @@
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval enable_$ac_feature=no ;;
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
@@ -781,13 +803,20 @@
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval enable_$ac_feature=\$ac_optarg ;;
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -978,22 +1007,36 @@
ac_init_version=: ;;
-with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval with_$ac_package=\$ac_optarg ;;
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
-without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval with_$ac_package=no ;;
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
--x)
# Obsolete; use --with-x.
@@ -1013,26 +1056,26 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
@@ -1040,23 +1083,36 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
fi
-# Be sure to have absolute directory names.
+# Check all directory arguments for consistency.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1070,8 +1126,8 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1086,23 +1142,21 @@
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -1129,13 +1183,11 @@
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1175,7 +1227,7 @@
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
+ -q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
@@ -1183,9 +1235,9 @@
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
+ [$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
+ [PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
@@ -1195,25 +1247,25 @@
For better control, use the options below.
Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
@@ -1225,6 +1277,7 @@
cat <<\_ACEOF
Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-gcc-warnings Enable verbose warnings (only for gcc)
@@ -1236,19 +1289,22 @@
--with-cppflags Specify additional preprocessor flags
--with-ldflags Specify additional linker flags
--with-libs Specify additional libraries to link with
+ --with-chrootdir Specify chroot directory
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
+Report bugs to the package provider.
_ACEOF
ac_status=$?
fi
@@ -1256,15 +1312,17 @@
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" || continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -1300,7 +1358,7 @@
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
@@ -1310,6614 +1368,2912 @@
if $ac_init_version; then
cat <<\_ACEOF
configure
-generated by GNU Autoconf 2.60
+generated by GNU Autoconf 2.68
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.60. Invocation command line was
-
- $ $0 $@
-_ACEOF
-exec 5>>config.log
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+} # ac_fn_c_try_compile
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
-_ASUNAME
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-} >&5
+} # ac_fn_c_check_header_mongrel
-cat >&5 <<_ACEOF
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
-## ----------- ##
-## Core tests. ##
-## ----------- ##
+} # ac_fn_c_try_run
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+} # ac_fn_c_check_header_compile
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$4=yes"
+else
+ eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
+} # ac_fn_c_check_member
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
+#undef $2
-# Predefined preprocessor variables.
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+} # ac_fn_c_check_func
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
+} # ac_fn_c_check_type
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+ ;
+ return 0;
+}
_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
- set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
- set x "$prefix/share/config.site" "$prefix/etc/config.site"
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_hi=$ac_mid; break
else
- set x "$ac_default_prefix/share/config.site" \
- "$ac_default_prefix/etc/config.site"
+ as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
fi
-shift
-for ac_site_file
-do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_lo=$ac_mid; break
+else
+ as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_hi=$ac_mid
+else
+ as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+ else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ return 1;
+ if (($2) < 0)
+ {
+ long int i = longval ();
+ if (i != ($2))
+ return 1;
+ fprintf (f, "%ld", i);
+ }
+ else
+ {
+ unsigned long int i = ulongval ();
+ if (i != ($2))
+ return 1;
+ fprintf (f, "%lu", i);
+ }
+ /* Do not output a trailing newline, as this causes \r\n confusion
+ on some platforms. */
+ return ferror (f) || fclose (f) != 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+ ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+ fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+} # ac_fn_c_compute_int
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+It was created by $as_me, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+ $ $0 $@
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-ac_config_headers="$ac_config_headers config.h"
+_ASUNAME
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
+ $as_echo "PATH: $as_dir"
+ done
IFS=$as_save_IFS
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
+} >&5
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+cat >&5 <<_ACEOF
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
+## ----------- ##
+## Core tests. ##
+## ----------- ##
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+_ACEOF
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
- test -n "$CC" && break
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6; }
-else
- { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
- test -n "$ac_ct_CC" && break
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
+ac_signal=0
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+$as_echo "/* confdefs.h */" > confdefs.h
-# Provide some information about the compiler.
-echo "$as_me:$LINENO: checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
+# Predefined preprocessor variables.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-int
-main ()
-{
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
- ;
- return 0;
-}
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-#
-# List of possible output files, starting from the most likely.
-# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-# only as a last resort. b.out is created by i960 compilers.
-ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-#
-# The IRIX 6 linker writes into existing files which may not be
-# executable, retaining their permissions. Remove them first so a
-# subsequent execution test works.
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { (ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6; }
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-{ echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6; }
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_c89=$ac_arg
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6; } ;;
- xno)
- { echo "$as_me:$LINENO: result: unsupported" >&5
-echo "${ECHO_T}unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-# Optional verbose warnings for gcc, see below
-WFLAGS="-Wall -Waggregate-return -Wcast-align -Wcast-qual"
-WFLAGS="$WFLAGS -Wmissing-declarations -Wmissing-prototypes"
-WFLAGS="$WFLAGS -Wno-conversion -Wpointer-arith -Wshadow"
-WFLAGS="$WFLAGS -Wuninitialized -Wcast-align -Wcast-qual"
-WFLAGS="$WFLAGS -WformatC=2 -Wformat-nonliteral -Wwrite-strings"
-
-# Process flag arguments early, so they are available for tests later
-# Check whether --enable-gcc-warnings was given.
-if test "${enable_gcc_warnings+set}" = set; then
- enableval=$enable_gcc_warnings; if test "x$enableval" = "xyes" ; then CFLAGS="$CFLAGS $WFLAGS"; fi
-
-fi
-
-
-# Check whether --with-cflags was given.
-if test "${with_cflags+set}" = set; then
- withval=$with_cflags; if test "x$withval" != "xno" ; then CFLAGS="$CFLAGS $withval"; fi
-
-fi
-
-
-# Check whether --with-cppflags was given.
-if test "${with_cppflags+set}" = set; then
- withval=$with_cppflags; if test "x$withval" != "xno"; then CPPFLAGS="$CPPFLAGS $withval"; fi
-
-fi
-
-
-# Check whether --with-ldflags was given.
-if test "${with_ldflags+set}" = set; then
- withval=$with_ldflags; if test "x$withval" != "xno" ; then LDFLAGS="$LDFLAGS $withval"; fi
-
-fi
-
-
-# Check whether --with-libs was given.
-if test "${with_libs+set}" = set; then
- withval=$with_libs; if test "x$withval" != "xno" ; then LIBS="$LIBS $withval"; fi
-
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Extract the first word of "grep ggrep" to use in msg output
-if test -z "$GREP"; then
-set dummy grep ggrep; ac_prog_name=$2
-if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_GREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_GREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-GREP="$ac_cv_path_GREP"
-if test -z "$GREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_GREP=$GREP
-fi
-
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- # Extract the first word of "egrep" to use in msg output
-if test -z "$EGREP"; then
-set dummy egrep; ac_prog_name=$2
-if test "${ac_cv_path_EGREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_path_EGREP_found=false
-# Loop through the user's path and test for each of PROGNAME-LIST
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-
- $ac_path_EGREP_found && break 3
- done
-done
-
-done
-IFS=$as_save_IFS
-
-
-fi
-
-EGREP="$ac_cv_path_EGREP"
-if test -z "$EGREP"; then
- { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
-
- fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_header_stdc=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
-
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_Header=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-for ac_header in net/bpf.h pcap.h pcap-bpf.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- { echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-else
- # Is the header compilable?
-{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-
- ;;
-esac
-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval echo '${'$as_ac_Header'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-{ echo "$as_me:$LINENO: checking for struct sockaddr.sa_len" >&5
-echo $ECHO_N "checking for struct sockaddr.sa_len... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_sockaddr_sa_len+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- #include <sys/socket.h>
-
-int
-main ()
-{
-static struct sockaddr ac_aggr;
-if (ac_aggr.sa_len)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_member_struct_sockaddr_sa_len=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
- #include <sys/socket.h>
-
-int
-main ()
-{
-static struct sockaddr ac_aggr;
-if (sizeof ac_aggr.sa_len)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_member_struct_sockaddr_sa_len=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_sockaddr_sa_len=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_sockaddr_sa_len" >&5
-echo "${ECHO_T}$ac_cv_member_struct_sockaddr_sa_len" >&6; }
-if test $ac_cv_member_struct_sockaddr_sa_len = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define SOCK_HAS_LEN 1
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for struct ip6_ext.ip6e_nxt" >&5
-echo $ECHO_N "checking for struct ip6_ext.ip6e_nxt... $ECHO_C" >&6; }
-if test "${ac_cv_member_struct_ip6_ext_ip6e_nxt+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- #include <sys/types.h>
- #include <sys/socket.h>
- #include <netinet/in.h>
- #include <netinet/ip6.h>
-
-
-int
-main ()
-{
-static struct ip6_ext ac_aggr;
-if (ac_aggr.ip6e_nxt)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_member_struct_ip6_ext_ip6e_nxt=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
- #include <sys/types.h>
- #include <sys/socket.h>
- #include <netinet/in.h>
- #include <netinet/ip6.h>
-
-
-int
-main ()
-{
-static struct ip6_ext ac_aggr;
-if (sizeof ac_aggr.ip6e_nxt)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_member_struct_ip6_ext_ip6e_nxt=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_member_struct_ip6_ext_ip6e_nxt=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_ip6_ext_ip6e_nxt" >&5
-echo "${ECHO_T}$ac_cv_member_struct_ip6_ext_ip6e_nxt" >&6; }
-if test $ac_cv_member_struct_ip6_ext_ip6e_nxt = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRUCT_IP6_EXT 1
-_ACEOF
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for library containing daemon" >&5
-echo $ECHO_N "checking for library containing daemon... $ECHO_C" >&6; }
-if test "${ac_cv_search_daemon+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char daemon ();
-int
-main ()
-{
-return daemon ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' bsd; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_daemon=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_daemon+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_daemon+set}" = set; then
- :
-else
- ac_cv_search_daemon=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_daemon" >&5
-echo "${ECHO_T}$ac_cv_search_daemon" >&6; }
-ac_res=$ac_cv_search_daemon
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5
-echo $ECHO_N "checking for library containing gethostbyname... $ECHO_C" >&6; }
-if test "${ac_cv_search_gethostbyname+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' nsl; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_gethostbyname=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_gethostbyname+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_gethostbyname+set}" = set; then
- :
-else
- ac_cv_search_gethostbyname=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5
-echo "${ECHO_T}$ac_cv_search_gethostbyname" >&6; }
-ac_res=$ac_cv_search_gethostbyname
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ echo "$as_me:$LINENO: checking for library containing socket" >&5
-echo $ECHO_N "checking for library containing socket... $ECHO_C" >&6; }
-if test "${ac_cv_search_socket+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char socket ();
-int
-main ()
-{
-return socket ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' socket; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_socket=$ac_res
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_socket+set}" = set; then
- break
-fi
-done
-if test "${ac_cv_search_socket+set}" = set; then
- :
-else
- ac_cv_search_socket=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_socket" >&5
-echo "${ECHO_T}$ac_cv_search_socket" >&6; }
-ac_res=$ac_cv_search_socket
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-{ echo "$as_me:$LINENO: checking for pcap_open_live in -lpcap" >&5
-echo $ECHO_N "checking for pcap_open_live in -lpcap... $ECHO_C" >&6; }
-if test "${ac_cv_lib_pcap_pcap_open_live+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpcap $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pcap_open_live ();
-int
-main ()
-{
-return pcap_open_live ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_pcap_pcap_open_live=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_pcap_pcap_open_live=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_lib_pcap_pcap_open_live" >&5
-echo "${ECHO_T}$ac_cv_lib_pcap_pcap_open_live" >&6; }
-if test $ac_cv_lib_pcap_pcap_open_live = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPCAP 1
-_ACEOF
-
- LIBS="-lpcap $LIBS"
-
-fi
-
-
-
-
-
-
-
-
-
-
-for ac_func in closefrom daemon setresuid setreuid setresgid setgid strlcpy strlcat
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval echo '${'$as_ac_var'}'`
- { echo "$as_me:$LINENO: result: $ac_res" >&5
-echo "${ECHO_T}$ac_res" >&6; }
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-{ echo "$as_me:$LINENO: checking for u_int64_t" >&5
-echo $ECHO_N "checking for u_int64_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_u_int64_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef u_int64_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_u_int64_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_u_int64_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int64_t" >&5
-echo "${ECHO_T}$ac_cv_type_u_int64_t" >&6; }
-if test $ac_cv_type_u_int64_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_U_INT64_T 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for int64_t" >&5
-echo $ECHO_N "checking for int64_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_int64_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef int64_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_int64_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_int64_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_int64_t" >&5
-echo "${ECHO_T}$ac_cv_type_int64_t" >&6; }
-if test $ac_cv_type_int64_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_INT64_T 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for uint64_t" >&5
-echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_uint64_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef uint64_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_uint64_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_uint64_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5
-echo "${ECHO_T}$ac_cv_type_uint64_t" >&6; }
-if test $ac_cv_type_uint64_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_UINT64_T 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for u_int32_t" >&5
-echo $ECHO_N "checking for u_int32_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_u_int32_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef u_int32_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_u_int32_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_u_int32_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int32_t" >&5
-echo "${ECHO_T}$ac_cv_type_u_int32_t" >&6; }
-if test $ac_cv_type_u_int32_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_U_INT32_T 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for int32_t" >&5
-echo $ECHO_N "checking for int32_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_int32_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef int32_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_int32_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_int32_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_int32_t" >&5
-echo "${ECHO_T}$ac_cv_type_int32_t" >&6; }
-if test $ac_cv_type_int32_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_INT32_T 1
-_ACEOF
-
-
-fi
-{ echo "$as_me:$LINENO: checking for uint32_t" >&5
-echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_uint32_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef uint32_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_uint32_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_uint32_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_uint32_t" >&5
-echo "${ECHO_T}$ac_cv_type_uint32_t" >&6; }
-if test $ac_cv_type_uint32_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_UINT32_T 1
-_ACEOF
-
-
-fi
-
-{ echo "$as_me:$LINENO: checking for u_int16_t" >&5
-echo $ECHO_N "checking for u_int16_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_u_int16_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef u_int16_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_u_int16_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_type_u_int16_t=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int16_t" >&5
-echo "${ECHO_T}$ac_cv_type_u_int16_t" >&6; }
-if test $ac_cv_type_u_int16_t = yes; then
cat >>confdefs.h <<_ACEOF
-#define HAVE_U_INT16_T 1
+#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
-
-fi
-{ echo "$as_me:$LINENO: checking for int16_t" >&5
-echo $ECHO_N "checking for int16_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_int16_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef int16_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_int16_t=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_type_int16_t=no
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_int16_t" >&5
-echo "${ECHO_T}$ac_cv_type_int16_t" >&6; }
-if test $ac_cv_type_int16_t = yes; then
-cat >>confdefs.h <<_ACEOF
-#define HAVE_INT16_T 1
-_ACEOF
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-fi
-{ echo "$as_me:$LINENO: checking for uint16_t" >&5
-echo $ECHO_N "checking for uint16_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_uint16_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef uint16_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_uint16_t=yes
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_cv_type_uint16_t=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_uint16_t" >&5
-echo "${ECHO_T}$ac_cv_type_uint16_t" >&6; }
-if test $ac_cv_type_uint16_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_UINT16_T 1
-_ACEOF
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
fi
-{ echo "$as_me:$LINENO: checking for u_int8_t" >&5
-echo $ECHO_N "checking for u_int8_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_u_int8_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef u_int8_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_u_int8_t=yes
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_cv_type_u_int8_t=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int8_t" >&5
-echo "${ECHO_T}$ac_cv_type_u_int8_t" >&6; }
-if test $ac_cv_type_u_int8_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_U_INT8_T 1
-_ACEOF
-
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
fi
-{ echo "$as_me:$LINENO: checking for int8_t" >&5
-echo $ECHO_N "checking for int8_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_int8_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef int8_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_int8_t=yes
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_cv_type_int8_t=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_int8_t" >&5
-echo "${ECHO_T}$ac_cv_type_int8_t" >&6; }
-if test $ac_cv_type_int8_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_INT8_T 1
-_ACEOF
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ fi
fi
-{ echo "$as_me:$LINENO: checking for uint8_t" >&5
-echo $ECHO_N "checking for uint8_t... $ECHO_C" >&6; }
-if test "${ac_cv_type_uint8_t+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef uint8_t ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_uint8_t=yes
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_cv_type_uint8_t=no
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_uint8_t" >&5
-echo "${ECHO_T}$ac_cv_type_uint8_t" >&6; }
-if test $ac_cv_type_uint8_t = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_UINT8_T 1
-_ACEOF
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
fi
-
-{ echo "$as_me:$LINENO: checking for char" >&5
-echo $ECHO_N "checking for char... $ECHO_C" >&6; }
-if test "${ac_cv_type_char+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef char ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_char=yes
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_cv_type_char=no
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5
-echo "${ECHO_T}$ac_cv_type_char" >&6; }
-
-{ echo "$as_me:$LINENO: checking size of char" >&5
-echo $ECHO_N "checking size of char... $ECHO_C" >&6; }
-if test "${ac_cv_sizeof_char+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
else
- if test "$ac_cv_type_char" = yes; then
- # The cast to long int works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef char ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
-test_array [0] = 0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef char ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef char ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
-test_array [0] = 0
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef char ac__type_sizeof_;
+
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
-test_array [0] = 0
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
-fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo= ac_hi=
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_file=''
fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef char ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
done
-case $ac_lo in
-?*) ac_cv_sizeof_char=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (char)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; } ;;
-esac
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef char ac__type_sizeof_;
-static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
-static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
-#include <stdlib.h>
int
main ()
{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (((long int) (sizeof (ac__type_sizeof_))) < 0)
- {
- long int i = longval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%lu\n", i);
- }
- return ferror (f) || fclose (f) != 0;
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_char=`cat conftest.val`
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (char)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.val
-else
- ac_cv_sizeof_char=0
-fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5
-echo "${ECHO_T}$ac_cv_sizeof_char" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_CHAR $ac_cv_sizeof_char
-_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
-
-{ echo "$as_me:$LINENO: checking for short int" >&5
-echo $ECHO_N "checking for short int... $ECHO_C" >&6; }
-if test "${ac_cv_type_short_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
-typedef short int ac__type_new_;
+
int
main ()
{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
+
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_short_int=yes
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
else
- echo "$as_me: failed program was:" >&5
+ $as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
- ac_cv_type_short_int=no
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_short_int" >&5
-echo "${ECHO_T}$ac_cv_type_short_int" >&6; }
-
-{ echo "$as_me:$LINENO: checking size of short int" >&5
-echo $ECHO_N "checking size of short int... $ECHO_C" >&6; }
-if test "${ac_cv_sizeof_short_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- if test "$ac_cv_type_short_int" = yes; then
- # The cast to long int works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef short int ac__type_sizeof_;
+
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
-test_array [0] = 0
+#ifndef __GNUC__
+ choke me
+#endif
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef short int ac__type_sizeof_;
+
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
-fi
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+int
+main ()
+{
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+ ;
+ return 0;
+}
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef short int ac__type_sizeof_;
+
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
-test_array [0] = 0
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef short int ac__type_sizeof_;
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
-test_array [0] = 0
-
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if test "x$ac_cv_prog_cc_c89" != xno; then :
- ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+IFS=$as_save_IFS
- ac_lo= ac_hi=
-fi
+rm -rf conftest.one conftest.two conftest.dir
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef short int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
- ac_lo=`expr '(' $ac_mid ')' + 1`
-fi
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_short_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (short int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; } ;;
-esac
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef short int ac__type_sizeof_;
-static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
-static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (((long int) (sizeof (ac__type_sizeof_))) < 0)
- {
- long int i = longval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%lu\n", i);
- }
- return ferror (f) || fclose (f) != 0;
+# Optional verbose warnings for gcc, see below
+WFLAGS="-Wall -Waggregate-return -Wcast-align -Wcast-qual"
+WFLAGS="$WFLAGS -Wmissing-declarations -Wmissing-prototypes"
+WFLAGS="$WFLAGS -Wno-conversion -Wpointer-arith -Wshadow"
+WFLAGS="$WFLAGS -Wuninitialized -Wcast-align -Wcast-qual"
+WFLAGS="$WFLAGS -Wformat=2 -Wformat-nonliteral -Wwrite-strings"
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_short_int=`cat conftest.val`
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Process flag arguments early, so they are available for tests later
+# Check whether --enable-gcc-warnings was given.
+if test "${enable_gcc_warnings+set}" = set; then :
+ enableval=$enable_gcc_warnings; if test "x$enableval" = "xyes" ; then CFLAGS="$CFLAGS $WFLAGS"; fi
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (short int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-rm -f conftest.val
-else
- ac_cv_sizeof_short_int=0
+
+
+# Check whether --with-cflags was given.
+if test "${with_cflags+set}" = set; then :
+ withval=$with_cflags; if test "x$withval" != "xno" ; then CFLAGS="$CFLAGS $withval"; fi
+
fi
+
+
+# Check whether --with-cppflags was given.
+if test "${with_cppflags+set}" = set; then :
+ withval=$with_cppflags; if test "x$withval" != "xno"; then CPPFLAGS="$CPPFLAGS $withval"; fi
+
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_short_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_short_int" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_SHORT_INT $ac_cv_sizeof_short_int
-_ACEOF
-{ echo "$as_me:$LINENO: checking for int" >&5
-echo $ECHO_N "checking for int... $ECHO_C" >&6; }
-if test "${ac_cv_type_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-typedef int ac__type_new_;
-int
-main ()
-{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_int=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Check whether --with-ldflags was given.
+if test "${with_ldflags+set}" = set; then :
+ withval=$with_ldflags; if test "x$withval" != "xno" ; then LDFLAGS="$LDFLAGS $withval"; fi
- ac_cv_type_int=no
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+# Check whether --with-libs was given.
+if test "${with_libs+set}" = set; then :
+ withval=$with_libs; if test "x$withval" != "xno" ; then LIBS="$LIBS $withval"; fi
+
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
-echo "${ECHO_T}$ac_cv_type_int" >&6; }
-{ echo "$as_me:$LINENO: checking size of int" >&5
-echo $ECHO_N "checking size of int... $ECHO_C" >&6; }
-if test "${ac_cv_sizeof_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$ac_cv_type_int" = yes; then
- # The cast to long int works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
-test_array [0] = 0
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+# Check whether --with-chrootdir was given.
+if test "${with_chrootdir+set}" = set; then :
+ withval=$with_chrootdir;
+cat >>confdefs.h <<_ACEOF
+#define PRIVDROP_CHROOT_DIR "${withval}"
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
-test_array [0] = 0
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
-test_array [0] = 0
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
- ;
- return 0;
-}
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
- ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ done
+ ac_cv_prog_CPP=$CPP
- ac_lo= ac_hi=
fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ # Broken: fails on valid input.
+continue
fi
+rm -f conftest.err conftest.i conftest.$ac_ext
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
+#include <ac_nonexistent.h>
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo=`expr '(' $ac_mid ')' + 1`
+ # Passes both tests.
+ac_preproc_ok=:
+break
fi
+rm -f conftest.err conftest.i conftest.$ac_ext
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
-case $ac_lo in
-?*) ac_cv_sizeof_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; } ;;
-esac
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef int ac__type_sizeof_;
-static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
-static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (((long int) (sizeof (ac__type_sizeof_))) < 0)
- {
- long int i = longval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%lu\n", i);
- }
- return ferror (f) || fclose (f) != 0;
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_int=`cat conftest.val`
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+
fi
-rm -f conftest.val
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
else
- ac_cv_sizeof_int=0
+ ac_cv_path_EGREP=$EGREP
fi
+
+ fi
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_int" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_INT $ac_cv_sizeof_int
-_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
-{ echo "$as_me:$LINENO: checking for long int" >&5
-echo $ECHO_N "checking for long int... $ECHO_C" >&6; }
-if test "${ac_cv_type_long_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
-typedef long int ac__type_new_;
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
int
main ()
{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
+
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_long_int=yes
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
- ac_cv_type_long_int=no
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
fi
+rm -f conftest*
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_long_int" >&5
-echo "${ECHO_T}$ac_cv_type_long_int" >&6; }
-{ echo "$as_me:$LINENO: checking size of long int" >&5
-echo $ECHO_N "checking size of long int... $ECHO_C" >&6; }
-if test "${ac_cv_sizeof_long_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$ac_cv_type_long_int" = yes; then
- # The cast to long int works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
-test_array [0] = 0
+#include <stdlib.h>
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef long int ac__type_sizeof_;
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
-
- ;
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
+if ac_fn_c_try_run "$LINENO"; then :
+
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
- ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
-test_array [0] = 0
+fi
- ;
- return 0;
-}
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+
+fi
+
+done
+
+
+for ac_header in net/bpf.h pcap.h pcap-bpf.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+
+fi
+
+done
+
+
+
+ac_fn_c_check_member "$LINENO" "struct sockaddr" "sa_len" "ac_cv_member_struct_sockaddr_sa_len" "#include <sys/types.h>
+ #include <sys/socket.h>
+"
+if test "x$ac_cv_member_struct_sockaddr_sa_len" = xyes; then :
+
+$as_echo "#define SOCK_HAS_LEN 1" >>confdefs.h
+
+fi
+
+
+ac_fn_c_check_member "$LINENO" "struct ip6_ext" "ip6e_nxt" "ac_cv_member_struct_ip6_ext_ip6e_nxt" "
+ #include <sys/types.h>
+ #include <sys/socket.h>
+ #include <netinet/in.h>
+ #include <netinet/ip6.h>
+
+"
+if test "x$ac_cv_member_struct_ip6_ext_ip6e_nxt" = xyes; then :
+
+$as_echo "#define HAVE_STRUCT_IP6_EXT 1" >>confdefs.h
+
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing daemon" >&5
+$as_echo_n "checking for library containing daemon... " >&6; }
+if ${ac_cv_search_daemon+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef long int ac__type_sizeof_;
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char daemon ();
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
-test_array [0] = 0
-
+return daemon ();
;
return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+}
+_ACEOF
+for ac_lib in '' bsd; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_daemon=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_daemon+:} false; then :
+ break
fi
+done
+if ${ac_cv_search_daemon+:} false; then :
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_lo= ac_hi=
+ ac_cv_search_daemon=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_daemon" >&5
+$as_echo "$ac_cv_search_daemon" >&6; }
+ac_res=$ac_cv_search_daemon
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
+$as_echo_n "checking for library containing gethostbyname... " >&6; }
+if ${ac_cv_search_gethostbyname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef long int ac__type_sizeof_;
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostbyname ();
int
main ()
{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
-
+return gethostbyname ();
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
+for ac_lib in '' nsl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_gethostbyname=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_gethostbyname+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_gethostbyname+:} false; then :
+
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_search_gethostbyname=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5
+$as_echo "$ac_cv_search_gethostbyname" >&6; }
+ac_res=$ac_cv_search_gethostbyname
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- ac_lo=`expr '(' $ac_mid ')' + 1`
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; } ;;
-esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socket" >&5
+$as_echo_n "checking for library containing socket... " >&6; }
+if ${ac_cv_search_socket+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
- typedef long int ac__type_sizeof_;
-static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
-static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
-#include <stdio.h>
-#include <stdlib.h>
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
int
main ()
{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (((long int) (sizeof (ac__type_sizeof_))) < 0)
- {
- long int i = longval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%lu\n", i);
- }
- return ferror (f) || fclose (f) != 0;
-
+return socket ();
;
return 0;
}
_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_long_int=`cat conftest.val`
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+for ac_lib in '' socket; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_socket=$ac_res
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_socket+:} false; then :
+ break
fi
-rm -f conftest.val
+done
+if ${ac_cv_search_socket+:} false; then :
+
else
- ac_cv_sizeof_long_int=0
+ ac_cv_search_socket=no
fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_int" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_LONG_INT $ac_cv_sizeof_long_int
-_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socket" >&5
+$as_echo "$ac_cv_search_socket" >&6; }
+ac_res=$ac_cv_search_socket
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+fi
-{ echo "$as_me:$LINENO: checking for long long int" >&5
-echo $ECHO_N "checking for long long int... $ECHO_C" >&6; }
-if test "${ac_cv_type_long_long_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pcap_open_live in -lpcap" >&5
+$as_echo_n "checking for pcap_open_live in -lpcap... " >&6; }
+if ${ac_cv_lib_pcap_pcap_open_live+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpcap $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-$ac_includes_default
-typedef long long int ac__type_new_;
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pcap_open_live ();
int
main ()
{
-if ((ac__type_new_ *) 0)
- return 0;
-if (sizeof (ac__type_new_))
- return 0;
+return pcap_open_live ();
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_long_long_int=yes
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_pcap_pcap_open_live=yes
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_lib_pcap_pcap_open_live=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pcap_pcap_open_live" >&5
+$as_echo "$ac_cv_lib_pcap_pcap_open_live" >&6; }
+if test "x$ac_cv_lib_pcap_pcap_open_live" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBPCAP 1
+_ACEOF
+
+ LIBS="-lpcap $LIBS"
- ac_cv_type_long_long_int=no
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+for ac_func in closefrom daemon setresuid setreuid setresgid setgid strlcpy strlcat
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_type_long_long_int" >&5
-echo "${ECHO_T}$ac_cv_type_long_long_int" >&6; }
+done
-{ echo "$as_me:$LINENO: checking size of long long int" >&5
-echo $ECHO_N "checking size of long long int... $ECHO_C" >&6; }
-if test "${ac_cv_sizeof_long_long_int+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test "$ac_cv_type_long_long_int" = yes; then
- # The cast to long int works around a bug in the HP C Compiler
- # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
- # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
- # This bug is HP SR number 8606223364.
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+
+ac_fn_c_check_type "$LINENO" "u_int64_t" "ac_cv_type_u_int64_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_int64_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_U_INT64_T 1
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
-test_array [0] = 0
- ;
- return 0;
-}
+
+fi
+ac_fn_c_check_type "$LINENO" "int64_t" "ac_cv_type_int64_t" "$ac_includes_default"
+if test "x$ac_cv_type_int64_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INT64_T 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=0 ac_mid=0
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+
+
+fi
+ac_fn_c_check_type "$LINENO" "uint64_t" "ac_cv_type_uint64_t" "$ac_includes_default"
+if test "x$ac_cv_type_uint64_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_UINT64_T 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_type "$LINENO" "u_int32_t" "ac_cv_type_u_int32_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_int32_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_U_INT32_T 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_type "$LINENO" "int32_t" "ac_cv_type_int32_t" "$ac_includes_default"
+if test "x$ac_cv_type_int32_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INT32_T 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_type "$LINENO" "uint32_t" "ac_cv_type_uint32_t" "$ac_includes_default"
+if test "x$ac_cv_type_uint32_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_UINT32_T 1
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
- ;
- return 0;
-}
+
+fi
+
+ac_fn_c_check_type "$LINENO" "u_int16_t" "ac_cv_type_u_int16_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_int16_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_U_INT16_T 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_lo=`expr $ac_mid + 1`
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid + 1`
+
fi
+ac_fn_c_check_type "$LINENO" "int16_t" "ac_cv_type_int16_t" "$ac_includes_default"
+if test "x$ac_cv_type_int16_t" = xyes; then :
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INT16_T 1
+_ACEOF
+
+
+fi
+ac_fn_c_check_type "$LINENO" "uint16_t" "ac_cv_type_uint16_t" "$ac_includes_default"
+if test "x$ac_cv_type_uint16_t" = xyes; then :
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+cat >>confdefs.h <<_ACEOF
+#define HAVE_UINT16_T 1
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
-test_array [0] = 0
- ;
- return 0;
-}
+
+fi
+ac_fn_c_check_type "$LINENO" "u_int8_t" "ac_cv_type_u_int8_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_int8_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_U_INT8_T 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=-1 ac_mid=-1
- while :; do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+
+
+fi
+ac_fn_c_check_type "$LINENO" "int8_t" "ac_cv_type_int8_t" "$ac_includes_default"
+if test "x$ac_cv_type_int8_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INT8_T 1
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
-test_array [0] = 0
- ;
- return 0;
-}
+
+fi
+ac_fn_c_check_type "$LINENO" "uint8_t" "ac_cv_type_uint8_t" "$ac_includes_default"
+if test "x$ac_cv_type_uint8_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_UINT8_T 1
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_lo=$ac_mid; break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_hi=`expr '(' $ac_mid ')' - 1`
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- ac_mid=`expr 2 '*' $ac_mid`
+
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char" >&5
+$as_echo_n "checking size of char... " >&6; }
+if ${ac_cv_sizeof_char+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (char))" "ac_cv_sizeof_char" "$ac_includes_default"; then :
- ac_lo= ac_hi=
+else
+ if test "$ac_cv_type_char" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (char)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_char=0
+ fi
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char" >&5
+$as_echo "$ac_cv_sizeof_char" >&6; }
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long long int ac__type_sizeof_;
-int
-main ()
-{
-static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
-test_array [0] = 0
- ;
- return 0;
-}
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_CHAR $ac_cv_sizeof_char
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_hi=$ac_mid
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short int" >&5
+$as_echo_n "checking size of short int... " >&6; }
+if ${ac_cv_sizeof_short_int+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short int))" "ac_cv_sizeof_short_int" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_short_int" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (short int)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_short_int=0
+ fi
+fi
- ac_lo=`expr '(' $ac_mid ')' + 1`
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short_int" >&5
+$as_echo "$ac_cv_sizeof_short_int" >&6; }
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in
-?*) ac_cv_sizeof_long_long_int=$ac_lo;;
-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long long int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; } ;;
-esac
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SHORT_INT $ac_cv_sizeof_short_int
_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
- typedef long long int ac__type_sizeof_;
-static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
-static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (((long int) (sizeof (ac__type_sizeof_))) < 0)
- {
- long int i = longval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%ld\n", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ((long int) (sizeof (ac__type_sizeof_))))
- return 1;
- fprintf (f, "%lu\n", i);
- }
- return ferror (f) || fclose (f) != 0;
- ;
- return 0;
-}
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
+$as_echo_n "checking size of int... " >&6; }
+if ${ac_cv_sizeof_int+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then :
+
+else
+ if test "$ac_cv_type_int" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (int)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_int=0
+ fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5
+$as_echo "$ac_cv_sizeof_int" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_sizeof_long_long_int=`cat conftest.val`
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long int" >&5
+$as_echo_n "checking size of long int... " >&6; }
+if ${ac_cv_sizeof_long_int+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long int))" "ac_cv_sizeof_long_int" "$ac_includes_default"; then :
-( exit $ac_status )
-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long int)
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute sizeof (long long int)
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+else
+ if test "$ac_cv_type_long_int" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long int)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_long_int=0
+ fi
fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+
fi
-rm -f conftest.val
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_int" >&5
+$as_echo "$ac_cv_sizeof_long_int" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG_INT $ac_cv_sizeof_long_int
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long int" >&5
+$as_echo_n "checking size of long long int... " >&6; }
+if ${ac_cv_sizeof_long_long_int+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long int))" "ac_cv_sizeof_long_long_int" "$ac_includes_default"; then :
+
else
- ac_cv_sizeof_long_long_int=0
+ if test "$ac_cv_type_long_long_int" = yes; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (long long int)
+See \`config.log' for more details" "$LINENO" 5; }
+ else
+ ac_cv_sizeof_long_long_int=0
+ fi
fi
+
fi
-{ echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long_int" >&5
-echo "${ECHO_T}$ac_cv_sizeof_long_long_int" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long_int" >&5
+$as_echo "$ac_cv_sizeof_long_long_int" >&6; }
+
+
+
cat >>confdefs.h <<_ACEOF
#define SIZEOF_LONG_LONG_INT $ac_cv_sizeof_long_long_int
_ACEOF
@@ -7926,147 +4282,97 @@
if test "x$ac_cv_type_uint8_t" = "xyes" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT8_T uint8_t
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT8_T uint8_t" >>confdefs.h
elif test "x$ac_cv_sizeof_char" = "x1" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT8_T unsigned char
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT8_T unsigned char" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 8-bit unsigned int type found" >&5
-echo "$as_me: error: No 8-bit unsigned int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 8-bit unsigned int type found" "$LINENO" 5
fi
if test "x$ac_cv_sizeof_char" = "x1" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_INT8_T signed char
-_ACEOF
+$as_echo "#define OUR_CFG_INT8_T signed char" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 8-bit signed int type found" >&5
-echo "$as_me: error: No 8-bit signed int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 8-bit signed int type found" "$LINENO" 5
fi
if test "x$ac_cv_type_uint16_t" = "xyes" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT16_T uint16_t
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT16_T uint16_t" >>confdefs.h
elif test "x$ac_cv_sizeof_short_int" = "x2" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT16_T unsigned short int
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT16_T unsigned short int" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 16-bit unsigned int type found" >&5
-echo "$as_me: error: No 16-bit unsigned int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 16-bit unsigned int type found" "$LINENO" 5
fi
if test "x$ac_cv_sizeof_short_int" = "x2" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_INT16_T short int
-_ACEOF
+$as_echo "#define OUR_CFG_INT16_T short int" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 16-bit signed int type found" >&5
-echo "$as_me: error: No 16-bit signed int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 16-bit signed int type found" "$LINENO" 5
fi
if test "x$ac_cv_type_uint32_t" = "xyes" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT32_T uint32_t
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT32_T uint32_t" >>confdefs.h
elif test "x$ac_cv_sizeof_int" = "x4" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT32_T unsigned int
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT32_T unsigned int" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 32-bit unsigned int type found" >&5
-echo "$as_me: error: No 32-bit unsigned int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 32-bit unsigned int type found" "$LINENO" 5
fi
if test "x$ac_cv_sizeof_int" = "x4" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_INT32_T int
-_ACEOF
+$as_echo "#define OUR_CFG_INT32_T int" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 32-bit signed int type found" >&5
-echo "$as_me: error: No 32-bit signed int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 32-bit signed int type found" "$LINENO" 5
fi
if test "x$ac_cv_type_uint64_t" = "xyes" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT64_T uint64_t
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT64_T uint64_t" >>confdefs.h
elif test "x$ac_cv_sizeof_long_int" = "x8" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT64_T unsigned long int
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT64_T unsigned long int" >>confdefs.h
elif test "x$ac_cv_sizeof_long_long_int" = "x8" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_U_INT64_T unsigned long long int
-_ACEOF
+$as_echo "#define OUR_CFG_U_INT64_T unsigned long long int" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 64-bit unsigned int type found" >&5
-echo "$as_me: error: No 64-bit unsigned int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 64-bit unsigned int type found" "$LINENO" 5
fi
if test "x$ac_cv_sizeof_long_int" = "x8" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_INT64_T long int
-_ACEOF
+$as_echo "#define OUR_CFG_INT64_T long int" >>confdefs.h
elif test "x$ac_cv_sizeof_long_long_int" = "x8" ; then
-cat >>confdefs.h <<\_ACEOF
-#define OUR_CFG_INT64_T long long int
-_ACEOF
+$as_echo "#define OUR_CFG_INT64_T long long int" >>confdefs.h
else
- { { echo "$as_me:$LINENO: error: No 64-bit signed int type found" >&5
-echo "$as_me: error: No 64-bit signed int type found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No 64-bit signed int type found" "$LINENO" 5
fi
if test "x$ac_cv_header_pcap_bpf_h" != "xyes" && \
test "x$ac_cv_header_net_bpf_h" != "xyes" ; then
- { { echo "$as_me:$LINENO: error: No BPF header found" >&5
-echo "$as_me: error: No BPF header found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No BPF header found" "$LINENO" 5
fi
if test "x$ac_cv_header_pcap_h" != "xyes" ; then
- { { echo "$as_me:$LINENO: error: No pcap.h header found" >&5
-echo "$as_me: error: No pcap.h header found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "No pcap.h header found" "$LINENO" 5
fi
if test "x$ac_cv_lib_pcap_pcap_open_live" != "xyes" ; then
- { { echo "$as_me:$LINENO: error: libpcap not found" >&5
-echo "$as_me: error: libpcap not found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "libpcap not found" "$LINENO" 5
fi
@@ -8101,12 +4407,13 @@
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
- *) $as_unset $ac_var ;;
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -8114,8 +4421,8 @@
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
@@ -8137,13 +4444,24 @@
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
else
- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
@@ -8156,14 +4474,15 @@
ac_libobjs=
ac_ltlibobjs=
+U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`echo "$ac_i" | sed "$ac_script"`
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -8171,12 +4490,14 @@
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -8186,55 +4507,79 @@
debug=false
ac_cs_recheck=false
ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
else
- PATH_SEPARATOR=:
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
fi
- rm -f conf$$.sh
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
fi
@@ -8243,20 +4588,19 @@
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
-as_nl='
-'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+as_myself=
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -8267,32 +4611,111 @@
as_myself=$0
fi
if test ! -f "$as_myself"; then
- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
-done
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
-# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -8306,13 +4729,17 @@
as_basename=false
fi
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
-# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
+$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
@@ -8327,122 +4754,130 @@
}
s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
- mkdir conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
+ fi
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
-# Find out whether ``test -x'' works. Don't use a zero-byte file, as
-# systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- as_executable_p="test -x"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
else
- as_executable_p=:
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
fi
-rm -f conf$$.file
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -8452,13 +4887,19 @@
exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-# Save the log message, to keep $[0] and so on meaningful, and to
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.60. Invocation command line was
+generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -8471,29 +4912,41 @@
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
Configuration files:
$config_files
@@ -8501,36 +4954,42 @@
Configuration headers:
$config_headers
-Report bugs to <bug-autoconf@gnu.org>."
+Report bugs to the package provider."
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.60,
- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.68,
+ with options \\"\$ac_cs_config\\"
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
+test -n "\$AWK" || AWK=awk
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
ac_need_defaults=:
while test $# != 0
do
case $1 in
- --*=*)
+ --*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
*)
ac_option=$1
ac_optarg=$2
@@ -8543,34 +5002,41 @@
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- echo "$ac_cs_version"; exit ;;
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
- { echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
--help | --hel | -h )
- echo "$ac_cs_usage"; exit ;;
+ $as_echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
- *) ac_config_targets="$ac_config_targets $1"
+ *) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
@@ -8585,30 +5051,32 @@
fi
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- CONFIG_SHELL=$SHELL
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
export CONFIG_SHELL
- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ exec "\$@"
fi
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
- echo "$ac_log"
+ $as_echo "$ac_log"
} >&5
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# Handling of arguments.
for ac_config_target in $ac_config_targets
@@ -8617,9 +5085,7 @@
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -8641,163 +5107,302 @@
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- tmp=
+ tmp= ac_tmp=
trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
+ trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
+ test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then
-_ACEOF
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
- cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-CC!$CC$ac_delim
-CFLAGS!$CFLAGS$ac_delim
-LDFLAGS!$LDFLAGS$ac_delim
-CPPFLAGS!$CPPFLAGS$ac_delim
-ac_ct_CC!$ac_ct_CC$ac_delim
-EXEEXT!$EXEEXT$ac_delim
-OBJEXT!$OBJEXT$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-CPP!$CPP$ac_delim
-GREP!$GREP$ac_delim
-EGREP!$EGREP$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 52; then
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
+rm -f conf$$subs.sh
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
- ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
s/^[^=]*=[ ]*$//
}'
fi
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
-for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS "
+shift
+for ac_tag
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -8816,7 +5421,7 @@
for ac_f
do
case $ac_f in
- -) ac_f="$tmp/stdin";;
+ -) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
@@ -8825,26 +5430,34 @@
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
- ac_file_inputs="$ac_file_inputs $ac_f"
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
- configure_input="Generated from "`IFS=:
- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin";;
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -8854,42 +5467,7 @@
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
+$as_echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -8907,20 +5485,15 @@
q
}
s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
+ as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
# A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
@@ -8960,12 +5533,12 @@
esac
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
+ac_sed_dataroot='
+/datarootdir/ {
p
q
}
@@ -8973,36 +5546,37 @@
/@docdir@/p
/@infodir@/p
/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
+ s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
+s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
@@ -9012,119 +5586,49 @@
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
- rm -f "$tmp/stdin"
+ rm -f "$ac_tmp/stdin"
case $ac_file in
- -) cat "$tmp/out"; rm -f "$tmp/out";;
- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
- esac
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
# CONFIG_HEADER
#
-_ACEOF
-
-# Transform confdefs.h into a sed script `conftest.defines', that
-# substitutes the proper values into config.h.in to produce config.h.
-rm -f conftest.defines conftest.tail
-# First, append a space to every undef/define line, to ease matching.
-echo 's/$/ /' >conftest.defines
-# Then, protect against being on the right side of a sed subst, or in
-# an unquoted here document, in config.status. If some macros were
-# called several times there might be several #defines for the same
-# symbol, which is useless. But do not sort them, since the last
-# AC_DEFINE must be honored.
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
-# NAME is the cpp macro being defined, VALUE is the value it is being given.
-# PARAMS is the parameter list in the macro definition--in most cases, it's
-# just an empty string.
-ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
-ac_dB='\\)[ (].*,\\1define\\2'
-ac_dC=' '
-ac_dD=' ,'
-
-uniq confdefs.h |
- sed -n '
- t rset
- :rset
- s/^[ ]*#[ ]*define[ ][ ]*//
- t ok
- d
- :ok
- s/[\\&,]/\\&/g
- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
- ' >>conftest.defines
-
-# Remove the space that was appended to ease matching.
-# Then replace #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-# (The regexp can be short, since the line contains either #define or #undef.)
-echo 's/ $//
-s,^[ #]*u.*,/* & */,' >>conftest.defines
-
-# Break up conftest.defines:
-ac_max_sed_lines=50
-
-# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
-# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
-# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
-# et cetera.
-ac_in='$ac_file_inputs'
-ac_out='"$tmp/out1"'
-ac_nxt='"$tmp/out2"'
-
-while :
-do
- # Write a here document:
- cat >>$CONFIG_STATUS <<_ACEOF
- # First, check the format of the line:
- cat >"\$tmp/defines.sed" <<\\CEOF
-/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
-/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
-b
-:def
-_ACEOF
- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
- echo 'CEOF
- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
- grep . conftest.tail >/dev/null || break
- rm -f conftest.defines
- mv conftest.tail conftest.defines
-done
-rm -f conftest.defines conftest.tail
-
-echo "ac_result=$ac_in" >>$CONFIG_STATUS
-cat >>$CONFIG_STATUS <<\_ACEOF
if test x"$ac_file" != x-; then
- echo "/* $configure_input */" >"$tmp/config.h"
- cat "$ac_result" >>"$tmp/config.h"
- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
- rm -f $ac_file
- mv "$tmp/config.h" $ac_file
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
- echo "/* $configure_input */"
- cat "$ac_result"
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
fi
- rm -f "$tmp/out12"
;;
@@ -9133,11 +5637,13 @@
done # for ac_tag
-{ (exit 0); exit 0; }
+as_fn_exit 0
_ACEOF
-chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
@@ -9157,7 +5663,11 @@
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/configure.ac
^
|
| @@ -1,5 +1,3 @@
-# $Id: configure.ac,v 1.5 2004/11/08 23:03:28 djm Exp $
-#
# Copyright (c) 2004 Damien Miller
#
# Permission to use, copy, modify, and distribute this software for any
@@ -26,7 +24,7 @@
WFLAGS="$WFLAGS -Wmissing-declarations -Wmissing-prototypes"
WFLAGS="$WFLAGS -Wno-conversion -Wpointer-arith -Wshadow"
WFLAGS="$WFLAGS -Wuninitialized -Wcast-align -Wcast-qual"
-WFLAGS="$WFLAGS -WformatC=2 -Wformat-nonliteral -Wwrite-strings"
+WFLAGS="$WFLAGS -Wformat=2 -Wformat-nonliteral -Wwrite-strings"
# Process flag arguments early, so they are available for tests later
AC_ARG_ENABLE(gcc-warnings,
@@ -49,6 +47,10 @@
[ --with-libs Specify additional libraries to link with],
[ if test "x$withval" != "xno" ; then LIBS="$LIBS $withval"; fi ]
)
+AC_ARG_WITH(chrootdir,
+ [ --with-chrootdir Specify chroot directory],
+ [ AC_DEFINE_UNQUOTED([PRIVDROP_CHROOT_DIR], ["${withval}"], [privdrop chroot directory]) ]
+)
AC_CHECK_HEADERS(net/bpf.h pcap.h pcap-bpf.h)
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/convtime.c
^
|
| @@ -25,8 +25,6 @@
#include "common.h"
#include "convtime.h"
-RCSID("$Id: convtime.c,v 1.2 2004/09/10 09:08:08 djm Exp $");
-
#define SECONDS 1
#define MINUTES (SECONDS * 60)
#define HOURS (MINUTES * 60)
|
|
[-]
[+]
|
Added |
softflowd-0.9.9.tar.bz2/freelist.c
^
|
| @@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2007 Damien Miller. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "common.h"
+#include "freelist.h"
+#include "log.h"
+
+#define FREELIST_MAX_ALLOC 0x1000000
+#define FREELIST_ALLOC_ALIGN 16
+#define FREELIST_INITIAL_ALLOC 16
+
+#ifndef roundup
+#define roundup(x, y) ((((x) + (y) - 1)/(y))*(y))
+#endif /* roundup */
+
+#undef FREELIST_DEBUG
+#ifdef FREELIST_DEBUG
+# define FLOGIT(a) logit a
+#else
+# define FLOGIT(a)
+#endif
+
+void
+freelist_init(struct freelist *fl, size_t allocsz)
+{
+ FLOGIT((LOG_DEBUG, "%s: %s(%p, %zu)", __func__, __func__, fl, allocsz));
+ bzero(fl, sizeof(fl));
+ fl->allocsz = roundup(allocsz, FREELIST_ALLOC_ALIGN);
+ fl->free_entries = NULL;
+}
+
+static int
+freelist_grow(struct freelist *fl)
+{
+ size_t i, oldnalloc, need;
+ void *p;
+
+ FLOGIT((LOG_DEBUG, "%s: %s(%p)", __func__, __func__, fl));
+ FLOGIT((LOG_DEBUG, "%s: nalloc = %zu", __func__, fl->nalloc));
+
+ /* Sanity check */
+ if (fl->nalloc > FREELIST_MAX_ALLOC)
+ return -1;
+
+ oldnalloc = fl->nalloc;
+ if (fl->nalloc == 0)
+ fl->nalloc = FREELIST_INITIAL_ALLOC;
+ else
+ fl->nalloc <<= 1;
+ if (fl->nalloc > FREELIST_MAX_ALLOC)
+ fl->nalloc = FREELIST_MAX_ALLOC;
+ FLOGIT((LOG_DEBUG, "%s: nalloc now %zu", __func__, fl->nalloc));
+
+ /* Check for integer overflow */
+ if (SIZE_MAX / fl->nalloc < fl->allocsz ||
+ SIZE_MAX / fl->nalloc < sizeof(*fl->free_entries)) {
+ FLOGIT((LOG_DEBUG, "%s: integer overflow", __func__));
+ resize_fail:
+ fl->nalloc = oldnalloc;
+ return -1;
+ }
+
+ /* Allocate freelist - max size of nalloc */
+ need = fl->nalloc * sizeof(*fl->free_entries);
+ if ((p = realloc(fl->free_entries, need)) == NULL) {
+ FLOGIT((LOG_DEBUG, "%s: realloc(%zu) failed", __func__, need));
+ goto resize_fail;
+ }
+
+ /* Allocate the entries */
+ fl->free_entries = p;
+ need = (fl->nalloc - oldnalloc) * fl->allocsz;
+ if ((p = malloc(need)) == NULL) {
+ FLOGIT((LOG_DEBUG, "%s: malloc(%zu) failed", __func__, need));
+ goto resize_fail;
+ }
+ /*
+ * XXX store these malloc ranges in a tree or list, so we can
+ * validate them in _get/_put. Check that r_low <= addr < r_high, and
+ * (addr - r_low) % fl->allocsz == 0
+ */
+
+ fl->navail = fl->nalloc - oldnalloc;
+ for (i = 0; i < fl->navail; i++)
+ fl->free_entries[i] = (u_char *)p + (i * fl->allocsz);
+ for (i = fl->navail; i < fl->nalloc; i++)
+ fl->free_entries[i] = NULL;
+
+ FLOGIT((LOG_DEBUG, "%s: done, navail = %zu", __func__, fl->navail));
+ return 0;
+}
+
+void *
+freelist_get(struct freelist *fl)
+{
+ void *r;
+
+ FLOGIT((LOG_DEBUG, "%s: %s(%p)", __func__, __func__, fl));
+ FLOGIT((LOG_DEBUG, "%s: navail = %zu", __func__, fl->navail));
+
+ if (fl->navail == 0) {
+ if (freelist_grow(fl) == -1)
+ return NULL;
+ }
+
+ /* Sanity check */
+ if (fl->navail == 0 || fl->navail > FREELIST_MAX_ALLOC ||
+ fl->free_entries[fl->navail - 1] == NULL) {
+ logit(LOG_ERR, "%s: invalid navail", __func__);
+ raise(SIGSEGV);
+ }
+
+ fl->navail--;
+ r = fl->free_entries[fl->navail];
+ fl->free_entries[fl->navail] = NULL;
+
+ FLOGIT((LOG_DEBUG, "%s: done, navail = %zu", __func__, fl->navail));
+ return r;
+}
+
+void
+freelist_put(struct freelist *fl, void *p)
+{
+ FLOGIT((LOG_DEBUG, "%s: %s(%p, %zu)", __func__, __func__, fl, p));
+ FLOGIT((LOG_DEBUG, "%s: navail = %zu", __func__, fl->navail));
+ FLOGIT((LOG_DEBUG, "%s: nalloc = %zu", __func__, fl->navail));
+
+ /* Sanity check */
+ if (fl->navail >= fl->nalloc) {
+ logit(LOG_ERR, "%s: freelist navail >= nalloc", __func__);
+ raise(SIGSEGV);
+ }
+ if (fl->free_entries[fl->navail] != NULL) {
+ logit(LOG_ERR, "%s: free_entries[%lu] != NULL",
+ __func__, (unsigned long)fl->navail);
+ raise(SIGSEGV);
+ }
+
+ fl->free_entries[fl->navail] = p;
+ fl->navail++;
+
+ FLOGIT((LOG_DEBUG, "%s: done, navail = %zu", __func__, fl->navail));
+}
+
+
|
|
[-]
[+]
|
Added |
softflowd-0.9.9.tar.bz2/freelist.h
^
|
| @@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2007 Damien Miller. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FREELIST_H
+#define _FREELIST_H
+
+#include "common.h"
+
+/* Simple freelist of fixed-sized allocations */
+struct freelist {
+ size_t allocsz;
+ size_t nalloc;
+ size_t navail;
+ void **free_entries;
+};
+
+/*
+ * Initialise a freelist.
+ * allocsz is the size of the individual allocations
+ */
+void freelist_init(struct freelist *freelist, size_t allocsz);
+
+/*
+ * Get an entry from a freelist.
+ * Will allocate new entries if necessary
+ * Returns pointer to allocated memory or NULL on failure.
+ */
+void *freelist_get(struct freelist *freelist);
+
+/*
+ * Returns an entry to the freelist.
+ * p must be a pointer to an allocation from the freelist.
+ */
+void freelist_put(struct freelist *freelist, void *p);
+
+#endif /* FREELIST_H */
+
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/log.c
^
|
| @@ -22,14 +22,10 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: log.c,v 1.2 2004/09/10 09:08:08 djm Exp $ */
-
#include "common.h"
#include "log.h"
#include <stdarg.h>
-RCSID("$Id: log.c,v 1.2 2004/09/10 09:08:08 djm Exp $");
-
static int logstderr = 0;
void
@@ -38,7 +34,7 @@
if (to_stderr)
logstderr = 1;
else
- openlog(PROGNAME, LOG_PID, LOG_DAEMON);
+ openlog(PROGNAME, LOG_PID|LOG_NDELAY, LOG_DAEMON);
}
void
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/log.h
^
|
| @@ -22,8 +22,6 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: log.h,v 1.1 2004/04/16 01:51:51 djm Exp $ */
-
#ifndef _LOG_H
#define _LOG_H
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/mkinstalldirs
^
|
| @@ -4,8 +4,6 @@
# Created: 1993-05-16
# Public domain
-# $Id: mkinstalldirs,v 1.1 2005/12/22 02:23:41 djm Exp $
-
errstatus=0
for file
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/netflow1.c
^
|
| @@ -22,19 +22,15 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: netflow1.c,v 1.2 2005/05/05 03:31:42 djm Exp $ */
-
#include "common.h"
#include "log.h"
#include "treetype.h"
#include "softflowd.h"
-RCSID("$Id: netflow1.c,v 1.2 2005/05/05 03:31:42 djm Exp $");
-
/*
* This is the Cisco Netflow(tm) version 1 packet format
* Based on:
- * http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nfc/nfc_3_0/nfc_ug/nfcform.htm
+ * http://www.cisco.com/en/US/products/sw/netmgtsw/ps1964/products_implementation_design_guide09186a00800d6a11.html
*/
struct NF1_HEADER {
u_int16_t version, flows;
@@ -64,9 +60,9 @@
* Returns number of packets sent or -1 on error
*/
int
-send_netflow_v1(struct FLOW **flows, int num_flows, int nfsock,
+send_netflow_v1(struct FLOW **flows, int num_flows, int nfsock, u_int16_t ifidx,
u_int64_t *flows_exported, struct timeval *system_boot_time,
- int verbose_flag)
+ int verbose_flag, struct OPTION *option)
{
struct timeval now;
u_int32_t uptime_ms;
@@ -103,8 +99,10 @@
hdr->time_nanosec = htonl(now.tv_usec * 1000);
offset = sizeof(*hdr);
}
+
flw = (struct NF1_FLOW *)(packet + offset);
-
+ flw->if_index_in = flw->if_index_out = htons(ifidx);
+
/* NetFlow v.1 doesn't do IPv6 */
if (flows[i]->af != AF_INET)
continue;
@@ -127,8 +125,9 @@
j++;
hdr->flows++;
}
- flw = (struct NF1_FLOW *)(packet + offset);
+ flw = (struct NF1_FLOW *)(packet + offset);
+ flw->if_index_in = flw->if_index_out = htons(ifidx);
if (flows[i]->octets[1] > 0) {
flw->src_ip = flows[i]->addr[1].v4.s_addr;
flw->dest_ip = flows[i]->addr[0].v4.s_addr;
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/netflow5.c
^
|
| @@ -22,24 +22,21 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: netflow5.c,v 1.3 2005/05/05 03:31:42 djm Exp $ */
-
#include "common.h"
#include "log.h"
#include "treetype.h"
#include "softflowd.h"
-RCSID("$Id: netflow5.c,v 1.3 2005/05/05 03:31:42 djm Exp $");
-
/*
* This is the Cisco Netflow(tm) version 5 packet format
* Based on:
- * http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nfc/nfc_3_0/nfc_ug/nfcform.htm
+ * http://www.cisco.com/en/US/products/sw/netmgtsw/ps1964/products_implementation_design_guide09186a00800d6a11.html
*/
struct NF5_HEADER {
u_int16_t version, flows;
u_int32_t uptime_ms, time_sec, time_nanosec, flow_sequence;
- u_int8_t engine_type, engine_id, reserved1, reserved2;
+ u_int8_t engine_type, engine_id;
+ u_int16_t sampling_interval;
};
struct NF5_FLOW {
u_int32_t src_ip, dest_ip, nexthop_ip;
@@ -62,9 +59,9 @@
* Returns number of packets sent or -1 on error
*/
int
-send_netflow_v5(struct FLOW **flows, int num_flows, int nfsock,
+send_netflow_v5(struct FLOW **flows, int num_flows, int nfsock, u_int16_t ifidx,
u_int64_t *flows_exported, struct timeval *system_boot_time,
- int verbose_flag)
+ int verbose_flag, struct OPTION *option)
{
struct timeval now;
u_int32_t uptime_ms;
@@ -100,10 +97,15 @@
hdr->time_sec = htonl(now.tv_sec);
hdr->time_nanosec = htonl(now.tv_usec * 1000);
hdr->flow_sequence = htonl(*flows_exported);
+ if (option->sample > 0) {
+ hdr->sampling_interval =
+ htons(0x01 << 14 | option->sample & 0x3FFF);
+ }
/* Other fields are left zero */
offset = sizeof(*hdr);
}
flw = (struct NF5_FLOW *)(packet + offset);
+ flw->if_index_in = flw->if_index_out = htons(ifidx);
/* NetFlow v.5 doesn't do IPv6 */
if (flows[i]->af != AF_INET)
@@ -127,7 +129,9 @@
j++;
hdr->flows++;
}
+
flw = (struct NF5_FLOW *)(packet + offset);
+ flw->if_index_in = flw->if_index_out = htons(ifidx);
if (flows[i]->octets[1] > 0) {
flw->src_ip = flows[i]->addr[1].v4.s_addr;
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/netflow9.c
^
|
| @@ -22,15 +22,11 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: netflow9.c,v 1.9 2006/03/16 08:23:13 djm Exp $ */
-
#include "common.h"
#include "log.h"
#include "treetype.h"
#include "softflowd.h"
-RCSID("$Id: netflow9.c,v 1.9 2006/03/16 08:23:13 djm Exp $");
-
/* Netflow v.9 */
struct NF9_HEADER {
u_int16_t version, flows;
@@ -44,6 +40,10 @@
struct NF9_FLOWSET_HEADER_COMMON c;
u_int16_t template_id, count;
} __packed;
+struct NF9_OPTION_TEMPLATE_FLOWSET_HEADER {
+ struct NF9_FLOWSET_HEADER_COMMON c;
+ u_int16_t template_id, scope_length, option_length;
+} __packed;
struct NF9_TEMPLATE_FLOWSET_RECORD {
u_int16_t type, length;
} __packed;
@@ -64,28 +64,43 @@
#define NF9_L4_SRC_PORT 7
#define NF9_IPV4_SRC_ADDR 8
/* ... */
+#define NF9_IF_INDEX_IN 10
#define NF9_L4_DST_PORT 11
#define NF9_IPV4_DST_ADDR 12
/* ... */
+#define NF9_IF_INDEX_OUT 14
+/* ... */
#define NF9_LAST_SWITCHED 21
#define NF9_FIRST_SWITCHED 22
/* ... */
#define NF9_IPV6_SRC_ADDR 27
#define NF9_IPV6_DST_ADDR 28
/* ... */
+#define NF9_SAMPLING_INTERVAL 34
+#define NF9_SAMPLING_ALGORITHM 35
+/* ... */
#define NF9_IP_PROTOCOL_VERSION 60
/* Stuff pertaining to the templates that softflowd uses */
-#define NF9_SOFTFLOWD_TEMPLATE_NRECORDS 11
+#define NF9_SOFTFLOWD_TEMPLATE_NRECORDS 13
struct NF9_SOFTFLOWD_TEMPLATE {
struct NF9_TEMPLATE_FLOWSET_HEADER h;
struct NF9_TEMPLATE_FLOWSET_RECORD r[NF9_SOFTFLOWD_TEMPLATE_NRECORDS];
} __packed;
+#define NF9_SOFTFLOWD_OPTION_TEMPLATE_SCOPE_RECORDS 1
+#define NF9_SOFTFLOWD_OPTION_TEMPLATE_NRECORDS 2
+struct NF9_SOFTFLOWD_OPTION_TEMPLATE {
+ struct NF9_OPTION_TEMPLATE_FLOWSET_HEADER h;
+ struct NF9_TEMPLATE_FLOWSET_RECORD s[NF9_SOFTFLOWD_OPTION_TEMPLATE_SCOPE_RECORDS];
+ struct NF9_TEMPLATE_FLOWSET_RECORD r[NF9_SOFTFLOWD_OPTION_TEMPLATE_NRECORDS];
+} __packed;
+
/* softflowd data flowset types */
struct NF9_SOFTFLOWD_DATA_COMMON {
- u_int32_t first_switched, last_switched;
+ u_int32_t last_switched, first_switched;
u_int32_t bytes, packets;
+ u_int32_t if_index_in, if_index_out;
u_int16_t src_port, dst_port;
u_int8_t protocol, tcp_flags, ipproto;
} __packed;
@@ -100,22 +115,44 @@
struct NF9_SOFTFLOWD_DATA_COMMON c;
} __packed;
+struct NF9_SOFTFLOWD_OPTION_DATA {
+ struct NF9_FLOWSET_HEADER_COMMON c;
+ u_int32_t scope_ifidx;
+ u_int32_t sampling_interval;
+ u_int8_t sampling_algorithm;
+ u_int8_t padding[3];
+} __packed;
+
/* Local data: templates and counters */
#define NF9_SOFTFLOWD_MAX_PACKET_SIZE 512
#define NF9_SOFTFLOWD_V4_TEMPLATE_ID 1024
#define NF9_SOFTFLOWD_V6_TEMPLATE_ID 2048
+#define NF9_SOFTFLOWD_OPTION_TEMPLATE_ID 256
#define NF9_DEFAULT_TEMPLATE_INTERVAL 16
+/* ... */
+#define NF9_OPTION_SCOPE_SYSTEM 1
+#define NF9_OPTION_SCOPE_INTERFACE 2
+#define NF9_OPTION_SCOPE_LINECARD 3
+#define NF9_OPTION_SCOPE_CACHE 4
+#define NF9_OPTION_SCOPE_TEMPLATE 5
+/* ... */
+#define NF9_SAMPLING_ALGORITHM_DETERMINISTIC 1
+#define NF9_SAMPLING_ALGORITHM_RANDOM 2
+/* ... */
+
static struct NF9_SOFTFLOWD_TEMPLATE v4_template;
static struct NF9_SOFTFLOWD_TEMPLATE v6_template;
+static struct NF9_SOFTFLOWD_OPTION_TEMPLATE option_template;
+static struct NF9_SOFTFLOWD_OPTION_DATA option_data;
static int nf9_pkts_until_template = -1;
static void
nf9_init_template(void)
{
bzero(&v4_template, sizeof(v4_template));
- v4_template.h.c.flowset_id = htons(0);
+ v4_template.h.c.flowset_id = htons(NF9_TEMPLATE_FLOWSET_ID);
v4_template.h.c.length = htons(sizeof(v4_template));
v4_template.h.template_id = htons(NF9_SOFTFLOWD_V4_TEMPLATE_ID);
v4_template.h.count = htons(NF9_SOFTFLOWD_TEMPLATE_NRECORDS);
@@ -131,19 +168,23 @@
v4_template.r[4].length = htons(4);
v4_template.r[5].type = htons(NF9_IN_PACKETS);
v4_template.r[5].length = htons(4);
- v4_template.r[6].type = htons(NF9_L4_SRC_PORT);
- v4_template.r[6].length = htons(2);
- v4_template.r[7].type = htons(NF9_L4_DST_PORT);
- v4_template.r[7].length = htons(2);
- v4_template.r[8].type = htons(NF9_IN_PROTOCOL);
- v4_template.r[8].length = htons(1);
- v4_template.r[9].type = htons(NF9_TCP_FLAGS);
- v4_template.r[9].length = htons(1);
- v4_template.r[10].type = htons(NF9_IP_PROTOCOL_VERSION);
+ v4_template.r[6].type = htons(NF9_IF_INDEX_IN);
+ v4_template.r[6].length = htons(4);
+ v4_template.r[7].type = htons(NF9_IF_INDEX_OUT);
+ v4_template.r[7].length = htons(4);
+ v4_template.r[8].type = htons(NF9_L4_SRC_PORT);
+ v4_template.r[8].length = htons(2);
+ v4_template.r[9].type = htons(NF9_L4_DST_PORT);
+ v4_template.r[9].length = htons(2);
+ v4_template.r[10].type = htons(NF9_IN_PROTOCOL);
v4_template.r[10].length = htons(1);
+ v4_template.r[11].type = htons(NF9_TCP_FLAGS);
+ v4_template.r[11].length = htons(1);
+ v4_template.r[12].type = htons(NF9_IP_PROTOCOL_VERSION);
+ v4_template.r[12].length = htons(1);
bzero(&v6_template, sizeof(v6_template));
- v6_template.h.c.flowset_id = htons(0);
+ v6_template.h.c.flowset_id = htons(NF9_TEMPLATE_FLOWSET_ID);
v6_template.h.c.length = htons(sizeof(v6_template));
v6_template.h.template_id = htons(NF9_SOFTFLOWD_V6_TEMPLATE_ID);
v6_template.h.count = htons(NF9_SOFTFLOWD_TEMPLATE_NRECORDS);
@@ -159,21 +200,47 @@
v6_template.r[4].length = htons(4);
v6_template.r[5].type = htons(NF9_IN_PACKETS);
v6_template.r[5].length = htons(4);
- v6_template.r[6].type = htons(NF9_L4_SRC_PORT);
- v6_template.r[6].length = htons(2);
- v6_template.r[7].type = htons(NF9_L4_DST_PORT);
- v6_template.r[7].length = htons(2);
- v6_template.r[8].type = htons(NF9_IN_PROTOCOL);
- v6_template.r[8].length = htons(1);
- v6_template.r[9].type = htons(NF9_TCP_FLAGS);
- v6_template.r[9].length = htons(1);
- v6_template.r[10].type = htons(NF9_IP_PROTOCOL_VERSION);
+ v6_template.r[6].type = htons(NF9_IF_INDEX_IN);
+ v6_template.r[6].length = htons(4);
+ v6_template.r[7].type = htons(NF9_IF_INDEX_OUT);
+ v6_template.r[7].length = htons(4);
+ v6_template.r[8].type = htons(NF9_L4_SRC_PORT);
+ v6_template.r[8].length = htons(2);
+ v6_template.r[9].type = htons(NF9_L4_DST_PORT);
+ v6_template.r[9].length = htons(2);
+ v6_template.r[10].type = htons(NF9_IN_PROTOCOL);
v6_template.r[10].length = htons(1);
+ v6_template.r[11].type = htons(NF9_TCP_FLAGS);
+ v6_template.r[11].length = htons(1);
+ v6_template.r[12].type = htons(NF9_IP_PROTOCOL_VERSION);
+ v6_template.r[12].length = htons(1);
}
+static void
+nf9_init_option(u_int16_t ifidx, struct OPTION *option) {
+ bzero(&option_template, sizeof(option_template));
+ option_template.h.c.flowset_id = htons(NF9_OPTIONS_FLOWSET_ID);
+ option_template.h.c.length = htons(sizeof(option_template));
+ option_template.h.template_id = htons(NF9_SOFTFLOWD_OPTION_TEMPLATE_ID);
+ option_template.h.scope_length = htons(sizeof(option_template.s));
+ option_template.h.option_length = htons(sizeof(option_template.r));
+ option_template.s[0].type = htons(NF9_OPTION_SCOPE_INTERFACE);
+ option_template.s[0].length = htons(sizeof(option_data.scope_ifidx));
+ option_template.r[0].type = htons(NF9_SAMPLING_INTERVAL);
+ option_template.r[0].length = htons(sizeof(option_data.sampling_interval));
+ option_template.r[1].type = htons(NF9_SAMPLING_ALGORITHM);
+ option_template.r[1].length = htons(sizeof(option_data.sampling_algorithm));
+
+ bzero(&option_data, sizeof(option_data));
+ option_data.c.flowset_id = htons(NF9_SOFTFLOWD_OPTION_TEMPLATE_ID);
+ option_data.c.length = htons(sizeof(option_data));
+ option_data.scope_ifidx = htonl(ifidx);
+ option_data.sampling_interval = htonl(option->sample);
+ option_data.sampling_algorithm = NF9_SAMPLING_ALGORITHM_DETERMINISTIC;
+}
static int
nf_flow_to_flowset(const struct FLOW *flow, u_char *packet, u_int len,
- const struct timeval *system_boot_time, u_int *len_used)
+ u_int16_t ifidx, const struct timeval *system_boot_time, u_int *len_used)
{
union {
struct NF9_SOFTFLOWD_DATA_V4 d4;
@@ -217,6 +284,8 @@
dc[1]->bytes = htonl(flow->octets[1]);
dc[0]->packets = htonl(flow->packets[0]);
dc[1]->packets = htonl(flow->packets[1]);
+ dc[0]->if_index_in = dc[0]->if_index_out = htonl(ifidx);
+ dc[1]->if_index_in = dc[1]->if_index_out = htonl(ifidx);
dc[0]->src_port = dc[1]->dst_port = flow->port[0];
dc[1]->src_port = dc[0]->dst_port = flow->port[1];
dc[0]->protocol = dc[1]->protocol = flow->protocol;
@@ -247,9 +316,9 @@
* Returns number of packets sent or -1 on error
*/
int
-send_netflow_v9(struct FLOW **flows, int num_flows, int nfsock,
+send_netflow_v9(struct FLOW **flows, int num_flows, int nfsock, u_int16_t ifidx,
u_int64_t *flows_exported, struct timeval *system_boot_time,
- int verbose_flag)
+ int verbose_flag, struct OPTION *option)
{
struct NF9_HEADER *nf9;
struct NF9_DATA_FLOWSET_HEADER *dh;
@@ -264,6 +333,9 @@
if (nf9_pkts_until_template == -1) {
nf9_init_template();
nf9_pkts_until_template = 0;
+ if (option != NULL && option->sample > 1){
+ nf9_init_option(ifidx, option);
+ }
}
last_valid = num_packets = 0;
@@ -287,6 +359,15 @@
memcpy(packet + offset, &v6_template,
sizeof(v6_template));
offset += sizeof(v6_template);
+ if (option != NULL && option->sample > 1){
+ memcpy(packet + offset, &option_template,
+ sizeof(option_template));
+ offset += sizeof(option_template);
+ memcpy(packet + offset, &option_data,
+ sizeof(option_data));
+ offset += sizeof(option_data);
+ }
+
nf9_pkts_until_template = NF9_DEFAULT_TEMPLATE_INTERVAL;
}
@@ -321,7 +402,7 @@
}
r = nf_flow_to_flowset(flows[i + j], packet + offset,
- sizeof(packet) - offset, system_boot_time, &inc);
+ sizeof(packet) - offset, ifidx, system_boot_time, &inc);
if (r <= 0) {
/* yank off data header, if we had to go back */
if (last_valid)
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowctl.8
^
|
| @@ -1,5 +1,3 @@
-.\" $Id: softflowctl.8,v 1.2 2006/03/16 08:24:19 djm Exp $
-.\"
.\" Copyright (c) 2002 Damien Miller. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
@@ -36,17 +34,17 @@
.Sh DESCRIPTION
.Nm
is a remote control program used to control a running
-.Xr softflowd 8
+.Xr softflowd 8
daemon.
.Pp
-The command-line options are as follows:
+The command line options are as follows:
.Bl -tag -width Ds
.It Fl c Ar ctlsock
Specify an alternate location for the remote control socket.
-Default is
+Default is
.Pa /var/run/softflowd.ctl
.It Fl h
-Displays commandline usage information.
+Display command line usage information.
.El
.Pp
.Sh COMMANDS
@@ -54,25 +52,27 @@
.It Pa shutdown
Ask
.Xr softflowd 8
-to gracefully exit. This is equivalent to sending it a
-.Dv SIGTERM
-or
+to gracefully exit.
+This is equivalent to sending it a
+.Dv SIGTERM
+or
.Dv SIGINT .
.It Pa exit
Ask
.Xr softflowd 8
-to immediately exit. No flow expiry processing or data export is performed.
+to immediately exit.
+No flow expiry processing or data export is performed.
.It Pa expire-all
Immediately expire all tracked flows.
.It Pa delete-all
-Immediately delete all tracked flows. No flow expiry processing or data
-export is performed.
+Immediately delete all tracked flows.
+No flow expiry processing or data export is performed.
.It Pa statistics
-Return statistics collected by
+Return statistics collected by
.Xr softflowd 8
on expired flows.
.It Pa debug+
-Increase the debugging level of
+Increase the debugging level of
.Xr softflowd 8
.It Pa debug-
Decrease the debugging level.
@@ -89,7 +89,10 @@
Resend a NetFlow v.9 template record before the next flow export.
Has no effect for other flow export versions.
.El
+.Sh BUGS
+All times are unconditionally displayed in UTC, regardless of the system
+timezone.
.Sh AUTHORS
-Damien Miller <djm@mindrot.org>
+.An Damien Miller Aq djm@mindrot.org
.Sh SEE ALSO
.Xr softflowd 8
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowctl.c
^
|
| @@ -24,8 +24,6 @@
#include "common.h"
-RCSID("$Id: softflowctl.c,v 1.6 2004/09/10 09:20:56 djm Exp $");
-
static void
usage(void)
{
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowd.8
^
|
| @@ -1,5 +1,3 @@
-.\" $Id: softflowd.8,v 1.17 2006/02/11 11:27:38 djm Exp $
-.\"
.\" Copyright (c) 2002 Damien Miller. All rights reserved.
.\" Portions Copyright (c) 2001 Kevin Steves. All rights reserved.
.\"
@@ -32,33 +30,41 @@
.Sh SYNOPSIS
.Nm softflowd
.Op Fl 6dDh
-.Op Fl i Ar interface
-.Op Fl r Ar pcap_file
-.Op Fl t Ar timeout_name=seconds
+.Op Fl L Ar hoplimit
+.Op Fl T Ar track_level
+.Op Fl c Ar ctl_sock
+.Bk -words
+.Oo Fl i\ \&
+.Sm off
+.Oo Ar if_ndx : Oc
+.Ar interface
+.Sm on
+.Oc
+.Ek
.Op Fl m Ar max_flows
.Op Fl n Ar host:port
.Op Fl p Ar pidfile
-.Op Fl c Ar ctl_sock
-.Op Fl L Ar hoplimit
-.Op Fl T Ar track_level
-.Op bpf_program
+.Op Fl r Ar pcap_file
+.Op Fl t Ar timeout_name=seconds
+.Op Fl v Ar netflow_version
+.Op Fl s Ar sampling_rate
+.Op bpf_expression
.Sh DESCRIPTION
.Nm
-is a software implementation of a flow-based network traffic monitor.
+is a software implementation of a flow-based network traffic monitor.
.Nm
-reads network traffic and gathers information about active traffic flows.
-A "traffic flow" is
-communication between two IP addresses or (if the overlying protocol is
-TCP or UDP) address/port tuples.
+reads network traffic and gathers information about active traffic flows.
+A "traffic flow" is communication between two IP addresses or (if the
+overlying protocol is TCP or UDP) address/port tuples.
.Pp
The intended use of
-.Nm
+.Nm
is as a software implementation of Cisco's NetFlow(tm) traffic account
system.
-.Nm
-supports data export using versions 1, 5 or 9 of the NetFlow protocol.
-.Nm
-can also run in statistics-only mode, where it just collects summary
+.Nm
+supports data export using versions 1, 5 or 9 of the NetFlow protocol.
+.Nm
+can also run in statistics-only mode, where it just collects summary
information.
However, too few statistics are collected to make this
mode really useful for anything other than debugging.
@@ -66,33 +72,33 @@
Network traffic may be obtained by listening on a promiscuous network
interface or by reading stored
.Xr pcap 3
-files, such as those written by
+files, such as those written by
.Xr tcpdump 8 .
Traffic may be filtered with an optional
.Xr bpf 4
program, specified on the command-line as
-.Ar bpf_prog .
+.Ar bpf_expression .
.Nm
-is IPv6 capable and will track IPv6 flows if the NetFlow export protocol
-supports it (currently only NetFlow v.9 possesses an IPv6 export capability).
+is IPv6 capable and will track IPv6 flows if the NetFlow export protocol
+supports it (currently only NetFlow v.9 possesses an IPv6 export capability).
.Pp
.Nm
tries to track only active traffic flows.
When the
-flow has been quiescent for a period of time it is expired automatically.
-Flows may also be expired early if they approach their traffic counts
-exceed 2Gb or if the number of flows being tracked exceeds
+flow has been quiescent for a period of time it is expired automatically.
+Flows may also be expired early if they approach their traffic counts
+exceed 2 Gib or if the number of flows being tracked exceeds
.Ar max_flows
(default: 8192).
-In this last case, flows are expired oldest-first.
+In this last case, flows are expired oldest-first.
.Pp
Upon expiry, the flow information is accumulated into statistics which may
-be viewed using
+be viewed using
.Xr softflowctl 8 .
-If the
+If the
.Fl n
-option has been specified the flow informaion is formatted in a UDP datagram
-which is compatible with versions 1, 5 or 9 of Cisco's NetFlow(tm) accounting
+option has been specified the flow information is formatted in a UDP datagram
+which is compatible with versions 1, 5 or 9 of Cisco's NetFlow(tm) accounting
export format.
These records are sent to the specified
.Ar host
@@ -103,52 +109,58 @@
The command-line options are as follows:
.Bl -tag -width Ds
.It Fl n Ar host:port
-Specify the
+Specify the
.Ar host
-and
+and
.Ar port
that the accounting datagrams are to be sent to.
-The host may be specified using a hostname or using a numeric IPv4 or
+The host may be specified using a hostname or using a numeric IPv4 or
IPv6 address.
Numeric IPv6 addresses should be encosed in square brackets to avoid ambiguity
between the address and the port.
-The destination port may be a portname listed in
+The destination port may be a portname listed in
.Xr services 5
or a numeric port.
-.It Fl i Ar interface
+.It Fl i Xo
+.Sm off
+.Oo Ar if_ndx : Oc
+.Ar interface
+.Sm on
+.Xc
Specify a network interface on which to listen for traffic.
-Either the
+Either the
.Fl i
or the
-.Fl r
+.Fl r
options must be specified.
.It Fl r Ar pcap_file
Specify that
.Nm
-should read from a
+should read from a
.Xr pcap 3
-packet capture (such as one created with the
+packet capture file (such as one created with the
.Fl w
-option of
+option of
.Xr tcpdump 8 )
-file rather than a network interface.
+file rather than a network interface.
.Nm
-processes the whole capture file and only expires flows when
+processes the whole capture file and only expires flows when
.Ar max_flows
-is exceeded. In this mode,
+is exceeded.
+In this mode,
.Nm
-will not fork and will automatically print summary statistics before
+will not fork and will automatically print summary statistics before
exiting.
.It Fl p Ar pidfile
-Specify an alternate location to store the process-id when in daemon mode.
-Default is
+Specify an alternate location to store the process ID when in daemon mode.
+Default is
.Pa /var/run/softflowd.pid
.It Fl c Ar ctlsock
Specify an alternate location for the remote control socket in daemon mode.
-Default is
-.Pa /var/run/softflowd.pid
+Default is
+.Pa /var/run/softflowd.ctl
.It Fl m Ar max_flows
-Specifies the maximum number of flow to concurrently track.
+Specify the maximum number of flows to concurrently track.
If this limit is exceeded, the flows which have least recently seen traffic
are forcibly expired.
In practice, the actual maximum may briefly exceed this limit by a
@@ -159,46 +171,46 @@
.It Fl t Ar timeout_name=time
Set the timeout names
.Ar timeout_name
-to
-.Ar time
-Refer to the
+to
+.Ar time .
+Refer to the
.Sx Timeouts
section for the valid timeout names and their meanings.
-The
+The
.Ar time
-parameter may be specified using one of the formats explained in the
+parameter may be specified using one of the formats explained in the
.Sx Time Formats
section below.
.It Fl d
-Specify that
+Specify that
.Nm
should not fork and daemonise itself.
.It Fl 6
-Forces
+Force
.Nm
-To track IPv6 flows even if the NetFlow export protocol does not support
+to track IPv6 flows even if the NetFlow export protocol does not support
reporting them.
This is useful for debugging and statistics gathering only.
.It Fl D
Places
.Nm
in a debugging mode.
-This implies the
+This implies the
.Fl d
and
.Fl 6
flags and turns on additional debugging output.
.It Fl h
-Displays commandline usage information.
+Display command-line usage information.
.It Fl L Ar hoplimit
-Sets the IPv4 TTL or the IPv6 hop limit to
+Set the IPv4 TTL or the IPv6 hop limit to
.Ar hoplimit .
.Nm
will use the default system TTL when exporting flows to a unicast host.
When exporting to a multicast group, the default TTL will be 1
(i.e. link-local).
.It Fl T Ar track_level
-Specifies what flow elements
+Specify which flow elements
.Nm
should be used to define a flow.
.Ar track_level
@@ -211,36 +223,43 @@
(only track source and destination addresses).
Selecting either of the latter options will produce flows with less information
in them (e.g. TCP/UDP ports will not be recorded).
-This will cause flows to be consolidated, reducing the quantity of output
+This will cause flows to be consolidated, reducing the quantity of output
and CPU load that
.Nm
-will place on the system at the cost of some detail.
+will place on the system at the cost of some detail being lost.
+.It Fl v Ar netflow_version
+Specify which version of the NetFlow(tm) protocol
+.Nm
+should use for export of the flow data.
+Supported versions are 1, 5 and 9.
+Default is version 5.
+.It Fl s Ar sampling_rate
+Specify periodical sampling rate (denominator).
.El
.Pp
-Any further commandline arguments will be concatenated together and
-applied as a
+Any further command-line arguments will be concatenated together and
+applied as a
.Xr bpf 4
packet filter.
-This filter will cause
+This filter will cause
.Nm
to ignore the specified traffic.
.Ss Timeouts
.Pp
.Nm
will expire quiescent flows after user-configurable periods.
-The exact
-timeout used depends on the nature of the flow.
-The various timeouts that may be set from the command-line (using the
-.Fl t
+The exact timeout used depends on the nature of the flow.
+The various timeouts that may be set from the command-line (using the
+.Fl t
option) and their meanings are:
.Bl -tag -width Ds
.It Ar general
-This is the general timeout applied to all traffic unless overridden by
+This is the general timeout applied to all traffic unless overridden by
one of the other timeouts.
.It Ar tcp
This is the general TCP timeout, applied to open TCP connections.
.It Ar tcp.rst
-This timeout is applied to a TCP connection when a RST packet has been
+This timeout is applied to a TCP connection when a RST packet has been
sent by one or both endpoints.
.It Ar tcp.fin
This timeout is applied to a TCP connection when a FIN packet has been
@@ -249,31 +268,30 @@
This is the general UDP timeout, applied to all UDP connections.
.It Ar maxlife
This is the maximum lifetime that a flow may exist for.
-All flows
-are forcibly expired when they pass
+All flows are forcibly expired when they pass
.Ar maxlife
seconds.
-To disable this feature, specify a
+To disable this feature, specify a
.Ar maxlife
of 0.
.It Ar expint
Specify the interval between expiry checks.
Increase this to group more flows into a NetFlow packet.
-To disable this feature, specify a
+To disable this feature, specify a
.Ar expint
of 0.
.El
.Pp
Flows may also be expired if there are not enough flow entries to hold them
-or if their traffic exceeds 2Gb in either direction.
+or if their traffic exceeds 2 Gib in either direction.
.Xr softflowctl 8
-may be used to print information on the average lifetimes of flows and
+may be used to print information on the average lifetimes of flows and
the reasons for their expiry.
.Ss Time Formats
.Pp
.Nm
-command-line arguments that specify time
-may be expressed using a sequence of the form:
+command-line arguments that specify time may be expressed using a sequence
+of the form:
.Sm off
.Ar time Op Ar qualifier ,
.Sm on
@@ -298,8 +316,7 @@
weeks
.El
.Pp
-Each member of the sequence is added together to calculate
-the total time value.
+Each member of the sequence is added together to calculate the total time value.
.Pp
Time format examples:
.Pp
@@ -315,88 +332,91 @@
.Pp
A daemonised
.Nm
-instance may be controlled using the
+instance may be controlled using the
.Xr softflowctl 8
command.
This interface allows one to shut down the daemon, force expiry of
all tracked flows and extract debugging and summary data.
-Also, upon
-receipt of a
+Also, receipt of a
.Dv SIGTERM
-or
-.DV SIGINT
+or
+.Dv SIGINT
+will cause
.Nm
-will cause
-.Nm
-to exit, after expiring all flows (and thus sending flow export packets
-if
-.Fl -n
-was specified on the commandline).
+to exit, after expiring all flows (and thus sending flow export packets
+if
+.Fl n
+was specified on the command-line).
If you do not want to export flows upon shutdown, clear them first with
-.Xr softflowctl 8 .
-
+.Xr softflowctl 8
+or use
+.Xr softflowctl 8 's
+.Dq exit
+command.
.Sh EXAMPLES
.Bl -tag -width Ds
.It softflowd -i fxp0
-This commandlie will cause
+This command-line will cause
.Nm
-to listen on interface \fBfxp0\fP and
-to run in statistics gathering mode only (i.e no NetFlow data export).
-.It softflowd -i fxp0 -n10.1.0.2:4432
-This commandlie will cause
-.Nm
-to listen on interface \fBfxp0\fP and
-to export NetFlow v.5 datagrams on flow expiry to a flow collector running
-on \fB10.1.0.2\fP port \fB4432\fP.
-.It softflowd -v 5 -i fxp0 -n10.1.0.2:4432 -m 65536 -t udp=1m30s
-This commandline increases the number of concurrent flows that
-.Nm
-will track to \fB65536\fP and increases the timeout for UDP flows to
-90 seconds.
-.It softflowd -v 9 -i fxp0 -n224.0.1.20:4432 -L 64
-This commandline will export NetFlow v.9 flows to the multicast group
+to listen on interface fxp0 and to run in statistics gathering mode
+only (i.e. no NetFlow data export).
+.It softflowd -i fxp0 -n 10.1.0.2:4432
+This command-line will cause
+.Nm
+to listen on interface fxp0 and to export NetFlow v.5 datagrams on flow
+expiry to a flow collector running on 10.1.0.2 port 4432.
+.It softflowd -v 5 -i fxp0 -n 10.1.0.2:4432 -m 65536 -t udp=1m30s
+This command-line increases the number of concurrent flows that
+.Nm
+will track to 65536 and increases the timeout for UDP flows to 90 seconds.
+.It softflowd -v 9 -i fxp0 -n 224.0.1.20:4432 -L 64
+This command-line will export NetFlow v.9 flows to the multicast group
224.0.1.20.
The export datagrams will have their TTL set to 64, so multicast receivers
can be many hops away.
.It softflowd -i fxp0 -p /var/run/sfd.pid.fxp0 -c /var/run/sfd.ctl.fxp0
-This commandline specifies alternate locations for the control socket
+This command-line specifies alternate locations for the control socket
and pid file.
-Similar commandlines are useful when running multiple
-instances of
+Similar command-lines are useful when running multiple
+instances of
.Nm
on a single machine.
.El
.Sh FILES
.Bl -tag -width Ds
.It Pa /var/run/softflowd.pid
-This file stores the process-id when
+This file stores the process ID when
.Nm
is in daemon mode.
-This location may be overridden using the
+This location may be overridden using the
.Fl p
command-line option.
.It Pa /var/run/softflowd.ctl
-This is the remote control socket.
-.Nm
-listens on this socket for commands from
-.Xr softflowctl 8 . This location may be overridden using the
+This is the remote control socket.
+.Nm
+listens on this socket for commands from
+.Xr softflowctl 8 .
+This location may be overridden using the
.Fl c
command-line option.
.El
.Sh BUGS
Currently
.Nm
-does not handle maliciously fragmented packets properly, i.e. packets
+does not handle maliciously fragmented packets properly, i.e. packets
fragemented such that the UDP or TCP header does not fit into the first
fragment.
-It will product correct traffic counts when presented with maliciously
+It will product correct traffic counts when presented with maliciously
fragmented packets, but will not record TCP or UDP port information.
.Sh AUTHORS
-Damien Miller <djm@mindrot.org>
+.An Damien Miller Aq djm@mindrot.org
.Sh SEE ALSO
.Xr softflowctl 8 ,
.Xr tcpdump 8 ,
.Xr pcap 3 ,
.Xr bpf 4
.Bd -literal
-http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/nfc/nfc_3_0/nfc_ug/nfcform.htm
+http://www.ietf.org/rfc/rfc3954.txt
+.br
+http://www.cisco.com/en/US/products/sw/netmgtsw/ps1964/products_implementation_design_guide09186a00800d6a11.html
+.Ed
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowd.c
^
|
| @@ -22,24 +22,23 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: softflowd.c,v 1.93 2006/11/02 06:23:29 djm Exp $ */
-
/*
- * This is software implementation of Cisco's NetFlow(tm) traffic
- * reporting system. It operates by listening (via libpcap) on a
- * promiscuous interface and tracking traffic flows.
+ * This is software implementation of Cisco's NetFlow(tm) traffic
+ * reporting system. It operates by listening (via libpcap) on a
+ * promiscuous interface and tracking traffic flows.
*
- * Traffic flows are recorded by source/destination/protocol IP address or, in the
- * case of TCP and UDP, by src_addr:src_port/dest_addr:dest_port/protocol
+ * Traffic flows are recorded by source/destination/protocol
+ * IP address or, in the case of TCP and UDP, by
+ * src_addr:src_port/dest_addr:dest_port/protocol
*
- * Flows expire automatically after a period of inactivity (default: 1 hour)
- * They may also be evicted (in order of age) in situations where there are
- * more flows than slots available.
+ * Flows expire automatically after a period of inactivity (default: 1
+ * hour) They may also be evicted (in order of age) in situations where
+ * there are more flows than slots available.
*
- * Netflow version 1 compatible packets are sent to a specified target
- * host upon flow expiry.
+ * Netflow compatible packets are sent to a specified target host upon
+ * flow expiry.
*
- * As this implementation watches traffic promiscuously, it is likely to
+ * As this implementation watches traffic promiscuously, it is likely to
* place significant load on hosts or gateways on which it is installed.
*/
@@ -48,16 +47,16 @@
#include "convtime.h"
#include "softflowd.h"
#include "treetype.h"
+#include "freelist.h"
#include "log.h"
#include <pcap.h>
-RCSID("$Id: softflowd.c,v 1.93 2006/11/02 06:23:29 djm Exp $");
-
/* Global variables */
static int verbose_flag = 0; /* Debugging flag */
+static u_int16_t if_index = 0; /* "manual" interface index */
/* Signal handler flags */
-static int graceful_shutdown_request = 0;
+static volatile sig_atomic_t graceful_shutdown_request = 0;
/* Context for libpcap callback functions */
struct CB_CTXT {
@@ -95,8 +94,8 @@
};
/* Netflow send functions */
-typedef int (netflow_send_func_t)(struct FLOW **, int, int, u_int64_t *,
- struct timeval *, int);
+typedef int (netflow_send_func_t)(struct FLOW **, int, int, u_int16_t,
+ u_int64_t *, struct timeval *, int, struct OPTION *);
struct NETFLOW_SENDER {
int version;
netflow_send_func_t *func;
@@ -126,7 +125,8 @@
static void sighand_other(int signum)
{
/* XXX: this may not be completely safe */
- logit(LOG_WARNING, "Exiting immediately on unexpected signal %d", signum);
+ logit(LOG_WARNING, "Exiting immediately on unexpected signal %d",
+ signum);
_exit(0);
}
@@ -194,6 +194,30 @@
EXPIRY_PROTOTYPE(EXPIRIES, EXPIRY, trp, expiry_compare);
EXPIRY_GENERATE(EXPIRIES, EXPIRY, trp, expiry_compare);
+static struct FLOW *
+flow_get(struct FLOWTRACK *ft)
+{
+ return freelist_get(&ft->flow_freelist);
+}
+
+static void
+flow_put(struct FLOWTRACK *ft, struct FLOW *flow)
+{
+ return freelist_put(&ft->flow_freelist, flow);
+}
+
+static struct EXPIRY *
+expiry_get(struct FLOWTRACK *ft)
+{
+ return freelist_get(&ft->expiry_freelist);
+}
+
+static void
+expiry_put(struct FLOWTRACK *ft, struct EXPIRY *expiry)
+{
+ return freelist_put(&ft->expiry_freelist, expiry);
+}
+
#if 0
/* Dump a packet */
static void
@@ -218,9 +242,9 @@
format_time(time_t t)
{
struct tm *tm;
- static char buf[20];
+ static char buf[32];
- tm = localtime(&t);
+ tm = gmtime(&t);
strftime(buf, sizeof(buf), "%Y-%m-%dT%H:%M:%S", tm);
return (buf);
@@ -231,7 +255,7 @@
static const char *
format_flow(struct FLOW *flow)
{
- char addr1[64], addr2[64], stime[20], ftime[20];
+ char addr1[64], addr2[64], stime[32], ftime[32];
static char buf[1024];
inet_ntop(flow->af, &flow->addr[0], addr1, sizeof(addr1));
@@ -242,7 +266,7 @@
snprintf(ftime, sizeof(ftime), "%s",
format_time(flow->flow_last.tv_sec));
- snprintf(buf, sizeof(buf), "seq:%llu [%s]:%hu <> [%s]:%hu proto:%u "
+ snprintf(buf, sizeof(buf), "seq:%"PRIu64" [%s]:%hu <> [%s]:%hu proto:%u "
"octets>:%u packets>:%u octets<:%u packets<:%u "
"start:%s.%03ld finish:%s.%03ld tcp>:%02x tcp<:%02x "
"flowlabel>:%08x flowlabel<:%08x ",
@@ -270,7 +294,7 @@
inet_ntop(flow->af, &flow->addr[1], addr2, sizeof(addr2));
snprintf(buf, sizeof(buf),
- "seq:%llu [%s]:%hu <> [%s]:%hu proto:%u",
+ "seq:%"PRIu64" [%s]:%hu <> [%s]:%hu proto:%u",
flow->flow_seq,
addr1, ntohs(flow->port[0]), addr2, ntohs(flow->port[1]),
(int)flow->protocol);
@@ -288,9 +312,9 @@
const struct icmp *icmp = (const struct icmp *)pkt;
/*
- * XXX to keep flow in proper canonical format, it may be necessary
- * to swap the array slots based on the order of the port numbers
- * does this matter in practice??? I don't think so - return flows will
+ * XXX to keep flow in proper canonical format, it may be necessary to
+ * swap the array slots based on the order of the port numbers does
+ * this matter in practice??? I don't think so - return flows will
* always match, because of their symmetrical addr/ports
*/
@@ -427,7 +451,7 @@
{
EXPIRY_REMOVE(EXPIRIES, &ft->expiries, flow->expiry);
- /* Flows over 2Gb traffic */
+ /* Flows over 2 GiB traffic */
if (flow->octets[0] > (1U << 31) || flow->octets[1] > (1U << 31)) {
flow->expiry->expires_at = 0;
flow->expiry->reason = R_OVERBYTES;
@@ -564,8 +588,8 @@
/* If a matching flow does not exist, create and insert one */
if ((flow = FLOW_FIND(FLOWS, &ft->flows, &tmp)) == NULL) {
/* Allocate and fill in the flow */
- if ((flow = malloc(sizeof(*flow))) == NULL) {
- logit(LOG_ERR, "process_packet: flow malloc(%u) fail",
+ if ((flow = flow_get(ft)) == NULL) {
+ logit(LOG_ERR, "process_packet: flow_get failed",
sizeof(*flow));
return (PP_MALLOC_FAIL);
}
@@ -576,8 +600,8 @@
FLOW_INSERT(FLOWS, &ft->flows, flow);
/* Allocate and fill in the associated expiry event */
- if ((flow->expiry = malloc(sizeof(*flow->expiry))) == NULL) {
- logit(LOG_ERR, "process_packet: expiry malloc(%u) fail",
+ if ((flow->expiry = expiry_get(ft)) == NULL) {
+ logit(LOG_ERR, "process_packet: expiry_get failed",
sizeof(*flow->expiry));
return (PP_MALLOC_FAIL);
}
@@ -589,7 +613,8 @@
ft->num_flows++;
if (verbose_flag)
- logit(LOG_DEBUG, "ADD FLOW %s", format_flow_brief(flow));
+ logit(LOG_DEBUG, "ADD FLOW %s",
+ format_flow_brief(flow));
} else {
/* Update flow statistics */
flow->packets[0] += tmp.packets[0];
@@ -782,7 +807,7 @@
if (verbose_flag)
logit(LOG_DEBUG,
- "Queuing flow seq:%llu (%p) for expiry "
+ "Queuing flow seq:%"PRIu64" (%p) for expiry "
"reason %d", expiry->flow->flow_seq,
expiry->flow, expiry->reason);
@@ -807,21 +832,22 @@
FLOW_REMOVE(FLOWS, &ft->flows, expiry->flow);
EXPIRY_REMOVE(EXPIRIES, &ft->expiries, expiry);
expiry->flow->expiry = NULL;
- free(expiry);
+ expiry_put(ft, expiry);
ft->num_flows--;
}
}
if (verbose_flag)
- logit(LOG_DEBUG, "Finished scan %d flow(s) to be evicted", num_expired);
+ logit(LOG_DEBUG, "Finished scan %d flow(s) to be evicted",
+ num_expired);
/* Processing for expired flows */
if (num_expired > 0) {
if (target != NULL && target->fd != -1) {
r = target->dialect->func(expired_flows, num_expired,
- target->fd, &ft->flows_exported,
- &ft->system_boot_time, verbose_flag);
+ target->fd, if_index, &ft->flows_exported,
+ &ft->system_boot_time, verbose_flag, &ft->option);
if (verbose_flag)
logit(LOG_DEBUG, "sent %d netflow packets", r);
if (r > 0) {
@@ -838,8 +864,7 @@
expired_flows[i]);
}
update_statistics(ft, expired_flows[i]);
-
- free(expired_flows[i]);
+ flow_put(ft, expired_flows[i]);
}
free(expired_flows);
@@ -923,10 +948,10 @@
FLOW_REMOVE(FLOWS, &ft->flows, flow);
EXPIRY_REMOVE(EXPIRIES, &ft->expiries, flow->expiry);
- free(flow->expiry);
+ expiry_put(ft, flow->expiry);
ft->num_flows--;
- free(flow);
+ flow_put(ft, flow);
i++;
}
@@ -947,13 +972,16 @@
struct pcap_stat ps;
fprintf(out, "Number of active flows: %d\n", ft->num_flows);
- fprintf(out, "Packets processed: %llu\n", ft->total_packets);
- fprintf(out, "Fragments: %llu\n", ft->frag_packets);
- fprintf(out, "Ignored packets: %llu (%llu non-IP, %llu too short)\n",
+ fprintf(out, "Packets processed: %"PRIu64"\n", ft->total_packets);
+ if (ft->non_sampled_packets)
+ fprintf(out, "Packets non-sampled: %"PRIu64"\n",
+ ft->non_sampled_packets);
+ fprintf(out, "Fragments: %"PRIu64"\n", ft->frag_packets);
+ fprintf(out, "Ignored packets: %"PRIu64" (%"PRIu64" non-IP, %"PRIu64" too short)\n",
ft->non_ip_packets + ft->bad_packets, ft->non_ip_packets, ft->bad_packets);
- fprintf(out, "Flows expired: %llu (%llu forced)\n",
+ fprintf(out, "Flows expired: %"PRIu64" (%"PRIu64" forced)\n",
ft->flows_expired, ft->flows_force_expired);
- fprintf(out, "Flows exported: %llu in %llu packets (%llu failures)\n",
+ fprintf(out, "Flows exported: %"PRIu64" in %"PRIu64" packets (%"PRIu64" failures)\n",
ft->flows_exported, ft->packets_sent, ft->flows_dropped);
if (pcap_stats(pcap, &ps) == 0) {
@@ -978,26 +1006,28 @@
fprintf(out, "\n");
fprintf(out, "Expired flow reasons:\n");
- fprintf(out, " tcp = %9llu tcp.rst = %9llu tcp.fin = %9llu\n",
- ft->expired_tcp, ft->expired_tcp_rst, ft->expired_tcp_fin);
- fprintf(out, " udp = %9llu icmp = %9llu general = %9llu\n",
- ft->expired_udp, ft->expired_icmp, ft->expired_general);
- fprintf(out, " maxlife = %9llu\n", ft->expired_maxlife);
- fprintf(out, " over 2Gb = %9llu\n", ft->expired_overbytes);
- fprintf(out, " maxflows = %9llu\n", ft->expired_maxflows);
- fprintf(out, " flushed = %9llu\n", ft->expired_flush);
+ fprintf(out, " tcp = %9"PRIu64" tcp.rst = %9"PRIu64" "
+ "tcp.fin = %9"PRIu64"\n", ft->expired_tcp, ft->expired_tcp_rst,
+ ft->expired_tcp_fin);
+ fprintf(out, " udp = %9"PRIu64" icmp = %9"PRIu64" "
+ "general = %9"PRIu64"\n", ft->expired_udp, ft->expired_icmp,
+ ft->expired_general);
+ fprintf(out, " maxlife = %9"PRIu64"\n", ft->expired_maxlife);
+ fprintf(out, "over 2 GiB = %9"PRIu64"\n", ft->expired_overbytes);
+ fprintf(out, " maxflows = %9"PRIu64"\n", ft->expired_maxflows);
+ fprintf(out, " flushed = %9"PRIu64"\n", ft->expired_flush);
fprintf(out, "\n");
- fprintf(out, "Per-protocol statistics: Octets Packets Avg Life Max Life\n");
+ fprintf(out, "Per-protocol statistics: Octets "
+ "Packets Avg Life Max Life\n");
for(i = 0; i < 256; i++) {
if (ft->packets_pp[i]) {
pe = getprotobynumber(i);
snprintf(proto, sizeof(proto), "%s (%d)",
pe != NULL ? pe->p_name : "Unknown", i);
- fprintf(out,
- " %17s: %14llu %12llu %8.2fs %10.2fs\n",
- proto,
+ fprintf(out, " %17s: %14"PRIu64" %12"PRIu64" %8.2fs "
+ "%10.2fs\n", proto,
ft->octets_pp[i],
ft->packets_pp[i],
ft->duration_pp[i].mean,
@@ -1021,12 +1051,12 @@
fprintf(out, "ACTIVE %s\n", format_flow(expiry->flow));
if ((long int) expiry->expires_at - now < 0) {
fprintf(out,
- "EXPIRY EVENT for flow %llu now%s\n",
+ "EXPIRY EVENT for flow %"PRIu64" now%s\n",
expiry->flow->flow_seq,
expiry->expires_at == 0 ? " (FORCED)": "");
} else {
fprintf(out,
- "EXPIRY EVENT for flow %llu in %ld seconds\n",
+ "EXPIRY EVENT for flow %"PRIu64" in %ld seconds\n",
expiry->flow->flow_seq,
(long int) expiry->expires_at - now);
}
@@ -1097,6 +1127,13 @@
struct CB_CTXT *cb_ctxt = (struct CB_CTXT *)user_data;
struct timeval tv;
+ if (cb_ctxt->ft->option.sample &&
+ (cb_ctxt->ft->total_packets +
+ cb_ctxt->ft->non_sampled_packets) %
+ cb_ctxt->ft->option.sample > 0) {
+ cb_ctxt->ft->non_sampled_packets++;
+ return;
+ }
s = datalink_check(cb_ctxt->linktype, pkt, phdr->caplen, &af);
if (s < 0 || (!cb_ctxt->want_v6 && af == AF_INET6)) {
cb_ctxt->ft->non_ip_packets++;
@@ -1164,7 +1201,8 @@
fprintf(ctlf, "\tsend-template\n");
ret = 0;
} else if (strcmp(buf, "shutdown") == 0) {
- fprintf(ctlf, "softflowd[%u]: Shutting down gracefully...\n", getpid());
+ fprintf(ctlf, "softflowd[%u]: Shutting down gracefully...\n",
+ getpid());
graceful_shutdown_request = 1;
ret = 1;
} else if (strcmp(buf, "exit") == 0) {
@@ -1186,8 +1224,9 @@
delete_all_flows(ft));
ret = 0;
} else if (strcmp(buf, "statistics") == 0) {
- fprintf(ctlf, "softflowd[%u]: Accumulated statistics:\n",
- getpid());
+ fprintf(ctlf, "softflowd[%u]: Accumulated statistics "
+ "since %s UTC:\n", getpid(),
+ format_time(ft->system_boot_time.tv_sec));
statistics(ft, ctlf, pcap);
ret = 0;
} else if (strcmp(buf, "debug+") == 0) {
@@ -1395,6 +1434,11 @@
FLOW_INIT(&ft->flows);
EXPIRY_INIT(&ft->expiries);
+ freelist_init(&ft->flow_freelist, sizeof(struct FLOW));
+ freelist_init(&ft->expiry_freelist, sizeof(struct EXPIRY));
+
+ ft->max_flows = DEFAULT_MAX_FLOWS;
+
ft->track_level = TRACK_FULL;
ft->tcp_timeout = DEFAULT_TCP_TIMEOUT;
@@ -1439,34 +1483,43 @@
static void
usage(void)
{
- fprintf(stderr, "Usage: %s [options] [bpf_program]\n", PROGNAME);
- fprintf(stderr, "This is %s version %s. Valid commandline options:\n", PROGNAME, PROGVER);
- fprintf(stderr, " -i interface Specify interface to listen on\n");
- fprintf(stderr, " -r pcap_file Specify packet capture file to read\n");
- fprintf(stderr, " -t timeout=time Specify named timeout\n");
- fprintf(stderr, " -m max_flows Specify maximum number of flows to track (default %d)\n", DEFAULT_MAX_FLOWS);
- fprintf(stderr, " -n host:port Send Cisco NetFlow(tm)-compatible packets to host:port\n");
- fprintf(stderr, " -p pidfile Record pid in specified file (default: %s)\n", DEFAULT_PIDFILE);
- fprintf(stderr, " -c pidfile Location of control socket (default: %s)\n", DEFAULT_CTLSOCK);
- fprintf(stderr, " -v 1|5|9 NetFlow export packet version\n");
- fprintf(stderr, " -L hoplimit Set TTL/hoplimit for export datagrams\n");
- fprintf(stderr, " -T full|proto|ip Set flow tracking level (default: full)\n");
- fprintf(stderr, " -6 Track IPv6 flows, regardless of whether selected \n"
- " NetFlow export protocol supports it\n");
- fprintf(stderr, " -d Don't daemonise\n");
- fprintf(stderr, " -D Debug mode: don't daemonise + verbosity + track v6 flows\n");
- fprintf(stderr, " -h Display this help\n");
- fprintf(stderr, "\n");
- fprintf(stderr, "Valid timeout names and default values:\n");
- fprintf(stderr, " tcp (default %6d)", DEFAULT_TCP_TIMEOUT);
- fprintf(stderr, " tcp.rst (default %6d)", DEFAULT_TCP_RST_TIMEOUT);
- fprintf(stderr, " tcp.fin (default %6d)\n", DEFAULT_TCP_FIN_TIMEOUT);
- fprintf(stderr, " udp (default %6d)", DEFAULT_UDP_TIMEOUT);
- fprintf(stderr, " icmp (default %6d)", DEFAULT_ICMP_TIMEOUT);
- fprintf(stderr, " general (default %6d)\n", DEFAULT_GENERAL_TIMEOUT);
- fprintf(stderr, " maxlife (default %6d)", DEFAULT_MAXIMUM_LIFETIME);
- fprintf(stderr, " expint (default %6d)\n", DEFAULT_EXPIRY_INTERVAL);
- fprintf(stderr, "\n");
+ fprintf(stderr,
+"Usage: %s [options] [bpf_program]\n"
+"This is %s version %s. Valid commandline options:\n"
+" -i [idx:]interface Specify interface to listen on\n"
+" -r pcap_file Specify packet capture file to read\n"
+" -t timeout=time Specify named timeout\n"
+" -m max_flows Specify maximum number of flows to track (default %d)\n"
+" -n host:port Send Cisco NetFlow(tm)-compatible packets to host:port\n"
+" -p pidfile Record pid in specified file\n"
+" (default: %s)\n"
+" -c pidfile Location of control socket\n"
+" (default: %s)\n"
+" -v 1|5|9 NetFlow export packet version\n"
+" -L hoplimit Set TTL/hoplimit for export datagrams\n"
+" -T full|proto|ip Set flow tracking level (default: full)\n"
+" -6 Track IPv6 flows, regardless of whether selected \n"
+" NetFlow export protocol supports it\n"
+" -d Don't daemonise (run in foreground)\n"
+" -D Debug mode: foreground + verbosity + track v6 flows\n"
+" -s sampling_rate Specify periodical sampling rate (denominator)\n"
+" -h Display this help\n"
+"\n"
+"Valid timeout names and default values:\n"
+" tcp (default %6d)"
+" tcp.rst (default %6d)"
+" tcp.fin (default %6d)\n"
+" udp (default %6d)"
+" icmp (default %6d)"
+" general (default %6d)\n"
+" maxlife (default %6d)"
+" expint (default %6d)\n"
+"\n" ,
+ PROGNAME, PROGNAME, PROGVER, DEFAULT_MAX_FLOWS, DEFAULT_PIDFILE,
+ DEFAULT_CTLSOCK, DEFAULT_TCP_TIMEOUT, DEFAULT_TCP_RST_TIMEOUT,
+ DEFAULT_TCP_FIN_TIMEOUT, DEFAULT_UDP_TIMEOUT, DEFAULT_ICMP_TIMEOUT,
+ DEFAULT_GENERAL_TIMEOUT, DEFAULT_MAXIMUM_LIFETIME,
+ DEFAULT_EXPIRY_INTERVAL);
}
static void
@@ -1633,8 +1686,8 @@
const char *pidfile_path, *ctlsock_path;
extern char *optarg;
extern int optind;
- int ch, dontfork_flag, linktype, ctlsock, i, r, err, always_v6;
- int max_flows, stop_collection_flag, exit_request, hoplimit;
+ int ch, dontfork_flag, linktype, ctlsock, i, err, always_v6, r;
+ int stop_collection_flag, exit_request, hoplimit;
pcap_t *pcap = NULL;
struct sockaddr_storage dest;
struct FLOWTRACK flowtrack;
@@ -1648,6 +1701,7 @@
init_flowtrack(&flowtrack);
memset(&dest, '\0', sizeof(dest));
+ dest_len = 0;
memset(&target, '\0', sizeof(target));
target.fd = -1;
target.dialect = &nf[0];
@@ -1655,12 +1709,12 @@
bpf_prog = NULL;
ctlsock = -1;
dev = capfile = NULL;
- max_flows = DEFAULT_MAX_FLOWS;
pidfile_path = DEFAULT_PIDFILE;
ctlsock_path = DEFAULT_CTLSOCK;
dontfork_flag = 0;
always_v6 = 0;
- while ((ch = getopt(argc, argv, "6hdDL:T:i:r:f:t:n:m:p:c:v:")) != -1) {
+
+ while ((ch = getopt(argc, argv, "6hdDL:T:i:r:f:t:n:m:p:c:v:s:")) != -1) {
switch (ch) {
case '6':
always_v6 = 1;
@@ -1677,15 +1731,23 @@
break;
case 'i':
if (capfile != NULL || dev != NULL) {
- fprintf(stderr, "Packet source already specified.\n\n");
+ fprintf(stderr, "Packet source already "
+ "specified.\n\n");
usage();
exit(1);
}
- dev = optarg;
+ dev = strsep(&optarg, ":");
+ if (optarg != NULL) {
+ if_index = (u_int16_t) atoi(dev);
+ dev = optarg;
+ }
+ if (verbose_flag)
+ fprintf(stderr, "Using %s (idx: %d)\n", dev, if_index);
break;
case 'r':
if (capfile != NULL || dev != NULL) {
- fprintf(stderr, "Packet source already specified.\n\n");
+ fprintf(stderr, "Packet source already "
+ "specified.\n\n");
usage();
exit(1);
}
@@ -1705,7 +1767,8 @@
else if (strcasecmp(optarg, "ip") == 0)
flowtrack.track_level = TRACK_IP_ONLY;
else {
- fprintf(stderr, "Unknown flow tracking level\n");
+ fprintf(stderr, "Unknown flow tracking "
+ "level\n");
usage();
exit(1);
}
@@ -1719,7 +1782,7 @@
}
break;
case 'm':
- if ((max_flows = atoi(optarg)) < 0) {
+ if ((flowtrack.max_flows = atoi(optarg)) < 0) {
fprintf(stderr, "Invalid maximum flows\n\n");
usage();
exit(1);
@@ -1751,6 +1814,12 @@
}
target.dialect = &nf[i];
break;
+ case 's':
+ flowtrack.option.sample = atoi(optarg);
+ if (flowtrack.option.sample < 2) {
+ flowtrack.option.sample = 0;
+ }
+ break;
default:
fprintf(stderr, "Invalid commandline option.\n");
usage();
@@ -1791,7 +1860,7 @@
} else {
FILE *pidfile;
- daemon(0, 0);
+ r = daemon(0, 0);
loginit(PROGNAME, 0);
if ((pidfile = fopen(pidfile_path, "w")) == NULL) {
@@ -1824,12 +1893,12 @@
cb_ctxt.ft = &flowtrack;
cb_ctxt.linktype = linktype;
cb_ctxt.want_v6 = target.dialect->v6_capable || always_v6;
- for(;;) {
+
+ for (r = 0; graceful_shutdown_request == 0; r = 0) {
/*
* Silly libpcap's timeout function doesn't work, so we
* do it here (only if we are reading live)
*/
- r = 0;
if (capfile == NULL) {
memset(pl, '\0', sizeof(pl));
@@ -1862,13 +1931,15 @@
/* If we have data, run it through libpcap */
if (!stop_collection_flag &&
(capfile != NULL || pl[0].revents != 0)) {
- r = pcap_dispatch(pcap, max_flows, flow_cb, (void*)&cb_ctxt);
+ r = pcap_dispatch(pcap, flowtrack.max_flows, flow_cb,
+ (void*)&cb_ctxt);
if (r == -1) {
logit(LOG_ERR, "Exiting on pcap_dispatch: %s",
pcap_geterr(pcap));
break;
- } else if (r == 0) {
- logit(LOG_NOTICE, "Shutting down after pcap EOF");
+ } else if (r == 0 && capfile != NULL) {
+ logit(LOG_NOTICE, "Shutting down after "
+ "pcap EOF");
graceful_shutdown_request = 1;
break;
}
@@ -1886,7 +1957,7 @@
* or whenever we have exceeded the maximum number of active
* flows
*/
- if (flowtrack.num_flows > max_flows ||
+ if (flowtrack.num_flows > flowtrack.max_flows ||
next_expire(&flowtrack) == 0) {
expiry_check:
/*
@@ -1895,15 +1966,17 @@
* expire flows when the flow table is full.
*/
if (check_expired(&flowtrack, &target,
- capfile == NULL ? CE_EXPIRE_NORMAL : CE_EXPIRE_FORCED) < 0)
+ capfile == NULL ? CE_EXPIRE_NORMAL :
+ CE_EXPIRE_FORCED) < 0)
logit(LOG_WARNING, "Unable to export flows");
/*
* If we are over max_flows, force-expire the oldest
* out first and immediately reprocess to evict them
*/
- if (flowtrack.num_flows > max_flows) {
- force_expire(&flowtrack, flowtrack.num_flows - max_flows);
+ if (flowtrack.num_flows > flowtrack.max_flows) {
+ force_expire(&flowtrack,
+ flowtrack.num_flows - flowtrack.max_flows);
goto expiry_check;
}
}
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowd.h
^
|
| @@ -27,6 +27,7 @@
#include "common.h"
#include "sys-tree.h"
+#include "freelist.h"
#include "treetype.h"
/* User to setuid to and directory to chroot to when we drop privs */
@@ -34,8 +35,9 @@
# define PRIVDROP_USER "nobody"
#endif
-#define PRIVDROP_CHROOT_DIR "/var/empty"
-
+#ifndef PRIVDROP_CHROOT_DIR
+# define PRIVDROP_CHROOT_DIR "/var/empty"
+#endif
/*
* Capture length for libpcap: Must fit the link layer header, plus
* a maximally sized ip/ipv6 header and most of a TCP header
@@ -72,6 +74,13 @@
#define TRACK_IP_ONLY 3 /* src/dst tuple */
/*
+ * This structure contains optional information carried by Option Data
+ * Record.
+ */
+struct OPTION {
+ uint32_t sample;
+};
+/*
* This structure is the root of the flow tracking system.
* It holds the root of the tree of active flows and the head of the
* tree of expiry events. It also collects miscellaneous statistics
@@ -81,7 +90,11 @@
FLOW_HEAD(FLOWS, FLOW) flows; /* Top of flow tree */
EXPIRY_HEAD(EXPIRIES, EXPIRY) expiries; /* Top of expiries tree */
+ struct freelist flow_freelist; /* Freelist for flows */
+ struct freelist expiry_freelist; /* Freelist for expiry events */
+
unsigned int num_flows; /* # of active flows */
+ unsigned int max_flows; /* Max # of active flows */
u_int64_t next_flow_seq; /* Next flow ID */
/* Stuff related to flow export */
@@ -100,6 +113,7 @@
/* Statistics */
u_int64_t total_packets; /* # of good packets */
+ u_int64_t non_sampled_packets; /* # of not sampled packets */
u_int64_t frag_packets; /* # of fragmented packets */
u_int64_t non_ip_packets; /* # of not-IP packets */
u_int64_t bad_packets; /* # of bad packets */
@@ -129,6 +143,9 @@
u_int64_t expired_overbytes;
u_int64_t expired_maxflows;
u_int64_t expired_flush;
+
+ /* Optional information */
+ struct OPTION option;
};
/*
@@ -195,14 +212,14 @@
/* Prototypes for functions to send NetFlow packets, from netflow*.c */
int send_netflow_v1(struct FLOW **flows, int num_flows, int nfsock,
- u_int64_t *flows_exported, struct timeval *system_boot_time,
- int verbose_flag);
+ u_int16_t ifidx, u_int64_t *flows_exported, struct timeval *system_boot_time,
+ int verbose_flag, struct OPTION *option);
int send_netflow_v5(struct FLOW **flows, int num_flows, int nfsock,
- u_int64_t *flows_exported, struct timeval *system_boot_time,
- int verbose_flag);
+ u_int16_t ifidx, u_int64_t *flows_exported, struct timeval *system_boot_time,
+ int verbose_flag, struct OPTION *option);
int send_netflow_v9(struct FLOW **flows, int num_flows, int nfsock,
- u_int64_t *flows_exported, struct timeval *system_boot_time,
- int verbose_flag);
+ u_int16_t ifidx, u_int64_t *flows_exported, struct timeval *system_boot_time,
+ int verbose_flag, struct OPTION *option);
/* Force a resend of the flow template */
void netflow9_resend_template(void);
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowd.init
^
|
| @@ -1,7 +1,6 @@
#!/bin/bash
#
# softflowd Starts softflowd NetFlow probe
-# $Id: softflowd.init,v 1.1 2006/03/14 23:15:41 djm Exp $
#
# chkconfig: 2345 95 02
# description: Starts and stops the softflowd Netflow probe
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/softflowd.spec
^
|
| @@ -1,11 +1,9 @@
-# $Id: softflowd.spec,v 1.1 2006/03/14 23:15:41 djm Exp $
-
# Figure out release tag (e.g. rhel3, fc1) based on redhat-release file
%global _RHTAG %(sed 's/(.*)//;s/ [A-Z]* //;s/[a-z ]*//g' /etc/redhat-release | tr '[:upper:]' '[:lower:]')
Name: softflowd
Summary: Network traffic analyser capable of Cisco NetFlow data export
-Version: 0.9.8
+Version: 0.9.9
Release: 1.%{_RHTAG}
Source: softflowd-%{version}.tar.gz
Group: System/Utilities
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/strlcat.c
^
|
| @@ -21,8 +21,6 @@
#include "common.h"
#ifndef HAVE_STRLCAT
-RCSID("$Id: strlcat.c,v 1.1 2004/09/10 09:08:08 djm Exp $");
-
#if defined(LIBC_SCCS) && !defined(lint)
static char *rcsid = "$OpenBSD: strlcat.c,v 1.11 2003/06/17 21:56:24 millert Exp $";
#endif /* LIBC_SCCS and not lint */
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/strlcpy.c
^
|
| @@ -22,8 +22,6 @@
#ifndef HAVE_STRLCPY
-RCSID("$Id: strlcpy.c,v 1.1 2004/09/10 09:08:08 djm Exp $");
-
#if defined(LIBC_SCCS) && !defined(lint)
static char *rcsid = "$OpenBSD: strlcpy.c,v 1.8 2003/06/17 21:56:24 millert Exp $";
#endif /* LIBC_SCCS and not lint */
|
|
[-]
[+]
|
Changed |
softflowd-0.9.9.tar.bz2/treetype.h
^
|
| @@ -22,8 +22,6 @@
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* $Id: treetype.h,v 1.1 2003/11/09 00:38:08 djm Exp $ */
-
/* Select our tree types for various data structures */
#if defined(FLOW_RB)
|
