Changes - j0ke.net Open Build Service

Changes of Revision 7

[-] [+]	Added	pmacctd.init
@@ -0,0 +1,262 @@ +#! /bin/sh +# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany. +# All rights reserved. +# +# Author: Peter Nixon http://peternixon.net +# +# /etc/init.d/pmacctd +# and its symbolic link +# /(usr/)sbin/rcpmacctd +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# LSB compatible service control script; see http://www.linuxbase.org/spec/ +# +### BEGIN INIT INFO +# Provides: pmacctd +# Required-Start: $syslog $network $remote_fs +# Should-Start: $time postgresql mysql +# Required-Stop: $syslog $remote_fs +# Should-Stop: $time +# Default-Start: 3 5 +# Default-Stop: 0 1 2 6 +# Short-Description: pmacctd daemon providing Promiscious Mode Accounting services +# Description: Start pmacctd to collect Promiscious Mode Accounting data on local interfaces +### END INIT INFO +# +# Any extensions to the keywords given above should be preceeded by +# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB. +# +# Notes on Required-Start/Should-Start: +# * There are two different issues that are solved by Required-Start +# and Should-Start +# (a) Hard dependencies: This is used by the runlevel editor to determine +# which services absolutely need to be started to make the start of +# this service make sense. Example: nfsserver should have +# Required-Start: $portmap +# Also, required services are started before the dependent ones. +# The runlevel editor will warn about such missing hard dependencies +# and suggest enabling. During system startup, you may expect an error, +# if the dependency is not fulfilled. +# (b) Specifying the init script ordering, not real (hard) dependencies. +# This is needed by insserv to determine which service should be +# started first (and at a later stage what services can be started +# in parallel). The tag Should-Start: is used for this. +# It tells, that if a service is available, it should be started +# before. If not, never mind. +# * When specifying hard dependencies or ordering requirements, you can +# use names of services (contents of their Provides: section) +# or pseudo names starting with a $. The following ones are available +# according to LSB (1.1): +# $local_fs all local file systems are mounted +# (most services should need this!) +# $remote_fs all remote file systems are mounted +# (note that /usr may be remote, so +# many services should Require this!) +# $syslog system logging facility up +# $network low level networking (eth card, ...) +# $named hostname resolution available +# $netdaemons all network daemons are running +# The $netdaemons pseudo service has been removed in LSB 1.2. +# For now, we still offer it for backward compatibility. +# These are new (LSB 1.2): +# $time the system time has been set correctly +# $portmap SunRPC portmapping service available +# UnitedLinux extensions: +# $ALL indicates that a script should be inserted +# at the end +# * The services specified in the stop tags +# (Required-Stop/Should-Stop) +# specify which services need to be still running when this service +# is shut down. Often the entries there are just copies or a subset +# from the respective start tag. +# * Should-Start/Stop are now part of LSB as of 2.0, +# formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop. +# insserv does support both variants. +# * X-UnitedLinux-Default-Enabled: yes/no is used at installation time +# (%fillup_and_insserv macro in %post of many RPMs) to specify whether +# a startup script should default to be enabled after installation. +# It's not used by insserv. +# +# Note on runlevels: +# 0 - halt/poweroff 6 - reboot +# 1 - single user 2 - multiuser without network exported +# 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm) +# +# Note on script names: +# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html +# A registry has been set up to manage the init script namespace. +# http://www.lanana.org/ +# Please use the names already registered or register one or use a +# vendor prefix. + + +# Check for missing binaries (stale symlinks should not happen) +# Note: Special treatment of stop for LSB conformance +PMACCTD_BIN=/usr/sbin/pmacctd +test -x $PMACCTD_BIN \|\| { echo "$PMACCTD_BIN not installed"; + if [ "$1" = "stop" ]; then exit 0; + else exit 5; fi; } + +# Check for existence of needed config file and read it +PMACCTD_CONFIG=/etc/pmacct/pmacctd.conf +test -r $PMACCTD_CONFIG \|\| { echo "$PMACCTD_CONFIG not existing"; + if [ "$1" = "stop" ]; then exit 0; + else exit 6; fi; } + +# Read config +#. $PMACCTD_CONFIG + +# Source LSB init functions +# providing start_daemon, killproc, pidofproc, +# log_success_msg, log_failure_msg and log_warning_msg. +# This is currently not used by UnitedLinux based distributions and +# not needed for init scripts for UnitedLinux only. If it is used, +# the functions from rc.status should not be sourced or used. +#. /lib/lsb/init-functions + +# Shell functions sourced from /etc/rc.status: +# rc_check check and set local and overall rc status +# rc_status check and set local and overall rc status +# rc_status -v be verbose in local rc status and clear it afterwards +# rc_status -v -r ditto and clear both the local and overall rc status +# rc_status -s display "skipped" and exit with status 3 +# rc_status -u display "unused" and exit with status 3 +# rc_failed set local and overall rc status to failed +# rc_failed <num> set local and overall rc status to <num> +# rc_reset clear both the local and overall rc status +# rc_exit exit appropriate to overall rc status +# rc_active checks whether a service is activated by symlinks +. /etc/rc.status + +# Reset status of this service +rc_reset + +# Return values acc. to LSB for all commands but status: +# 0 - success +# 1 - generic or unspecified error +# 2 - invalid or excess argument(s) +# 3 - unimplemented feature (e.g. "reload") +# 4 - user had insufficient privileges +# 5 - program is not installed +# 6 - program is not configured +# 7 - program is not running +# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) +# +# Note that starting an already running service, stopping +# or restarting a not-running service as well as the restart +# with force-reload (in case signaling is not supported) are +# considered a success. + +case "$1" in + start) + echo -n "Starting pmacctd " + ## Start daemon with startproc(8). If this fails + ## the return value is set appropriately by startproc. + /sbin/startproc $PMACCTD_BIN -f $PMACCTD_CONFIG + + # Remember status and be verbose + rc_status -v + ;; + stop) + echo -n "Shutting down pmacctd " + ## Stop daemon with killproc(8) and if this fails + ## killproc sets the return value according to LSB. + + /sbin/killproc -TERM $PMACCTD_BIN + + # Remember status and be verbose + rc_status -v + ;; + try-restart\|condrestart) + ## Do a restart only if the service was active before. + ## Note: try-restart is now part of LSB (as of 1.9). + ## RH has a similar command named condrestart. + if test "$1" = "condrestart"; then + echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" + fi + $0 status + if test $? = 0; then + $0 restart + else + rc_reset # Not running is not a failure. + fi + # Remember status and be quiet + rc_status + ;; + restart)