|
[-]
[+]
|
Changed |
check_openmanage.changes
|
|
|
|
[-]
[+]
|
Changed |
check_openmanage.spec
^
|
|
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/CHANGES
^
|
| @@ -1,3 +1,21 @@
+3.7.0 2011-08-15
+------------------
+
+* Major overhaul of the perfdata code. This includes API breakage and
+ fixes the following:
+ - Probes were not sorted correctly
+ - Voltage data was not included
+* The PNP template check_openmanage.php has been redone to work with
+ the changes in perfdata output from the plugin
+* A new option '--legacy-perfdata' will make the the plugin output the
+ performance data in the old format
+* Added support for a configuration file
+* Added manual page for the configuration file
+* If using html output, URLs will now open in a new window
+* Added a compatibility fix for OMSA 6.5.0, related to performance
+ data for amperage probes when the plugin is used in local
+ mode. Thanks to Benedikt Meyer for a patch.
+
3.6.8 2011-06-07
------------------
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/INSTALL
^
|
| @@ -10,11 +10,13 @@
-------------------
To install check_openmanage, copy the file check_openmanage to the
-Nagios plugin directory (usually /usr/lib/nagios/plugins):
+Nagios plugin directory (usually /usr/lib/nagios/plugins for 32bit or
+/usr/lib64/nagios/plugins for 64bit):
cp check_openmanage /usr/lib/nagios/plugins
-To install the manual page:
+To install the manual pages:
cp check_openmanage.8 /usr/share/man/man8
+ cp check_openmanage.conf.5 /usr/share/man/man5
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/README
^
|
| @@ -6,8 +6,10 @@
check_openmanage - The plugin
check_openmanage.exe - Win32 standalone executable
- check_openmanage.8 - Man page
- check_openmanage.pod - Man page source
+ check_openmanage.8 - Program man page
+ check_openmanage.conf.5 - Config file man page
+ check_openmanage.pod - Program man page source
+ check_openmanage.conf.pod - Config file man page source
check_openmanage.php - PNP4Nagios template
nagios-plugins-check-openmanage.spec - RPM spec file
COPYING - License information
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/check_openmanage
^
|
| @@ -5,7 +5,7 @@
# Monitor Dell server hardware status using Dell OpenManage Server
# Administrator, either locally via NRPE, or remotely via SNMP.
#
-# $Id: check_openmanage 19355 2011-02-09 13:50:00Z trondham $
+# $Id: check_openmanage 20643 2011-08-15 11:45:29Z trondham $
#
# Copyright (C) 2008-2011 Trond H. Amundsen
#
@@ -51,7 +51,7 @@
# Version and similar info
$NAME = 'check_openmanage';
-$VERSION = '3.6.8';
+$VERSION = '3.7.0';
$AUTHOR = 'Trond H. Amundsen';
$CONTACT = 't.h.amundsen@usit.uio.no';
@@ -74,10 +74,12 @@
GENERAL OPTIONS:
+ -f, --config Specify configuration file
-p, --perfdata Output performance data [default=no]
-t, --timeout Plugin timeout in seconds [default=30]
-c, --critical Custom temperature critical limits
-w, --warning Custom temperature warning limits
+ -F, --fahrenheit Use Fahrenheit as temperature unit
-d, --debug Debug output, reports everything
-h, --help Display this help text
-V, --version Display version info
@@ -97,7 +99,7 @@
-e, --extinfo Append system info to alerts
-s, --state Prefix alerts with alert state
-S, --short-state Prefix alerts with alert state abbreviated
- -o, --ok-info Verbosity when check result is OK
+ -o, --okinfo Verbosity when check result is OK
-B, --show-blacklist Show blacklistings in OK output
-I, --htmlinfo HTML output with clickable links
@@ -129,10 +131,14 @@
'check' => [], # check control
'critical' => [], # temperature critical limits
'warning' => [], # temperature warning limits
+ 'tempunit' => 'C', # temperature unit
+ 'fahrenheit' => 0, # Use fahrenheit
+ 'configfile' => undef, # configuration file
'timeout' => 30, # default timeout is 30 seconds
'debug' => 0, # debugging / verbose output
'help' => 0, # display help output
'perfdata' => undef, # output performance data
+ 'legacy_perfdata' => 0, # legacy performance data output
'info' => 0, # display servicetag
'extinfo' => 0, # display extra info
'htmlinfo' => undef, # html tags in output
@@ -168,11 +174,15 @@
'check=s' => \@{ $opt{check} },
'c|critical=s' => \@{ $opt{critical} },
'w|warning=s' => \@{ $opt{warning} },
+ 'tempunit=s' => \$opt{tempunit},
+ 'F|fahrenheit' => \$opt{fahrenheit},
+ 'f|configfile=s' => \$opt{configfile},
't|timeout=i' => \$opt{timeout},
'd|debug' => \$opt{debug},
'h|help' => \$opt{help},
'V|version' => \$opt{version},
'p|perfdata:s' => \$opt{perfdata},
+ 'legacy-perfdata' => \$opt{legacy_perfdata},
'i|info' => \$opt{info},
'e|extinfo' => \$opt{extinfo},
'I|htmlinfo:s' => \$opt{htmlinfo},
@@ -214,6 +224,34 @@
exit $E_UNKNOWN;
}
+# Initialize blacklist
+%blacklist = ();
+
+# Check flags, override available with the --check option
+%check = ( 'storage' => 1, # check storage subsystem
+ 'memory' => 1, # check memory (dimms)
+ 'fans' => 1, # check fan status
+ 'power' => 1, # check power supplies
+ 'temp' => 1, # check temperature
+ 'cpu' => 1, # check processors
+ 'voltage' => 1, # check voltage
+ 'batteries' => 1, # check battery probes
+ 'amperage' => 1, # check power consumption
+ 'intrusion' => 1, # check intrusion detection
+ 'sdcard' => 1, # check removable flash media (SD cards)
+ 'alertlog' => 0, # check the alert log
+ 'esmlog' => 0, # check the ESM log (hardware log)
+ 'esmhealth' => 1, # check the ESM log overall health
+ );
+
+# Messages
+@report_storage = (); # messages with associated nagios level (storage)
+@report_chassis = (); # messages with associated nagios level (chassis)
+@report_other = (); # messages with associated nagios level (other)
+
+# Read config file
+parse_configfile() if defined $opt{configfile};
+
# Setting timeout
$SIG{ALRM} = sub {
print "PLUGIN TIMEOUT: $NAME timed out after $opt{timeout} seconds\n";
@@ -231,23 +269,6 @@
# The omreport command
$omreport = undef;
-# Check flags, override available with the --check option
-%check = ( 'storage' => 1, # check storage subsystem
- 'memory' => 1, # check memory (dimms)
- 'fans' => 1, # check fan status
- 'power' => 1, # check power supplies
- 'temp' => 1, # check temperature
- 'cpu' => 1, # check processors
- 'voltage' => 1, # check voltage
- 'batteries' => 1, # check battery probes
- 'amperage' => 1, # check power consumption
- 'intrusion' => 1, # check intrusion detection
- 'sdcard' => 1, # check removable flash media (SD cards)
- 'alertlog' => 0, # check the alert log
- 'esmlog' => 0, # check the ESM log (hardware log)
- 'esmhealth' => 1, # check the ESM log overall health
- );
-
# Default line break
$linebreak = isatty(*STDOUT) ? "\n" : '<br/>';
@@ -271,49 +292,44 @@
}
# List of controllers and enclosures
-@controllers = (); # controllers
-@enclosures = (); # enclosures
-%snmp_enclosure = (); # enclosures
-
-# Messages
-@report_storage = (); # messages with associated nagios level (storage)
-@report_chassis = (); # messages with associated nagios level (chassis)
-@report_other = (); # messages with associated nagios level (other)
+@controllers = (); # controllers
+@enclosures = (); # enclosures
+%snmp_enclosure = (); # enclosures
# Counters for everything
%count
= (
- 'pdisk' => 0, # number of physical disks
- 'vdisk' => 0, # number of logical drives (virtual disks)
- 'temp' => 0, # number of temperature probes
- 'volt' => 0, # number of voltage probes
- 'amp' => 0, # number of amperage probes
- 'intr' => 0, # number of intrusion probes
- 'dimm' => 0, # number of memory modules
- 'mem' => 0, # total memory
- 'fan' => 0, # number of fan probes
- 'cpu' => 0, # number of CPUs
- 'bat' => 0, # number of batteries
- 'power' => 0, # number of power supplies
- 'sd' => 0, # number of SD cards
- 'esm' => {
- 'Critical' => 0, # critical entries in ESM log
- 'Non-Critical' => 0, # warning entries in ESM log
- 'Ok' => 0, # ok entries in ESM log
- },
- 'alert' => {
- 'Critical' => 0, # critical entries in alert log
- 'Non-Critical' => 0, # warning entries in alert log
- 'Ok' => 0, # ok entries in alert log
- },
+ 'pdisk' => 0, # number of physical disks
+ 'vdisk' => 0, # number of logical drives (virtual disks)
+ 'temp' => 0, # number of temperature probes
+ 'volt' => 0, # number of voltage probes
+ 'amp' => 0, # number of amperage probes
+ 'intr' => 0, # number of intrusion probes
+ 'dimm' => 0, # number of memory modules
+ 'mem' => 0, # total memory
+ 'fan' => 0, # number of fan probes
+ 'cpu' => 0, # number of CPUs
+ 'bat' => 0, # number of batteries
+ 'power' => 0, # number of power supplies
+ 'sd' => 0, # number of SD cards
+ 'esm' => {
+ 'Critical' => 0, # critical entries in ESM log
+ 'Non-Critical' => 0, # warning entries in ESM log
+ 'Ok' => 0, # ok entries in ESM log
+ },
+ 'alert' => {
+ 'Critical' => 0, # critical entries in alert log
+ 'Non-Critical' => 0, # warning entries in alert log
+ 'Ok' => 0, # ok entries in alert log
+ },
);
# Performance data
@perfdata = ();
# Global health status
-$global = 1; # default is to check global status
-$globalstatus = $E_OK; # default global health status is "OK"
+$global = 1; # default is to check global status
+$globalstatus = $E_OK; # default global health status is "OK"
# Nagios error levels reversed
%reverse_exitcode
@@ -398,7 +414,7 @@
adjust_checks() if defined $opt{check};
# Blacklisted components
-%blacklist = defined $opt{blacklist} ? %{ get_blacklist() } : ();
+set_blacklist($opt{blacklist}) if defined $opt{blacklist};
# If blacklisting is in effect, don't check global health status
if (scalar keys %blacklist > 0) {
@@ -424,11 +440,355 @@
check_omreport_options();
}
+# Temperature unit
+if ($opt{fahrenheit}) {
+ $opt{tempunit} = 'F';
+}
+
+# Check tempunit syntax
+if ($opt{tempunit} !~ m{\A C|F|K|R \z}xms) {
+ print "ERROR: Unknown temperature unit '$opt{tempunit}'\n";
+ exit $E_UNKNOWN;
+}
#---------------------------------------------------------------------
# Helper functions
#---------------------------------------------------------------------
+# Make a regex from a glob pattern. Shamelessly stolen from Perl
+# Cookbook chapter 6.9
+sub glob2regex {
+ my $globstr = shift;
+ my %patmap
+ = ( '*' => '.*',
+ '?' => '.',
+ '[' => '[',
+ ']' => ']',
+ );
+ $globstr =~ s{(.)} { $patmap{$1} || "\Q$1" }ge;
+ return '\A' . $globstr . '\z';
+}
+
+#
+# Read config file
+#
+sub parse_configfile {
+ our $tiny = undef;
+
+ # Regexp for boolean values
+ our $off = qr{\A (0|off|false) \s* \z}ixms;
+ our $on = qr{\A (1|on|true) \s* \z}ixms;
+
+ # Mapping between command line options and the corresponding
+ # config file options
+ our %opt2config
+ = ( 'info' => 'output_servicetag',
+ 'extinfo' => 'output_sysinfo',
+ 'postmsg' => 'output_post_message',
+ 'state' => 'output_servicestate',
+ 'shortstate' => 'output_servicestate_abbr',
+ 'show_blacklist' => 'output_blacklist',
+ 'htmlinfo' => 'output_html',
+ 'okinfo' => 'output_ok_verbosity',
+ 'protocol' => 'snmp_version',
+ 'community' => 'snmp_community',
+ 'port' => 'snmp_port',
+ 'ipv6' => 'snmp_use_ipv6',
+ 'tcp' => 'snmp_use_tcp',
+ 'warning' => 'temp_threshold_warning',
+ 'critical' => 'temp_threshold_critical',
+ 'all' => 'check_everything',
+ 'perfdata' => 'performance_data',
+ 'tempunit' => 'temperature_unit',
+ 'timeout' => 'timeout',
+ 'blacklist' => 'blacklist',
+ 'legacy_perfdata' => 'legacy_performance_data',
+ );
+
+ # Load the perl module
+ if ( eval { require Config::Tiny; 1 } ) {
+ $tiny = Config::Tiny->new();
+ }
+ else {
+ print "ERROR: Required perl module 'Config::Tiny' not found\n";
+ exit $E_UNKNOWN;
+ }
+
+ # Read the config file
+ $tiny = Config::Tiny->read($opt{configfile})
+ or do { report('other', (sprintf q{Couldn't read configuration file: %s}, Config::Tiny->errstr()), $E_UNKNOWN);
+ return; };
+
+ # Syntax check
+ foreach my $section (keys %{ $tiny }) {
+ KEYWORD:
+ foreach my $keyword (keys %{ $tiny->{$section} }) {
+ next KEYWORD if $keyword eq 'check_everything';
+ if ($keyword =~ m{\A check_(.+)}xms) {
+ my $c = $1;
+ foreach my $cl (keys %check) {
+ next KEYWORD if $c eq $cl;
+ }
+ }
+ else {
+ LEGAL:
+ foreach my $legal (keys %opt2config) {
+ next KEYWORD if $keyword eq $opt2config{$legal};
+ }
+ }
+ if ($section eq '_') {
+ report('other', qq{CONFIG ERROR: In the global section: Unknown statement "$keyword"}, $E_UNKNOWN);
+ }
+ else {
+ report('other', qq{CONFIG ERROR: Unknown statement "$keyword" in section "$section"}, $E_UNKNOWN);
+ }
+ }
+ }
+
+ # Adjust checks according to statements in the configuration file
+ sub configfile_adjust_checks {
+ my $keyword = shift;
+ CHECK_CONFIG:
+ foreach my $key (keys %check) {
+ my $copt = join '_', 'check', $key;
+ next CHECK_CONFIG if !defined $tiny->{$keyword}->{$copt} or $tiny->{$keyword}->{$copt} eq q{};
+ if ($tiny->{$keyword}->{$copt} =~ m{$on}ixms) {
+ $check{$key} = 1;
+ }
+ elsif ($tiny->{$keyword}->{$copt} =~ m{$off}ixms) {
+ $check{$key} = 0;
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$copt' must be boolean (True/False)", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set blacklist according to statements in the configuration file
+ sub configfile_set_blacklist {
+ my $keyword = shift;
+ if (defined $tiny->{$keyword}->{blacklist} and $tiny->{$keyword}->{blacklist} ne q{}) {
+ # set_blacklist() takes an array ref
+ set_blacklist([$tiny->{$keyword}->{blacklist}]);
+ }
+ return;
+ }
+
+ # Set timeout according to statements in the configuration file
+ sub configfile_set_timeout {
+ my $keyword = shift;
+ if (defined $tiny->{$keyword}->{timeout} and $tiny->{$keyword}->{timeout} ne q{}) {
+ if ($tiny->{$keyword}->{timeout} =~ m{\A \d+ \z}xms) { # integer
+ $opt{timeout} = $tiny->{$keyword}->{timeout};
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for 'timeout' must be a positive integer", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set a boolean option
+ sub configfile_set_boolean {
+ my ($keyword, $bool) = @_;
+ my $cbool = $opt2config{$bool};
+ if (defined $tiny->{$keyword}->{$cbool} and $tiny->{$keyword}->{$cbool} ne q{}) {
+ if ($tiny->{$keyword}->{$cbool} =~ m{$on}ixms) {
+ $opt{$bool} = 1;
+ }
+ elsif ($tiny->{$keyword}->{$cbool} =~ m{$off}ixms) {
+ $opt{$bool} = 0;
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$cbool' must be boolean (True/False)", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set htmlinfo option from config file
+ sub configfile_set_htmlinfo {
+ my $keyword = shift;
+ my $conf = $opt2config{htmlinfo};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ if ($tiny->{$keyword}->{$conf} =~ m{$on}ixms) {
+ $opt{htmlinfo} = 1;
+ }
+ elsif ($tiny->{$keyword}->{$conf} =~ m{$off}ixms) {
+ $opt{htmlinfo} = undef;
+ }
+ else {
+ $opt{htmlinfo} = $tiny->{$keyword}->{$conf};
+ }
+ }
+ return;
+ }
+
+ # Set OK output verbosity
+ sub configfile_set_ok_verbosity {
+ my $keyword = shift;
+ my $conf = $opt2config{okinfo};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ if ($tiny->{$keyword}->{$conf} =~ m{\A \d+ \z}xms) {
+ $opt{okinfo} = $tiny->{$keyword}->{$conf};
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$conf' must be a positive integer", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set SNMP protocol version from config file
+ sub configfile_set_snmp_version {
+ my $keyword = shift;
+ my $conf = $opt2config{protocol};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ if ($tiny->{$keyword}->{$conf} =~ m{\A 1|2|3 \z}xms) {
+ $opt{protocol} = $tiny->{$keyword}->{$conf};
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$conf' must be '1', '2' or '3'", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set SNMP community name from config file
+ sub configfile_set_snmp_community {
+ my $keyword = shift;
+ my $conf = $opt2config{community};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ $opt{community} = $tiny->{$keyword}->{$conf};
+ }
+ return;
+ }
+
+ # Set SNMP port number from config file
+ sub configfile_set_snmp_port {
+ my $keyword = shift;
+ my $conf = $opt2config{port};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ if ($tiny->{$keyword}->{$conf} =~ m{\A \d+ \z}xms) { # integer
+ $opt{port} = $tiny->{$keyword}->{$conf};
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$conf' must be a positive integer", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set temperature threshold from config file
+ sub configfile_set_temp_threshold {
+ my $keyword = shift;
+ my $level = shift;
+ my $conf = $opt2config{$level};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ $opt{$level} = [$tiny->{$keyword}->{$conf}]; # array ref
+ }
+ return;
+ }
+
+ # Set perfdata from config file
+ sub configfile_set_perfdata {
+ my $keyword = shift;
+ my $conf = $opt2config{perfdata};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ if ($tiny->{$keyword}->{$conf} =~ m{$on}ixms) {
+ $opt{perfdata} = 1;
+ }
+ elsif ($tiny->{$keyword}->{$conf} =~ m{$off}ixms) {
+ $opt{perfdata} = undef;
+ }
+ elsif ($tiny->{$keyword}->{$conf} =~ m{\A minimal|multiline \z}xms) {
+ $opt{perfdata} = $tiny->{$keyword}->{$conf};
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$conf' must be either boolean, 'minimal' or 'multiline'", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set temp unit from config file
+ sub configfile_set_tempunit {
+ my $keyword = shift;
+ my $conf = $opt2config{tempunit};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ if ($tiny->{$keyword}->{$conf} =~ m{\A C|F|K|R \z}ixms) {
+ $opt{tempunit} = $tiny->{$keyword}->{$conf};
+ }
+ else {
+ report('other', "CONFIG ERROR: Rvalue for '$conf' must one of C/F/K/R", $E_UNKNOWN);
+ }
+ }
+ return;
+ }
+
+ # Set postmsg string from config file
+ sub configfile_set_postmsg {
+ my $keyword = shift;
+ my $conf = $opt2config{postmsg};
+ if (defined $tiny->{$keyword}->{$conf} and $tiny->{$keyword}->{$conf} ne q{}) {
+ $opt{postmsg} = $tiny->{$keyword}->{$conf}; # array ref
+ }
+ return;
+ }
+
+ # Sections in the config file to check for statements
+ my @sections = ();
+
+ # First: Populate the sections array with the global section
+ @sections = ('_');
+
+ # Second: Populate the sections array with host glob pattern (but
+ # not exact match)
+ PATTERN:
+ foreach my $glob (sort keys %{ $tiny }) {
+ next PATTERN if $glob eq '_'; # global section
+ next PATTERN if $glob eq $opt{hostname}; # exact match
+ my $regex = glob2regex($glob); # make regexp
+ if ($opt{hostname} =~ m{$regex}) {
+ push @sections, $glob;
+ }
+ }
+
+ # Third: Populate the sections array with exact hostname
+ if (defined $tiny->{$opt{hostname}}) {
+ push @sections, $opt{hostname};
+ }
+
+ # Loop through the sections array and get options
+ foreach my $sect (@sections) {
+ configfile_adjust_checks($sect);
+ configfile_set_blacklist($sect);
+ configfile_set_timeout($sect);
+ configfile_set_htmlinfo($sect);
+ configfile_set_ok_verbosity($sect);
+ configfile_set_boolean($sect, 'all');
+ configfile_set_boolean($sect, 'info');
+ configfile_set_boolean($sect, 'extinfo');
+ configfile_set_boolean($sect, 'state');
+ configfile_set_boolean($sect, 'shortstate');
+ configfile_set_boolean($sect, 'show_blacklist');
+ configfile_set_boolean($sect, 'ipv6');
+ configfile_set_boolean($sect, 'tcp');
+ configfile_set_boolean($sect, 'legacy_perfdata');
+ configfile_set_snmp_version($sect);
+ configfile_set_snmp_community($sect);
+ configfile_set_snmp_port($sect);
+ configfile_set_temp_threshold($sect, 'warning');
+ configfile_set_temp_threshold($sect, 'critical');
+ configfile_set_perfdata($sect);
+ configfile_set_tempunit($sect);
+ configfile_set_postmsg($sect);
+ }
+
+ return;
+}
+
#
# Store a message in one of the message arrays
#
@@ -446,7 +806,6 @@
return push @{ $type2array{$type} }, [ $msg, $exval, $id ];
}
-
#
# Run command, put resulting output lines in an array and return a
# pointer to that array
@@ -700,12 +1059,12 @@
# Read the blacklist option and return a hash containing the
# blacklisted components
#
-sub get_blacklist {
+sub set_blacklist {
+ my $foo = shift;
my @bl = ();
- my %blacklist = ();
- if (scalar @{ $opt{blacklist} } >= 0) {
- foreach my $black (@{ $opt{blacklist} }) {
+ if (scalar @{ $foo } >= 0) {
+ foreach my $black (@{ $foo }) {
my $tmp = q{};
if (-f $black) {
open my $BL, '<', $black
@@ -730,11 +1089,11 @@
next if $c !~ m/=/xms;
my ($key, $val) = split /=/xms, $c;
my @vals = split /,/xms, $val;
- $blacklist{$key} = \@vals;
+ push @{ $blacklist{$key} }, @vals;
}
}
- return \%blacklist;
+ return;
}
#
@@ -881,7 +1240,7 @@
# information that isn't possible to parse consistently. Remove
# everything after and including "Path Health"
if ($command =~ m{\A storage\sconnector}xms) {
- $rawtext =~ s{Path\sHealth.*}{}xms;
+ $rawtext =~ s{Path\sHealth.*}{}xms;
}
# Report if no controllers found
@@ -1138,6 +1497,23 @@
return $alt;
}
+# Converts from Celsius to something else
+sub temp_from_celsius {
+ my $x = shift;
+ my $to = shift;
+
+ if ($to eq 'F') {
+ return sprintf '%.1f', ($x * 9/5 + 32);
+ }
+ elsif ($to eq 'K') {
+ return sprintf '%.1f', ($x + 273.15);
+ }
+ elsif ($to eq 'R') {
+ return sprintf '%.1f', ($x * 9/5 + 32 + 459.67);
+ }
+ return $x;
+}
+
#---------------------------------------------------------------------
# Check functions
@@ -2478,6 +2854,15 @@
$min_warn =~ s{\A \s* (-?\d+) \s* C? \s* \z}{$1}xms or $min_warn = '[N/A]';
$min_crit =~ s{\A \s* (-?\d+) \s* C? \s* \z}{$1}xms or $min_crit = '[N/A]';
+ # Convert temp units
+ if ($opt{tempunit} ne 'C') {
+ $reading = temp_from_celsius($reading, $opt{tempunit});
+ $max_warn = temp_from_celsius($max_warn, $opt{tempunit});
+ $max_crit = temp_from_celsius($max_crit, $opt{tempunit});
+ $min_warn = temp_from_celsius($min_warn, $opt{tempunit});
+ $min_crit = temp_from_celsius($min_crit, $opt{tempunit});
+ }
+
# Inactive temp probes
if ($status eq 'Unknown' and $state eq 'Inactive') {
my $msg = sprintf '%s in enclosure %s [%s] is %s',
@@ -2485,26 +2870,26 @@
report('storage', $msg, $E_OK, $nexus);
}
elsif ($status ne 'Ok' and $max_crit ne '[N/A]' and $reading > $max_crit) {
- my $msg = sprintf '%s in enclosure %s [%s] is critically high at %d C',
- $name, $encl_id, $encl_name, $reading;
+ my $msg = sprintf '%s in enclosure %s [%s] is critically high at %s %s',
+ $name, $encl_id, $encl_name, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $nexus);
}
elsif ($status ne 'Ok' and $max_warn ne '[N/A]' and $reading > $max_warn) {
- my $msg = sprintf '%s in enclosure %s [%s] is too high at %d C',
- $name, $encl_id, $encl_name, $reading;
+ my $msg = sprintf '%s in enclosure %s [%s] is too high at %s %s',
+ $name, $encl_id, $encl_name, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $nexus);
}
elsif ($status ne 'Ok' and $min_crit ne '[N/A]' and $reading < $min_crit) {
- my $msg = sprintf '%s in enclosure %s [%s] is critically low at %d C',
- $name, $encl_id, $encl_name, $reading;
+ my $msg = sprintf '%s in enclosure %s [%s] is critically low at %s %s',
+ $name, $encl_id, $encl_name, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $nexus);
}
elsif ($status ne 'Ok' and $min_warn ne '[N/A]' and $reading < $min_warn) {
- my $msg = sprintf '%s in enclosure %s [%s] is too low at %d C',
- $name, $encl_id, $encl_name, $reading;
+ my $msg = sprintf '%s in enclosure %s [%s] is too low at %s %s',
+ $name, $encl_id, $encl_name, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $nexus);
}
@@ -2515,7 +2900,7 @@
if (defined $reading && $reading =~ m{\A -?\d+ \z}xms) {
# take into account that with certain states the
# reading doesn't exist or is not an integer
- $msg .= sprintf ' at %s C', $reading;
+ $msg .= sprintf ' at %s %s', $reading, $opt{tempunit};
if ($min_warn eq '[N/A]' or $min_crit eq '[N/A]') {
$msg .= sprintf ' (max=%s/%s)', $max_warn, $max_crit;
}
@@ -2534,7 +2919,7 @@
if (defined $reading && $reading ne '[N/A]') {
# take into account that with certain states the
# reading doesn't exist or is not an integer
- $msg .= sprintf ' reads %d C', $reading;
+ $msg .= sprintf ' reads %s %s', $reading, $opt{tempunit};
if ($min_warn eq '[N/A]' or $min_crit eq '[N/A]') {
$msg .= sprintf ' (max=%s/%s)', $max_warn, $max_crit;
}
@@ -2551,16 +2936,23 @@
# Collect performance data
if (defined $opt{perfdata} && $reading ne '[N/A]') {
- $name =~ s{\A Temperature\sProbe\s(\d+) \z}{temp_$1}gxms;
- my $label = "enclosure_${encl_id}_${name}";
- my $mini = $label;
- $mini =~ s{enclosure_(.+?)_temp_(.+?)}{e$1t$2}xms;
+ my $index = $name;
+ $index =~ s{\A Temperature\sProbe\s(\d+) \z}{$1}gxms;
+ my $legacy_name = $name;
+ $legacy_name =~ s{\A Temperature\sProbe\s(\d+) \z}{temp_$1}gxms;
+ my $legacy_label = lc "enclosure_${encl_id}_${legacy_name}";
+ my $legacy_mini = $legacy_label;
+ $legacy_mini =~ s{enclosure_(.+?)_temp_(.+?)}{e$1t$2}xms;
push @perfdata, {
- label => $label,
- mini => $mini,
- value => $reading,
- warn => $max_warn,
- crit => $max_crit,
+ type => 'E',
+ id => $opt{perfdata} eq 'minimal' ? "${encl_id}_t${index}" : "${encl_id}_temp_${index}",
+ unit => $opt{tempunit},
+ label => q{},
+ legacy => $legacy_label,
+ mini => $legacy_mini,
+ value => $reading,
+ warn => $max_warn,
+ crit => $max_crit,
};
}
}
@@ -2887,15 +3279,21 @@
# Collect performance data
if (defined $opt{perfdata}) {
- my $pname = lc $location;
+ my $pname = $location;
$pname =~ s{\s}{_}gxms;
$pname =~ s{proc_}{cpu#}xms;
+ my $legacy_pname = $pname;
+ $pname =~ s{_rpm\z}{}ixms;
push @perfdata, {
- label => "fan_${index}_${pname}",
- mini => "f$index",
- value => $reading,
- warn => $max_warn,
- crit => $max_crit,
+ type => 'F',
+ id => $index,
+ unit => 'rpm',
+ label => $pname,
+ legacy => lc "fan_${index}_${legacy_pname}",
+ mini => "f$index",
+ value => $reading,
+ warn => $max_warn,
+ crit => $max_crit,
};
}
}
@@ -3137,6 +3535,15 @@
$count{temp}++;
next TEMP if blacklisted('temp', $index);
+ # Convert temp units
+ if ($opt{tempunit} ne 'C') {
+ $reading = temp_from_celsius($reading, $opt{tempunit});
+ $max_warn = temp_from_celsius($max_warn, $opt{tempunit});
+ $max_crit = temp_from_celsius($max_crit, $opt{tempunit});
+ $min_warn = temp_from_celsius($min_warn, $opt{tempunit});
+ $min_crit = temp_from_celsius($min_crit, $opt{tempunit});
+ }
+
if ($type eq 'Discrete') {
my $msg = sprintf 'Temperature probe %d [%s] is %s',
$index, $location, $discrete;
@@ -3147,56 +3554,56 @@
# First check according to custom thresholds
if (exists $crit_threshold{$index}{max} and $reading > $crit_threshold{$index}{max}) {
# Custom critical MAX
- my $msg = sprintf 'Temperature Probe %d [%s] reads %d C (custom max=%d)',
- $index, $location, $reading, $crit_threshold{$index}{max};
+ my $msg = sprintf 'Temperature Probe %d [%s] reads %s %s (custom max=%s)',
+ $index, $location, $reading, $opt{tempunit}, $crit_threshold{$index}{max};
report('chassis', $msg, $E_CRITICAL, $index);
}
elsif (exists $warn_threshold{$index}{max} and $reading > $warn_threshold{$index}{max}) {
# Custom warning MAX
- my $msg = sprintf 'Temperature Probe %d [%s] reads %d C (custom max=%d)',
- $index, $location, $reading, $warn_threshold{$index}{max};
+ my $msg = sprintf 'Temperature Probe %d [%s] reads %s %s (custom max=%s)',
+ $index, $location, $reading, $opt{tempunit}, $warn_threshold{$index}{max};
report('chassis', $msg, $E_WARNING, $index);
}
elsif (exists $crit_threshold{$index}{min} and $reading < $crit_threshold{$index}{min}) {
# Custom critical MIN
- my $msg = sprintf 'Temperature Probe %d [%s] reads %d C (custom min=%d)',
- $index, $location, $reading, $crit_threshold{$index}{min};
+ my $msg = sprintf 'Temperature Probe %d [%s] reads %s %s (custom min=%s)',
+ $index, $location, $reading, $opt{tempunit}, $crit_threshold{$index}{min};
report('chassis', $msg, $E_CRITICAL, $index);
}
elsif (exists $warn_threshold{$index}{min} and $reading < $warn_threshold{$index}{min}) {
# Custom warning MIN
- my $msg = sprintf 'Temperature Probe %d [%s] reads %d C (custom min=%d)',
- $index, $location, $reading, $warn_threshold{$index}{min};
+ my $msg = sprintf 'Temperature Probe %d [%s] reads %s %s (custom min=%s)',
+ $index, $location, $reading, $opt{tempunit}, $warn_threshold{$index}{min};
report('chassis', $msg, $E_WARNING, $index);
}
elsif ($status ne 'Ok' and $max_crit ne '[N/A]' and $reading > $max_crit) {
- my $msg = sprintf 'Temperature Probe %d [%s] is critically high at %d C',
- $index, $location, $reading;
+ my $msg = sprintf 'Temperature Probe %d [%s] is critically high at %s %s',
+ $index, $location, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $index);
}
elsif ($status ne 'Ok' and $max_warn ne '[N/A]' and $reading > $max_warn) {
- my $msg = sprintf 'Temperature Probe %d [%s] is too high at %d C',
- $index, $location, $reading;
+ my $msg = sprintf 'Temperature Probe %d [%s] is too high at %s %s',
+ $index, $location, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $index);
}
elsif ($status ne 'Ok' and $min_crit ne '[N/A]' and $reading < $min_crit) {
- my $msg = sprintf 'Temperature Probe %d [%s] is critically low at %d C',
- $index, $location, $reading;
+ my $msg = sprintf 'Temperature Probe %d [%s] is critically low at %s %s',
+ $index, $location, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $index);
}
elsif ($status ne 'Ok' and $min_warn ne '[N/A]' and $reading < $min_warn) {
- my $msg = sprintf 'Temperature Probe %d [%s] is too low at %d C',
- $index, $location, $reading;
+ my $msg = sprintf 'Temperature Probe %d [%s] is too low at %s %s',
+ $index, $location, $reading, $opt{tempunit};
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $index);
}
# Ok
else {
- my $msg = sprintf 'Temperature Probe %d [%s] reads %d C',
- $index, $location, $reading;
+ my $msg = sprintf 'Temperature Probe %d [%s] reads %s %s',
+ $index, $location, $reading, $opt{tempunit};
if ($min_warn eq '[N/A]' and $min_crit eq '[N/A]') {
$msg .= sprintf ' (max=%s/%s)', $max_warn, $max_crit;
}
@@ -3210,16 +3617,20 @@
# Collect performance data
if (defined $opt{perfdata}) {
- my $pname = lc $location;
+ my $pname = $location;
$pname =~ s{\s}{_}gxms;
- $pname =~ s{_temp\z}{}xms;
+ $pname =~ s{_temp\z}{}ixms;
$pname =~ s{proc_}{cpu#}xms;
push @perfdata, {
- label => "temp_${index}_${pname}",
- mini => "t$index",
- value => $reading,
- warn => $max_warn,
- crit => $max_crit,
+ type => 'T',
+ id => $index,
+ unit => $opt{tempunit},
+ label => $pname,
+ legacy => lc "temp_${index}_${pname}",
+ mini => "t$index",
+ value => $reading,
+ warn => $max_warn,
+ crit => $max_crit,
};
}
}
@@ -3533,6 +3944,8 @@
my $status = undef;
my $reading = undef;
my $location = undef;
+ my $max_crit = undef;
+ my $max_warn = undef;
my @output = ();
if ($snmp) {
@@ -3575,12 +3988,19 @@
? sprintf('%.3f V', $out->{voltageProbeReading}/1000)
: (get_hashval($out->{voltageProbeDiscreteReading}, \%volt_discrete_reading) || 'Unknown reading');
$location = $out->{voltageProbeLocationName} || 'Unknown location';
+ $max_crit = $out->{voltageProbeUpperCriticalThreshold} || 0;
+ $max_warn = $out->{voltageProbeUpperNonCriticalThreshold} || 0;
}
else {
$index = get_nonempty_string('Index', $out, 9999);
$status = get_nonempty_string('Status', $out, 'Unknown');
$reading = get_nonempty_string('Reading', $out, 'Unknown reading');
$location = get_nonempty_string('Probe Name', $out, 'Unknown location');
+ $max_crit = get_nonempty_string('Maximum Failure Threshold', $out, 0);
+ $max_warn = get_nonempty_string('Maximum Warning Threshold', $out, 0);
+
+ $max_crit = 0 if $max_crit eq '[N/A]';
+ $max_warn = 0 if $max_warn eq '[N/A]';
}
$count{volt}++;
@@ -3590,6 +4010,24 @@
$index, $location, $reading;
my $err = $snmp ? $probestatus2nagios{$status} : $status2nagios{$status};
report('chassis', $msg, $err, $index);
+
+ # Collect performance data
+ if (defined $opt{perfdata} and !$opt{legacy_perfdata}) {
+ $reading =~ s{\s+V\z}{}xms; # remove unit
+ $reading =~ s{\.000\z}{}xms; # if integer
+ next VOLT if $reading !~ m{\A \d+(\.\d+)? \z}xms; # discrete reading (not number)
+ my $label = join q{_}, $location;
+ $label =~ s{\s}{_}gxms;
+ push @perfdata, {
+ type => 'V',
+ id => $index,
+ unit => 'V',
+ label => $label,
+ value => $reading,
+ warn => 0,
+ crit => 0,
+ };
+ }
}
return;
}
@@ -3819,14 +4257,18 @@
# Collect performance data
if (defined $opt{perfdata}) {
next AMP if $reading !~ m{\A \d+(\.\d+)? \z}xms; # discrete reading (not number)
- my $label = join q{_}, 'pwr_mon', $index, lc $location;
+ my $label = join q{_}, $location;
$label =~ s{\s}{_}gxms;
push @perfdata, {
- label => $label,
- mini => "p${index}" . lc $unit,
- value => $reading,
- warn => $max_warn,
- crit => $max_crit,
+ type => $unit,
+ id => $index,
+ unit => $unit,
+ label => $label,
+ legacy => (join q{_}, 'pwr_mon', $index, lc $label),
+ mini => "p${index}" . lc $unit,
+ value => $reading,
+ warn => $max_warn,
+ crit => $max_crit,
};
}
}
@@ -3840,7 +4282,7 @@
# find used indexes
foreach (@perfdata) {
- if ($_->{label} =~ m/\A pwr_mon_(\d+)/xms) {
+ if ($_->{label} =~ m/\A [WA](\d+)/xms) {
$used{$1} = 1;
}
}
@@ -3848,7 +4290,7 @@
AMP2:
foreach my $line (@{ run_command("$omreport $omopt_chassis pwrmonitoring -fmt ssv") }) {
chop $line;
- if ($line eq 'Location;Reading') {
+ if ($line eq 'Location;Reading' or $line eq 'Amperage') {
$found = 1;
next AMP2;
}
@@ -3856,20 +4298,25 @@
$found = 0;
next AMP2;
}
- if ($found and $line =~ m/\A ([^;]+?) ; (\d*\.\d+) \s [AW] \z/xms) {
- my $aname = lc $1;
- my $aval = $2;
+ if ($found and $line =~ m/\A ([^;]+?) ; (\d*\.\d+) \s ([AW]) \z/xms) {
+ my $aname = $1;
+ my $aval = $2;
+ my $aunit = $3;
$aname =~ s{\s}{_}gxms;
# don't use an existing index
while (exists $used{$index}) { ++$index; }
push @perfdata, {
- label => "pwr_mon_${index}_${aname}",
- mini => "p${index}a",
- value => $aval,
- warn => 0,
- crit => 0,
+ type => $aunit,
+ id => $index,
+ unit => $aunit,
+ label => $aname,
+ legacy => "pwr_mon_${index}_${aname}",
+ mini => "p${index}a",
+ value => $aval,
+ warn => 0,
+ crit => 0,
};
++$index;
}
@@ -4680,7 +5127,7 @@
# Prefix with service tag if specified with option '-i|--info'
if ($opt{info}) {
if (defined $opt{htmlinfo}) {
- $msg = '[<a href="' . warranty_url($sysinfo{serial})
+ $msg = '[<a target="_blank" href="' . warranty_url($sysinfo{serial})
. "\">$sysinfo{serial}</a>] " . $msg;
}
else {
@@ -4748,7 +5195,7 @@
}
elsif ($exit_code == $E_OK && !$opt{debug}) {
if (defined $opt{htmlinfo}) {
- printf q{OK - System: '<a href="%s">%s%s</a>', SN: '<a href="%s">%s</a>'},
+ printf q{OK - System: '<a target="_blank" href="%s">%s%s</a>', SN: '<a target="_blank" href="%s">%s</a>'},
documentation_url($sysinfo{model}), $sysinfo{model}, $sysinfo{rev},
warranty_url($sysinfo{serial}), $sysinfo{serial};
}
@@ -4834,7 +5281,7 @@
if ($opt{extinfo}) {
print $linebreak;
if (defined $opt{htmlinfo}) {
- printf '------ SYSTEM: <a href="%s">%s%s</a>, SN: <a href="%s">%s</a>',
+ printf '------ SYSTEM: <a target="_blank" href="%s">%s%s</a>, SN: <a target="_blank" href="%s">%s</a>',
documentation_url($sysinfo{model}), $sysinfo{model}, $sysinfo{rev},
warranty_url($sysinfo{serial}), $sysinfo{serial};
}
@@ -4893,14 +5340,39 @@
# Sort routine for performance data
sub perfsort {
+ my %order = ( 'T' => 0, 'W' => 1, 'A' => 2, 'V' => 3, 'F' => 4, 'E' => 5, );
+
+ # sort in this order:
+ # 1. the type according to the hash "order" above
+ # 2. the id (index) numerically
+ # 3. the id (index) alphabetically
+ # 4. the label
+ return $order{$a->{type}} cmp $order{$b->{type}} ||
+ ($a->{id} =~ m{\A\d+\z}xms and $a->{id} <=> $b->{id}) ||
+ ($a->{id} !~ m{\A\d+\z}xms and $a->{id} cmp $b->{id}) ||
+ $a->{label} cmp $b->{label};
+ }
+
+ # LEGACY sort routine for performance data
+ sub perfsort_legacy {
my %order = ( fan => 0, pwr => 1, tem => 2, enc => 3, );
- return ($order{(substr $a->{label}, 0, 3)} cmp $order{(substr $b->{label}, 0, 3)}) ||
- $a->{label} cmp $b->{label};
+ return ($order{(substr $a->{legacy}, 0, 3)} cmp $order{(substr $b->{legacy}, 0, 3)}) ||
+ $a->{legacy} cmp $b->{legacy};
}
# Print performance data sorted
- my $type = $opt{perfdata} eq 'minimal' ? 'mini' : 'label';
- print join $lb, map { "$_->{$type}=$_->{value};$_->{warn};$_->{crit}" } sort perfsort @perfdata;
+ if ($opt{legacy_perfdata}) {
+ my $type = $opt{perfdata} eq 'minimal' ? 'mini' : 'legacy';
+ print join $lb, map { "$_->{$type}=$_->{value};$_->{warn};$_->{crit}" } sort perfsort_legacy @perfdata;
+ }
+ else {
+ if ($opt{perfdata} eq 'minimal') {
+ print join $lb, map { "$_->{type}$_->{id}=$_->{value}$_->{unit};$_->{warn};$_->{crit}" } sort perfsort @perfdata;
+ }
+ else {
+ print join $lb, map { "$_->{type}$_->{id}_$_->{label}=$_->{value}$_->{unit};$_->{warn};$_->{crit}" } sort perfsort @perfdata;
+ }
+ }
}
# Wrapping up and finishing
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/check_openmanage.8
^
|
| @@ -124,7 +124,7 @@
.\" ========================================================================
.\"
.IX Title "CHECK_OPENMANAGE 8"
-.TH CHECK_OPENMANAGE 8 "2011-04-28" "check_openmanage 3.6.6" "Nagios plugin"
+.TH CHECK_OPENMANAGE 8 "2011-06-27" "check_openmanage 3.7.0" "Nagios plugin"
.\" For nroff, turn off justification. Always turn off hyphenation; it makes
.\" way too many mistakes in technical documents.
.if n .ad l
@@ -152,6 +152,10 @@
in \s-1SNMP\s0 mode.
.SH "GENERAL OPTIONS"
.IX Header "GENERAL OPTIONS"
+.IP "\-f, \-\-config \fI\s-1FILE\s0\fR" 4
+.IX Item "-f, --config FILE"
+Specify a configuration file. For reference on the config file syntax
+and options, consult the \fIcheck_openmanage.conf\fR\|(5) manual page.
.IP "\-t, \-\-timeout \fI\s-1SECONDS\s0\fR" 4
.IX Item "-t, --timeout SECONDS"
The number of seconds after which the plugin will abort. Default
@@ -171,6 +175,11 @@
.Sp
If given the argument \f(CW\*(C`multiline\*(C'\fR, the plugin will output the
performance data on multiple lines, for Nagios 3.x and above.
+.IP "\-\-legacy\-perfdata" 4
+.IX Item "--legacy-perfdata"
+With version 3.7.0, performance data output changed. The new format is
+not compatible with the old format. Users who wish to postpone
+switching to the new performance data \s-1API\s0 may set this option.
.IP "\-w, \-\-warning \fI\s-1STRING\s0\fR or \fI\s-1FILE\s0\fR" 4
.IX Item "-w, --warning STRING or FILE"
Override the machine-default temperature warning thresholds. Syntax is
@@ -194,6 +203,14 @@
.IX Item "-c, --critical STRING or FILE"
Override the machine-default temperature critical thresholds. Syntax
and behaviour is the same as for warning thresholds described above.
+.IP "\-F, \-\-fahrenheit" 4
+.IX Item "-F, --fahrenheit"
+Set Fahrenheit as unit for all temperatures. This option will override
+the \f(CW\*(C`\-\-tempunit\*(C'\fR option, if used simultaneously.
+.IP "\-\-tempunit \fI\s-1CHAR\s0\fR" 4
+.IX Item "--tempunit CHAR"
+Set temperature unit. Legal values are \f(CW\*(C`F\*(C'\fR for Fahrenheit, \f(CW\*(C`C\*(C'\fR for
+Celsius, \f(CW\*(C`K\*(C'\fR for Kelvin and \f(CW\*(C`R\*(C'\fR for Rankine.
.IP "\-o, \-\-ok\-info \fI\s-1NUMBER\s0\fR" 4
.IX Item "-o, --ok-info NUMBER"
This option lets you define how much output you want the plugin to
@@ -502,6 +519,9 @@
.IP "\fBpdisk\fR" 8
.IX Item "pdisk"
Physical disk.
+.IP "\fBpdisk_cert\fR" 8
+.IX Item "pdisk_cert"
+Suppress warning message about non-certified physical disk.
.IP "\fBvdisk\fR" 8
.IX Item "vdisk"
Logical drive (virtual disk)
@@ -742,4 +762,5 @@
along with this program. If not, see <http://www.gnu.org/licenses/>.
.SH "SEE ALSO"
.IX Header "SEE ALSO"
+\&\fIcheck_openmanage.conf\fR\|(5)
<http://folk.uio.no/trondham/software/check_openmanage.html>
|
|
[-]
[+]
|
Added |
check_openmanage-3.7.0.tar.bz2/check_openmanage.conf.5
^
|
| @@ -0,0 +1,492 @@
+.\" Automatically generated by Pod::Man 2.22 (Pod::Simple 3.13)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings. \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote. \*(C+ will
+.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+. ds -- \(*W-
+. ds PI pi
+. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
+. ds L" ""
+. ds R" ""
+. ds C` ""
+. ds C' ""
+'br\}
+.el\{\
+. ds -- \|\(em\|
+. ds PI \(*p
+. ds L" ``
+. ds R" ''
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el .ds Aq '
+.\"
+.\" If the F register is turned on, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD. Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.ie \nF \{\
+. de IX
+. tm Index:\\$1\t\\n%\t"\\$2"
+..
+. nr % 0
+. rr F
+.\}
+.el \{\
+. de IX
+..
+.\}
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear. Run. Save yourself. No user-serviceable parts.
+. \" fudge factors for nroff and troff
+.if n \{\
+. ds #H 0
+. ds #V .8m
+. ds #F .3m
+. ds #[ \f1
+. ds #] \fP
+.\}
+.if t \{\
+. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+. ds #V .6m
+. ds #F 0
+. ds #[ \&
+. ds #] \&
+.\}
+. \" simple accents for nroff and troff
+.if n \{\
+. ds ' \&
+. ds ` \&
+. ds ^ \&
+. ds , \&
+. ds ~ ~
+. ds /
+.\}
+.if t \{\
+. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+. \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+. \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+. \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+. ds : e
+. ds 8 ss
+. ds o a
+. ds d- d\h'-1'\(ga
+. ds D- D\h'-1'\(hy
+. ds th \o'bp'
+. ds Th \o'LP'
+. ds ae ae
+. ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "CHECK_OPENMANAGE.CONF 5"
+.TH CHECK_OPENMANAGE.CONF 5 "2011-07-04" "check_openmanage 3.7.0" "Nagios plugin"
+.\" For nroff, turn off justification. Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+\&\fIcheck_openmanage.conf\fR \- Configuration file for check_openmanage
+.SH "FILE FORMAT"
+.IX Header "FILE FORMAT"
+The file has an ini-style syntax and consists of sections and
+parameters. A section begins with the name of the section in square
+brackets and continues until the next section begins. An example of
+section with two keywords and parameters:
+.Sp
+.RS 8
+\&\fI[section]\fR
+ \fIkey1\fR = \fIboolean\fR
+ \fIkey2\fR = \fIstring\fR
+.RE
+.PP
+The data types used are string (no quotes needed) and bool (with
+values of \f(CW\*(C`TRUE/FALSE\*(C'\fR). For boolean values, \f(CW1\fR, \f(CW\*(C`on\*(C'\fR and \f(CW\*(C`true\*(C'\fR
+are equivalent, likewise for \f(CW0\fR, \f(CW\*(C`off\*(C'\fR and \f(CW\*(C`false\*(C'\fR. They are also
+case insensitive.
+.PP
+The root section or global section has no section name in brackets,
+example:
+.PP
+.Vb 2
+\& key1 = false
+\& key2 = foo
+\&
+\& [section]
+\& key1 = true
+\& key2 = bar
+.Ve
+.PP
+The values set in a bracket section will override those set in the
+root section, in case of conflicts.
+.PP
+Lines starting with \f(CW\*(C`#\*(C'\fR or \f(CW\*(C`;\*(C'\fR are considered comments and ignored, as
+are blank lines.
+.PP
+The configuration file must be a regular file. Owner and group does
+not matter, but the Nagios user must have read access.
+.SH "SECTIONS AND ORDERING"
+.IX Header "SECTIONS AND ORDERING"
+The section name should correspond to the hostname, i.e. the value
+passed to the \f(CW\*(C`\-H\*(C'\fR or \f(CW\*(C`\-\-hostname\*(C'\fR parameter. The section name
+itself can be either an exact match to the hostname, or a glob
+pattern, as this example shows:
+.PP
+.Vb 2
+\& key1 = true
+\& key2 = foo
+\&
+\& [192.168.1.2]
+\& key1 = true
+\&
+\& [192.168.*]
+\& key1 = false
+\& key2 = bar
+.Ve
+.PP
+The sections are read in order of significance. The root section is
+read first. Then any sections with glob patterns that match the
+hostname are read (alphabetically). Any section whose name is an exact
+match to the hostname is read last.
+.PP
+For boolean values, any conflicts are resolved by letting the section
+with the most significance (closest match to the hostname) override
+any previous definitions. For string values, they are simply added
+together.
+.PP
+In the example above, for the host \f(CW192.168.1.2\fR the value of \fIkey1\fR
+will be \fItrue\fR and \fIkey2\fR will be \fIbar\fR. Any other host that
+matches \f(CW\*(C`192.168.*\*(C'\fR will have \fIkey1 = false\fR and \fIkey2 = bar\fR. All
+other hosts will have \fIkey1 = true\fR and \fIkey2 = foo\fR.
+.PP
+Normal shell globbing may be used for the section names. This is
+limited to \f(CW\*(C`*\*(C'\fR, \f(CW\*(C`?\*(C'\fR and \f(CW\*(C`[]\*(C'\fR. Some examples:
+.PP
+.Vb 2
+\& [192.168.*]
+\& # matches e.g. 192.168.10.20
+\&
+\& [192.168.10[34].1]
+\& # matches 192.168.103.1 and 192.168.104.1
+\&
+\& [login?.example.com]
+\& # mathces e.g. login1.example.com
+.Ve
+.PP
+\&\s-1CAUTION\s0! Be careful not to have more than one glob pattern section
+match any single host. This may lead to unpredictable results.
+.SH "COMMAND LINE OPTIONS"
+.IX Header "COMMAND LINE OPTIONS"
+Unless otherwise noted, options given in the configuration file will
+override any corresponding command line options.
+.PP
+In general, avoid using the same options on command line and in the
+configuration file.
+.SH "CONFIGURATION"
+.IX Header "CONFIGURATION"
+.SS "\s-1GENERAL\s0"
+.IX Subsection "GENERAL"
+.IP "Check control" 4
+.IX Item "Check control"
+Any keyword to the \f(CW\*(C`\-\-check\*(C'\fR parameter are accepted in the
+configuration file, as \f(CW\*(C`check_\f(CIKEYWORD\f(CW\*(C'\fR. These options take boolean
+values (\f(CW\*(C`true\*(C'\fR or \f(CW\*(C`false\*(C'\fR). The following keywords are accepted for
+check control, listed here with their default values:
+.Sp
+.Vb 10
+\& check_storage = true
+\& check_memory = true
+\& check_fans = true
+\& check_power = true
+\& check_temp = true
+\& check_cpu = true
+\& check_voltage = true
+\& check_batteries = true
+\& check_amperage = true
+\& check_intrusion = true
+\& check_sdcard = true
+\& check_esmhealth = true
+\& check_esmlog = false
+\& check_alertlog = false
+\& check_everything = false
+.Ve
+.Sp
+If used together with the \f(CW\*(C`\-\-check\*(C'\fR command line option, the command
+line option will override the configuration file, if there is a
+conflict.
+.Sp
+The option \f(CW\*(C`check_everything\*(C'\fR is special and turns on all
+checks. Setting this option to \*(L"true\*(R" will effectively negate any
+other check options. This option corresponds to the \f(CW\*(C`\-a\*(C'\fR or \f(CW\*(C`\-\-all\*(C'\fR
+command line option.
+.Sp
+For more information about check control, see
+\&\*(L"\s-1CHECK\s0 \s-1CONTROL\s0\*(R" in \fIcheck_openmanage\fR\|(8).
+.IP "Blacklisting" 4
+.IX Item "Blacklisting"
+For blacklisting the keyword \f(CW\*(C`blacklist\*(C'\fR is used, and the value is a
+string that uses the same syntax as the \f(CW\*(C`\-b\*(C'\fR or \f(CW\*(C`\-\-blacklist\*(C'\fR
+parameter. Example:
+.Sp
+.Vb 1
+\& blacklist = ctrl_fw=all/pdisk=0:0:1
+.Ve
+.Sp
+If used together with the \f(CW\*(C`\-b\*(C'\fR or \f(CW\*(C`\-\-blacklist\*(C'\fR command line option,
+the two blacklists from the config file and command line are merged
+together.
+.Sp
+For more information about blacklisting, including syntax, see
+\&\*(L"\s-1BLACKLISTING\s0\*(R" in \fIcheck_openmanage\fR\|(8).
+.IP "Timeout" 4
+.IX Item "Timeout"
+The plugin timeout can be configured with the \f(CW\*(C`timeout\*(C'\fR keyword. The
+argument is number of seconds and should be a positive
+integer. Example:
+.Sp
+.Vb 1
+\& timeout = 60
+.Ve
+.Sp
+The corresponding command line option is \f(CW\*(C`\-t\*(C'\fR or \f(CW\*(C`\-\-timeout\*(C'\fR.
+.IP "Performance data" 4
+.IX Item "Performance data"
+Performance data can be turned on in the configuration file with
+\&\f(CW\*(C`performance_data\*(C'\fR. Accepted values are boolean (\s-1TRUE/FALSE\s0) or
+either of the keywords \*(L"minimal\*(R" and \*(L"multiline\*(R". Example:
+.Sp
+.Vb 1
+\& performance_data = true
+.Ve
+.Sp
+The corresponding command line option is \f(CW\*(C`\-p\*(C'\fR or \f(CW\*(C`\-\-perfdata\*(C'\fR.
+.IP "Legacy Performance data" 4
+.IX Item "Legacy Performance data"
+With version 3.7.0, performance data output changed. The new format is
+not compatible with the old format. Users who wish to postpone
+switching to the new performance data \s-1API\s0 may use this option. This
+option takes a boolean value. Example:
+.Sp
+.Vb 1
+\& legacy_performance_data = true
+.Ve
+.Sp
+The corresponding command line option is \f(CW\*(C`\-\-legacy\-perfdata\*(C'\fR.
+.IP "Temperature unit" 4
+.IX Item "Temperature unit"
+The temperature unit used for reporting, performance data etc. can be
+set with the \f(CW\*(C`temperature_unit\*(C'\fR option. Allowed values are \f(CW\*(C`F\*(C'\fR for
+Fahrenheit, \f(CW\*(C`C\*(C'\fR for Celsius, \f(CW\*(C`K\*(C'\fR for Kelvin and \f(CW\*(C`R\*(C'\fR for
+Rankine. Example:
+.Sp
+.Vb 1
+\& temperature_unit = F
+.Ve
+.Sp
+The corresponding command line option is \f(CW\*(C`\-\-tempunit\*(C'\fR. Note that the
+command line option \f(CW\*(C`\-F\*(C'\fR or \f(CW\*(C`\-\-fahrenheit\*(C'\fR will override both the
+command line option and the configuration file option.
+.IP "Temperature limits" 4
+.IX Item "Temperature limits"
+Custom temperature limits may be configured with the options
+\&\f(CW\*(C`temp_threshold_warning\*(C'\fR and \f(CW\*(C`temp_threshold_critical\*(C'\fR. These
+options corresponds to the command line options \f(CW\*(C`\-w\*(C'\fR or \f(CW\*(C`\-\-warning\*(C'\fR
+and \f(CW\*(C`\-c\*(C'\fR or \f(CW\*(C`\-\-critical\*(C'\fR, respectively. They take the same arguments
+as the command line options. Examples:
+.Sp
+.Vb 2
+\& temp_threshold_warning = 0=30/10
+\& temp_threshold_critical = 0=35/8
+.Ve
+.SS "\s-1SNMP\s0 \s-1OPTIONS\s0"
+.IX Subsection "SNMP OPTIONS"
+Several \s-1SNMP\s0 related options may be set in the configuration file. The
+configuration file may contain the following \s-1SNMP\s0 options:
+.IP "\s-1SNMP\s0 community string" 4
+.IX Item "SNMP community string"
+The \s-1SNMP\s0 community string can be set with \f(CW\*(C`snmp_community\*(C'\fR. Example:
+.Sp
+.Vb 1
+\& snmp_community = mycommunity
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-C\*(C'\fR or \f(CW\*(C`\-\-community\*(C'\fR
+.IP "\s-1SNMP\s0 protocol version" 4
+.IX Item "SNMP protocol version"
+The \s-1SNMP\s0 protocol version can be set with \f(CW\*(C`snmp_version\*(C'\fR. Example:
+.Sp
+.Vb 1
+\& snmp_version = 2
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-P\*(C'\fR or \f(CW\*(C`\-\-protocol\*(C'\fR
+.IP "\s-1SNMP\s0 port number" 4
+.IX Item "SNMP port number"
+The remote port number used with \s-1SNMP\s0 can be set with
+\&\f(CW\*(C`snmp_port\*(C'\fR. Example:
+.Sp
+.Vb 1
+\& snmp_port = 161
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-\-port\*(C'\fR
+.IP "Use IPv6 instead of IPv4" 4
+.IX Item "Use IPv6 instead of IPv4"
+The option \f(CW\*(C`snmp_use_ipv6\*(C'\fR instructs the plugin to use IPv6 instead
+of IPv4. This option takes a boolean value. Example:
+.Sp
+.Vb 1
+\& snmp_use_ipv6 = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-6\*(C'\fR or \f(CW\*(C`\-\-ipv6\*(C'\fR
+.IP "Use \s-1TCP\s0 instead of \s-1UDP\s0" 4
+.IX Item "Use TCP instead of UDP"
+The option \f(CW\*(C`snmp_use_ipv6\*(C'\fR instructs the plugin to use IPv6 instead
+of IPv4. This option takes a boolean value. Example:
+.Sp
+.Vb 1
+\& snmp_use_tcp = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-\-tcp\*(C'\fR
+.SS "\s-1OUTPUT\s0 \s-1CONTROL\s0"
+.IX Subsection "OUTPUT CONTROL"
+These options gives some control over the output given by the plugin.
+.IP "Include servicetag in alerts" 4
+.IX Item "Include servicetag in alerts"
+The option \f(CW\*(C`output_servicetag\*(C'\fR will make the plugin include the
+servers servicetag (serial number) in every alert. This option takes a
+boolean value. Example:
+.Sp
+.Vb 1
+\& output_servicetag = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-i\*(C'\fR or \f(CW\*(C`\-\-info\*(C'\fR
+.IP "Include service state in alerts" 4
+.IX Item "Include service state in alerts"
+The option \f(CW\*(C`output_servicestate\*(C'\fR will make the plugin include the
+service state in any alerts. This option takes a boolean
+value. Example:
+.Sp
+.Vb 1
+\& output_servicestate = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-s\*(C'\fR or \f(CW\*(C`\-\-state\*(C'\fR
+.IP "Include abbreviated service state in alerts" 4
+.IX Item "Include abbreviated service state in alerts"
+The option \f(CW\*(C`output_servicestate_abbr\*(C'\fR will make the plugin include
+the abbreviated service state in any alerts. This option takes a
+boolean value. Example:
+.Sp
+.Vb 1
+\& output_servicestate_abbr = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-S\*(C'\fR or \f(CW\*(C`\-\-short\-state\*(C'\fR
+.IP "Show system info with alerts" 4
+.IX Item "Show system info with alerts"
+The option \f(CW\*(C`output_sysinfo\*(C'\fR will make the plugin output some system
+information with alerts. This option takes a boolean value. Example:
+.Sp
+.Vb 1
+\& output_sysinfo = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-e\*(C'\fR or \f(CW\*(C`\-\-extinfo\*(C'\fR
+.IP "Show blacklistings in \s-1OK\s0 output" 4
+.IX Item "Show blacklistings in OK output"
+The option \f(CW\*(C`output_blacklist\*(C'\fR will make the plugin show any
+blacklistings in the \s-1OK\s0 output. This option takes a boolean
+value. Example:
+.Sp
+.Vb 1
+\& output_blacklist = true
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-B\*(C'\fR or \f(CW\*(C`\-\-show\-blacklist\*(C'\fR
+.IP "Verbosity of \s-1OK\s0 output" 4
+.IX Item "Verbosity of OK output"
+The option \f(CW\*(C`output_ok_verbosity\*(C'\fR lets you adjust how much information
+is shown in the \s-1OK\s0 output. This option takes a positive integer as
+parameter. Example:
+.Sp
+.Vb 1
+\& output_ok_verbosity = 3
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-o\*(C'\fR or \f(CW\*(C`\-\-ok\-info\*(C'\fR
+.IP "\s-1HTML\s0 output" 4
+.IX Item "HTML output"
+The output \f(CW\*(C`output_html\*(C'\fR makes the plugin produce \s-1HTML\s0 output. This
+option takes either a boolean value, or a country or area
+code. Example:
+.Sp
+.Vb 1
+\& output_html = de
+.Ve
+.Sp
+Corresponding command line option: \f(CW\*(C`\-I\*(C'\fR or \f(CW\*(C`\-\-htmlinfo\*(C'\fR
+.IP "Custom line after alerts" 4
+.IX Item "Custom line after alerts"
+The option \f(CW\*(C`output_post_message\*(C'\fR lets you specify one line of
+information to be shown after any alerts. This option takes a string
+as parameter. Examples:
+.Sp
+.Vb 2
+\& output_post_message = OS: %o %r
+\& output_post_message = NOTE: Handled in ticket 123456
+.Ve
+.Sp
+For more information about codes and formatting, see the corresponding
+command line option \f(CW\*(C`\-\-postmsg\*(C'\fR in \fIcheck_openmanage\fR\|(8).
+.SH "SEE ALSO"
+.IX Header "SEE ALSO"
+\&\fIcheck_openmanage\fR\|(8)
+<http://folk.uio.no/trondham/software/check_openmanage.html>
|
|
[-]
[+]
|
Added |
check_openmanage-3.7.0.tar.bz2/check_openmanage.conf.pod
^
|
| @@ -0,0 +1,364 @@
+# Man page created with:
+#
+# pod2man -s 5 -r "`./check_openmanage -V | head -n 1`" -c 'Nagios plugin' check_openmanage.conf.pod check_openmanage.conf.5
+#
+# $Id: check_openmanage.pod 20039 2011-04-26 09:56:56Z trondham $
+
+=head1 NAME
+
+F<check_openmanage.conf> - Configuration file for check_openmanage
+
+=head1 FILE FORMAT
+
+The file has an ini-style syntax and consists of sections and
+parameters. A section begins with the name of the section in square
+brackets and continues until the next section begins. An example of
+section with two keywords and parameters:
+
+=over 8
+
+I<[section]>
+ I<key1> = I<boolean>
+ I<key2> = I<string>
+
+=back
+
+The data types used are string (no quotes needed) and bool (with
+values of C<TRUE/FALSE>). For boolean values, C<1>, C<on> and C<true>
+are equivalent, likewise for C<0>, C<off> and C<false>. They are also
+case insensitive.
+
+The root section or global section has no section name in brackets,
+example:
+
+ key1 = false
+ key2 = foo
+
+ [section]
+ key1 = true
+ key2 = bar
+
+The values set in a bracket section will override those set in the
+root section, in case of conflicts.
+
+Lines starting with C<#> or C<;> are considered comments and ignored, as
+are blank lines.
+
+The configuration file must be a regular file. Owner and group does
+not matter, but the Nagios user must have read access.
+
+=head1 SECTIONS AND ORDERING
+
+The section name should correspond to the hostname, i.e. the value
+passed to the C<-H> or C<--hostname> parameter. The section name
+itself can be either an exact match to the hostname, or a glob
+pattern, as this example shows:
+
+ key1 = true
+ key2 = foo
+
+ [192.168.1.2]
+ key1 = true
+
+ [192.168.*]
+ key1 = false
+ key2 = bar
+
+The sections are read in order of significance. The root section is
+read first. Then any sections with glob patterns that match the
+hostname are read (alphabetically). Any section whose name is an exact
+match to the hostname is read last.
+
+For boolean values, any conflicts are resolved by letting the section
+with the most significance (closest match to the hostname) override
+any previous definitions. For string values, they are simply added
+together.
+
+In the example above, for the host C<192.168.1.2> the value of I<key1>
+will be I<true> and I<key2> will be I<bar>. Any other host that
+matches C<192.168.*> will have I<key1 = false> and I<key2 = bar>. All
+other hosts will have I<key1 = true> and I<key2 = foo>.
+
+Normal shell globbing may be used for the section names. This is
+limited to C<*>, C<?> and C<[]>. Some examples:
+
+ [192.168.*]
+ # matches e.g. 192.168.10.20
+
+ [192.168.10[34].1]
+ # matches 192.168.103.1 and 192.168.104.1
+
+ [login?.example.com]
+ # mathces e.g. login1.example.com
+
+CAUTION! Be careful not to have more than one glob pattern section
+match any single host. This may lead to unpredictable results.
+
+=head1 COMMAND LINE OPTIONS
+
+Unless otherwise noted, options given in the configuration file will
+override any corresponding command line options.
+
+In general, avoid using the same options on command line and in the
+configuration file.
+
+=head1 CONFIGURATION
+
+=head2 GENERAL
+
+=over 4
+
+=item Check control
+
+Any keyword to the C<--check> parameter are accepted in the
+configuration file, as C<check_I<KEYWORD>>. These options take boolean
+values (C<true> or C<false>). The following keywords are accepted for
+check control, listed here with their default values:
+
+ check_storage = true
+ check_memory = true
+ check_fans = true
+ check_power = true
+ check_temp = true
+ check_cpu = true
+ check_voltage = true
+ check_batteries = true
+ check_amperage = true
+ check_intrusion = true
+ check_sdcard = true
+ check_esmhealth = true
+ check_esmlog = false
+ check_alertlog = false
+ check_everything = false
+
+If used together with the C<--check> command line option, the command
+line option will override the configuration file, if there is a
+conflict.
+
+The option C<check_everything> is special and turns on all
+checks. Setting this option to "true" will effectively negate any
+other check options. This option corresponds to the C<-a> or C<--all>
+command line option.
+
+For more information about check control, see
+L<check_openmanage(8)/CHECK CONTROL>.
+
+=item Blacklisting
+
+For blacklisting the keyword C<blacklist> is used, and the value is a
+string that uses the same syntax as the C<-b> or C<--blacklist>
+parameter. Example:
+
+ blacklist = ctrl_fw=all/pdisk=0:0:1
+
+If used together with the C<-b> or C<--blacklist> command line option,
+the two blacklists from the config file and command line are merged
+together.
+
+For more information about blacklisting, including syntax, see
+L<check_openmanage(8)/BLACKLISTING>.
+
+=item Timeout
+
+The plugin timeout can be configured with the C<timeout> keyword. The
+argument is number of seconds and should be a positive
+integer. Example:
+
+ timeout = 60
+
+The corresponding command line option is C<-t> or C<--timeout>.
+
+=item Performance data
+
+Performance data can be turned on in the configuration file with
+C<performance_data>. Accepted values are boolean (TRUE/FALSE) or
+either of the keywords "minimal" and "multiline". Example:
+
+ performance_data = true
+
+The corresponding command line option is C<-p> or C<--perfdata>.
+
+=item Legacy Performance data
+
+With version 3.7.0, performance data output changed. The new format is
+not compatible with the old format. Users who wish to postpone
+switching to the new performance data API may use this option. This
+option takes a boolean value. Example:
+
+ legacy_performance_data = true
+
+The corresponding command line option is C<--legacy-perfdata>.
+
+=item Temperature unit
+
+The temperature unit used for reporting, performance data etc. can be
+set with the C<temperature_unit> option. Allowed values are C<F> for
+Fahrenheit, C<C> for Celsius, C<K> for Kelvin and C<R> for
+Rankine. Example:
+
+ temperature_unit = F
+
+The corresponding command line option is C<--tempunit>. Note that the
+command line option C<-F> or C<--fahrenheit> will override both the
+command line option and the configuration file option.
+
+=item Temperature limits
+
+Custom temperature limits may be configured with the options
+C<temp_threshold_warning> and C<temp_threshold_critical>. These
+options corresponds to the command line options C<-w> or C<--warning>
+and C<-c> or C<--critical>, respectively. They take the same arguments
+as the command line options. Examples:
+
+ temp_threshold_warning = 0=30/10
+ temp_threshold_critical = 0=35/8
+
+=back
+
+=head2 SNMP OPTIONS
+
+Several SNMP related options may be set in the configuration file. The
+configuration file may contain the following SNMP options:
+
+=over 4
+
+=item SNMP community string
+
+The SNMP community string can be set with C<snmp_community>. Example:
+
+ snmp_community = mycommunity
+
+Corresponding command line option: C<-C> or C<--community>
+
+=item SNMP protocol version
+
+The SNMP protocol version can be set with C<snmp_version>. Example:
+
+ snmp_version = 2
+
+Corresponding command line option: C<-P> or C<--protocol>
+
+=item SNMP port number
+
+The remote port number used with SNMP can be set with
+C<snmp_port>. Example:
+
+ snmp_port = 161
+
+Corresponding command line option: C<--port>
+
+=item Use IPv6 instead of IPv4
+
+The option C<snmp_use_ipv6> instructs the plugin to use IPv6 instead
+of IPv4. This option takes a boolean value. Example:
+
+ snmp_use_ipv6 = true
+
+Corresponding command line option: C<-6> or C<--ipv6>
+
+=item Use TCP instead of UDP
+
+The option C<snmp_use_ipv6> instructs the plugin to use IPv6 instead
+of IPv4. This option takes a boolean value. Example:
+
+ snmp_use_tcp = true
+
+Corresponding command line option: C<--tcp>
+
+=back
+
+=head2 OUTPUT CONTROL
+
+These options gives some control over the output given by the plugin.
+
+=over 4
+
+=item Include servicetag in alerts
+
+The option C<output_servicetag> will make the plugin include the
+servers servicetag (serial number) in every alert. This option takes a
+boolean value. Example:
+
+ output_servicetag = true
+
+Corresponding command line option: C<-i> or C<--info>
+
+=item Include service state in alerts
+
+The option C<output_servicestate> will make the plugin include the
+service state in any alerts. This option takes a boolean
+value. Example:
+
+ output_servicestate = true
+
+Corresponding command line option: C<-s> or C<--state>
+
+=item Include abbreviated service state in alerts
+
+The option C<output_servicestate_abbr> will make the plugin include
+the abbreviated service state in any alerts. This option takes a
+boolean value. Example:
+
+ output_servicestate_abbr = true
+
+Corresponding command line option: C<-S> or C<--short-state>
+
+=item Show system info with alerts
+
+The option C<output_sysinfo> will make the plugin output some system
+information with alerts. This option takes a boolean value. Example:
+
+ output_sysinfo = true
+
+Corresponding command line option: C<-e> or C<--extinfo>
+
+=item Show blacklistings in OK output
+
+The option C<output_blacklist> will make the plugin show any
+blacklistings in the OK output. This option takes a boolean
+value. Example:
+
+ output_blacklist = true
+
+Corresponding command line option: C<-B> or C<--show-blacklist>
+
+=item Verbosity of OK output
+
+The option C<output_ok_verbosity> lets you adjust how much information
+is shown in the OK output. This option takes a positive integer as
+parameter. Example:
+
+ output_ok_verbosity = 3
+
+Corresponding command line option: C<-o> or C<--ok-info>
+
+=item HTML output
+
+The output C<output_html> makes the plugin produce HTML output. This
+option takes either a boolean value, or a country or area
+code. Example:
+
+ output_html = de
+
+Corresponding command line option: C<-I> or C<--htmlinfo>
+
+=item Custom line after alerts
+
+The option C<output_post_message> lets you specify one line of
+information to be shown after any alerts. This option takes a string
+as parameter. Examples:
+
+ output_post_message = OS: %o %r
+ output_post_message = NOTE: Handled in ticket 123456
+
+For more information about codes and formatting, see the corresponding
+command line option C<--postmsg> in L<check_openmanage(8)>.
+
+=back
+
+=head1 SEE ALSO
+
+L<check_openmanage(8)>
+L<http://folk.uio.no/trondham/software/check_openmanage.html>
+
+=cut
|
|
|
Changed |
check_openmanage-3.7.0.tar.bz2/check_openmanage.exe
^
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/check_openmanage.php
^
|
| @@ -4,7 +4,24 @@
# Author: Trond Hasle Amundsen
# Contact: t.h.amundsen@usit.uio.no
# Website: http://folk.uio.no/trondham/software/check_openmanage.html
-# Date: 2010-03-16
+# Date: 2011-08-15
+#
+# $Id: check_openmanage.php 20655 2011-08-15 13:16:38Z trondham $
+#
+# Copyright (C) 2008-2011 Trond H. Amundsen
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Array with different colors
$colors = array("0022ff", "22ff22", "ff0000", "00aaaa", "ff00ff",
@@ -13,20 +30,24 @@
"000000", "00FF00", "0080FF", "FF8000", "800000",
"FB31FB");
-# Color for power usage in watts
-$PWRcolor = "66FF00";
-
# Counters
-$count = 0; # general counter
$f = 0; # fan probe counter
$t = 0; # temp probe counter
$a = 0; # amp probe counter
+$v = 0; # volt probe counter
$e = 0; # enclosure counter
# Flags
-$visited_fan = 0;
-$visited_temp = 0;
-$visited_pwr = 0;
+$visited_amp = 0;
+
+# IDs
+$id_temp1 = 1;
+$id_temp2 = 2;
+$id_watt = 3;
+$id_amp = 4;
+$id_volt = 5;
+$id_fan = 6;
+$id_enc = 7;
# Enclosure id
$enclosure_id = '';
@@ -34,188 +55,491 @@
# Default title
$def_title = 'Dell OpenManage';
-# Loop through the performance data
-foreach ($DS as $i) {
-
- # AMPERAGE PROBE
- if(preg_match('/^pwr_mon_/', $NAME[$i]) || preg_match('/^p\d+[aw]$/', $NAME[$i])) {
+# Temperature unit
+if (!defined('tempunit_defined')) {
+ define('tempunit_defined', 1);
+
+ function tempunit($arg)
+ {
+ $unit = 'unknown';
+ $vlabel = 'unknown';
+
+ switch ($arg) {
+ default:
+ $vlabel = "Celsius";
+ $unit = "°C";
+ break;
+ case "F":
+ $vlabel = "Fahrenheit";
+ $unit = "°F";
+ break;
+ case "K":
+ $vlabel = "Kelvin";
+ $unit = "K";
+ break;
+ case "R":
+ $vlabel = "Rankine";
+ $unit = "°R";
+ break;
+ }
+ return array($unit, $vlabel);
+ }
+}
+
+
+# Determine if we're running in legacy mode
+$legacy = "no";
+foreach ($this->DS as $KEY=>$VAL) {
+ if (preg_match('/^(pwr_mon_|fan_|temp_|enclosure_|p\d+|f\d+|t\d+|e.+?t\d+)/', $VAL['LABEL'])) {
+ $legacy = "yes";
+ break;
+ }
+}
+
+#------------------------------------------------------
+# MAIN LOOP
+#------------------------------------------------------
+if ($legacy == "yes") { # --legacy--
+
+ $count = 0; # general counter
+ $PWRcolor = "66FF00";
+
+ # Flags
+ $visited_fan = 0;
+ $visited_temp = 0;
+ $visited_pwr = 0;
+
+ # Loop through the performance data
+ foreach ($this->DS as $KEY=>$VAL) {
+
+ # AMPERAGE PROBE
+ if(preg_match('/^pwr_mon_/', $VAL['NAME']) || preg_match('/^p\d+[aw]$/', $VAL['NAME'])) {
+
+ # Watt
+ if (preg_match('/system/', $VAL['NAME']) || preg_match('/^p\d+w$/', $VAL['NAME'])) {
+
+ # Long label
+ $VAL['NAME'] = preg_replace('/^pwr_mon_\d+_/', '', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/_/', ' ', $VAL['NAME']);
+
+ # Short label
+ $VAL['NAME'] = preg_replace('/^p(\d+)w$/', 'Power Probe $1', $VAL['NAME']);
+
+ ++$count;
+ $ds_name[$count] = "Power Consumption";
+ $vlabel = "Watt";
+
+ $title = $ds_name[$count];
+
+ $opt[$count] = "--slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
+
+ if(isset($def[$count])){
+ $def[$count] .= rrd::def("var".$KEY, $VAL['RRDFILE'], $VAL['DS'], "AVERAGE");
+ }
+ else {
+ $def[$count] = rrd::def("var".$KEY, $VAL['RRDFILE'], $VAL['DS'], "AVERAGE");
+ }
+ $def[$count] .= rrd::area("var$KEY", "#".$PWRcolor, $VAL['NAME']);
+ $def[$count] .= rrd::line1("var$KEY","#000000");
+ $def[$count] .= rrd::gprint("var$KEY",array("LAST", "MAX", "AVERAGE"), "%6.0lf W");
+ }
+ # Ampere
+ elseif (preg_match('/current/', $VAL['NAME']) || preg_match('/^p\d+a$/', $VAL['NAME'])) {
+
+ # Long label
+ $VAL['NAME'] = preg_replace('/^pwr_mon_\d+_/', '', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/_/', ' ', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/ current \d+$/', '', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/ps/', 'PowerSupply', $VAL['NAME']);
+
+ # Short label
+ $VAL['NAME'] = preg_replace('/^p(\d+)a$/', 'Amperage Probe $1', $VAL['NAME']);
+
+ if ($visited_pwr == 0) {
+ ++$count;
+ $visited_pwr = 1;
+ }
+ $ds_name[$count] = "Amperage Probes";
+ $vlabel = "Ampere";
+
+ $title = $ds_name[$count];
+
+ $opt[$count] = "-X0 --lower-limit 0 --slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
+ if(isset($def[$count])){
+ $def[$count] .= rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+ else {
+ $def[$count] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+ $def[$count] .= rrd::line1("var$KEY", "#".$colors[$a], $VAL['NAME']) ;
+ $def[$count] .= rrd::area("var$KEY","#".$colors[$a++]."20") ;
+ $def[$count] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%4.2lf A") ;
+ }
+ }
+
+ # FANS (RPMs)
+ if(preg_match('/^fan_/', $VAL['NAME']) || preg_match('/^f\d+$/', $VAL['NAME'])){
+ if ($visited_fan == 0) {
+ ++$count;
+ $visited_fan = 1;
+ }
- # Watt
- if (preg_match('/system/', $NAME[$i]) || preg_match('/^p\d+w$/', $NAME[$i])) {
-
# Long label
- $NAME[$i] = preg_replace('/^pwr_mon_\d+_/', '', $NAME[$i]);
- $NAME[$i] = preg_replace('/_/', ' ', $NAME[$i]);
+ $VAL['NAME'] = preg_replace('/^fan_\d+_/', '', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/_rpm$/', '', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/_/', ' ', $VAL['NAME']);
# Short label
- $NAME[$i] = preg_replace('/^p(\d+)w$/', 'Power Probe $1', $NAME[$i]);
+ $VAL['NAME'] = preg_replace('/^f(\d+)$/', 'Fan Probe $1', $VAL['NAME']);
- ++$count;
- $ds_name[$count] = "Power Consumption";
- $vlabel = "Watt";
+ $ds_name[$count] = "Fan Speed";
+
+ $opt[$count] = "-X0 --slope-mode --vertical-label \"RPMs\" --title \"$def_title: Fan Speeds\" ";
+ if(isset($def[$count])){
+ $def[$count] .= rrd::def("var$KEY", $VAL['RRDFILE'], $VAL['DS'], "AVERAGE") ;
+ }
+ else {
+ $def[$count] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE");
+ }
+ $def[$count] .= rrd::line1("var$KEY", "#".$colors[$f++],$VAL['NAME']);
+ $def[$count] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%6.0lf RPM");
+ }
+
+ # TEMPERATURES (Celsius)
+ if(preg_match('/^temp_/', $VAL['NAME']) || preg_match('/^t\d+$/', $VAL['NAME'])){
+ if ($visited_temp == 0) {
+ ++$count;
+ $visited_temp = 1;
+ }
+
+ # Long label
+ $VAL['NAME'] = preg_replace('/^temp_\d+_/', '', $VAL['NAME']);
+ $VAL['NAME'] = preg_replace('/_/', ' ', $VAL['NAME']);
+
+ # Short label
+ $VAL['NAME'] = preg_replace('/^t(\d+)$/', 'Temperature Probe $1', $VAL['NAME']);
- $title = $ds_name[$count];
+ $ds_name[$count] = "Chassis Temperatures";
- $opt[$count] = "--slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
+ $warnThresh = "INF";
+ $critThresh = "INF";
+ if ($VAL['WARN'] != "") {
+ $warnThresh = $VAL['WARN'];
+ }
+ if ($VAL['CRIT'] != "") {
+ $critThresh = $VAL['CRIT'];
+ }
+
+ $opt[$count] = "--slope-mode --vertical-label \"Celsius\" --title \"$def_title: Chassis Temperatures\" ";
if(isset($def[$count])){
- $def[$count] .= "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
+ $def[$count] .= rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
}
else {
- $def[$count] = "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
+ $def[$count] = rrd::def("var$KEY", $VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
}
- $def[$count] .= "AREA:var$i#$PWRcolor:\"$NAME[$i]\" " ;
- $def[$count] .= "LINE:var$i#000000: " ;
- $def[$count] .= "GPRINT:var$i:LAST:\"%6.0lf W last \" ";
- $def[$count] .= "GPRINT:var$i:MAX:\"%6.0lf W max \" ";
- $def[$count] .= "GPRINT:var$i:AVERAGE:\"%6.2lf W avg \\n\" ";
+ $def[$count] .= rrd::line1("var$KEY", "#".$colors[$t++], $VAL['NAME']);
+ $def[$count] .= rrd::gprint("var$KEY",array("LAST", "MAX", "AVERAGE"),"%6.0lf C");
}
- # Ampere
- elseif (preg_match('/current/', $NAME[$i]) || preg_match('/^p\d+a$/', $NAME[$i])) {
+
+ # ENCLOSURE TEMPERATURES (Celsius)
+ if(preg_match('/^enclosure_(?P<id>.+?)_temp_\d+$/', $VAL['NAME'], $matches)
+ || preg_match('/^e(?P<id>.+?)t\d+$/', $VAL['NAME'], $matches)) {
+ $this_id = $matches['id'];
+
+ if ($enclosure_id != $this_id) {
+ $e = 0;
+ ++$count;
+ $enclosure_id = $this_id;
+ }
# Long label
- $NAME[$i] = preg_replace('/^pwr_mon_\d+_/', '', $NAME[$i]);
- $NAME[$i] = preg_replace('/_/', ' ', $NAME[$i]);
- $NAME[$i] = preg_replace('/ current \d+$/', '', $NAME[$i]);
- $NAME[$i] = preg_replace('/ps/', 'PowerSupply', $NAME[$i]);
+ $VAL['NAME'] = preg_replace('/^enclosure_.+?_temp_(\d+)$/', 'Probe $1', $VAL['NAME']);
# Short label
- $NAME[$i] = preg_replace('/^p(\d+)a$/', 'Amperage Probe $1', $NAME[$i]);
-
- if ($visited_pwr == 0) {
- ++$count;
- $visited_pwr = 1;
+ $VAL['NAME'] = preg_replace('/^e.+?t(\d+)$/', 'Probe $1', $VAL['NAME']);
+
+ $ds_name[$count] = "Enclosure $enclosure_id Temperatures";
+
+ $warnThresh = "INF";
+ $critThresh = "INF";
+
+ if ($VAL['WARN'] != "") {
+ $warnThresh = $VAL['WARN'];
+ }
+ if ($VAL['CRIT'] != "") {
+ $critThresh = $VAL['CRIT'];
}
- $ds_name[$count] = "Amperage Probes";
- $vlabel = "Ampere";
- $title = $ds_name[$count];
+ $opt[$count] = "--slope-mode --vertical-label \"Celsius\" --title \"$def_title: Enclosure $enclosure_id Temperatures\" ";
- $opt[$count] = "-X0 --lower-limit 0 --slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
if(isset($def[$count])){
- $def[$count] .= "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
+ $def[$count] .= rrd::def("var$KEY", $VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
}
else {
- $def[$count] = "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
+ $def[$count] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
}
- $def[$count] .= "LINE:var$i#".$colors[$a].":\"$NAME[$i]\" " ;
- $def[$count] .= "AREA:var$i#".$colors[$a++]."20: " ;
- $def[$count] .= "GPRINT:var$i:LAST:\"%4.2lf A last \" ";
- $def[$count] .= "GPRINT:var$i:MAX:\"%4.2lf A max \" ";
- $def[$count] .= "GPRINT:var$i:AVERAGE:\"%4.4lf A avg \\n\" ";
+ $def[$count] .= rrd::line1("var$KEY","#".$colors[$e++],$VAL['NAME']) ;
+ $def[$count] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%6.0lf C");
}
}
-
- # FANS (RPMs)
- if(preg_match('/^fan_/', $NAME[$i]) || preg_match('/^f\d+$/', $NAME[$i])){
- if ($visited_fan == 0) {
- ++$count;
- $visited_fan = 1;
- }
-
- # Long label
- $NAME[$i] = preg_replace('/^fan_\d+_/', '', $NAME[$i]);
- $NAME[$i] = preg_replace('/_rpm$/', '', $NAME[$i]);
- $NAME[$i] = preg_replace('/_/', ' ', $NAME[$i]);
-
- # Short label
- $NAME[$i] = preg_replace('/^f(\d+)$/', 'Fan Probe $1', $NAME[$i]);
-
- $ds_name[$count] = "Fan Speed";
-
- $opt[$count] = "-X0 --slope-mode --vertical-label \"RPMs\" --title \"$def_title: Fan Speeds\" ";
- if(isset($def[$count])){
- $def[$count] .= "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
- }
- else {
- $def[$count] = "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
- }
- $def[$count] .= "LINE:var$i#".$colors[$f++].":\"$NAME[$i]\" " ;
- $def[$count] .= "GPRINT:var$i:LAST:\"%6.0lf RPM last \" ";
- $def[$count] .= "GPRINT:var$i:MAX:\"%6.0lf RPM max \" ";
- $def[$count] .= "GPRINT:var$i:AVERAGE:\"%6.2lf RPM avg \\n\" ";
- }
+}
+else { # --new--
- # TEMPERATURES (Celsius)
- if(preg_match('/^temp_/', $NAME[$i]) || preg_match('/^t\d+$/', $NAME[$i])){
- if ($visited_temp == 0) {
- ++$count;
- $visited_temp = 1;
- }
+ # Loop through the performance data
+ foreach ($this->DS as $KEY=>$VAL) {
+
+ $label = $VAL['LABEL'];
- # Long label
- $NAME[$i] = preg_replace('/^temp_\d+_/', '', $NAME[$i]);
- $NAME[$i] = preg_replace('/_/', ' ', $NAME[$i]);
+ # TEMPERATURES (AMBIENT)
+ if (preg_match('/^T/', $label) && preg_match('/Ambient/', $label)) {
- # Short label
- $NAME[$i] = preg_replace('/^t(\d+)$/', 'Temperature Probe $1', $NAME[$i]);
+ # Temperature unit and vertical label
+ list ($unit, $vlabel) = tempunit($VAL['UNIT']);
- $ds_name[$count] = "Chassis Temperatures";
+ # Long label
+ $label = preg_replace('/^T(\d+)_(.+)/', '$2', $label);
+ $label = preg_replace('/_/', ' ', $label);
- $warnThresh = "INF";
- $critThresh = "INF";
+ # Short label
+ $label = preg_replace('/^T(\d+)$/', 'Probe $1', $label);
- if ($WARN[$i] != "") {
- $warnThresh = $WARN[$i];
- }
- if ($CRIT[$i] != "") {
- $critThresh = $CRIT[$i];
- }
+ $ds_name[$id_temp1] = "Temperatures";
- $opt[$count] = "--slope-mode --vertical-label \"Celsius\" --title \"$def_title: Chassis Temperatures\" ";
- if(isset($def[$count])){
- $def[$count] .= "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
- }
- else {
- $def[$count] = "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
- }
- $def[$count] .= "LINE:var$i#".$colors[$t++].":\"$NAME[$i]\" " ;
- $def[$count] .= "GPRINT:var$i:LAST:\"%6.0lf C last \" ";
- $def[$count] .= "GPRINT:var$i:MAX:\"%6.0lf C max \" ";
- $def[$count] .= "GPRINT:var$i:AVERAGE:\"%6.2lf C avg \\n\" ";
- }
+ $opt[$id_temp1] = "--slope-mode --vertical-label \"$vlabel\" --title \"$def_title: Ambient Temperature\" ";
+ if(isset($def[$id_temp1])){
+ $def[$id_temp1] .= rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+ else {
+ $def[$id_temp1] = rrd::def("var$KEY", $VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+
+ # fancy graphing
+ $def[$id_temp1] .= rrd::gradient("var$KEY","#114480", "#1144dc", $label, 10, "50%");
+ $def[$id_temp1] .= rrd::gprint("var$KEY",array("LAST", "MAX", "AVERAGE"),"%5.1lf $unit");
+
+ # insert extra vertical space if we have thresholds
+ if ($VAL['WARN'] != "" || $VAL['CRIT'] != "") {
+ $def[$id_temp1] .= "COMMENT:\\s ";
+ }
+
+ # warning threshold
+ if ($VAL['WARN'] != "") {
+ $warnThresh = $VAL['WARN'];
+ $def[$id_temp1] .= rrd::cdef("warn$KEY", "var$KEY,$warnThresh,GT,var$KEY,UNKN,IF");
+ $def[$id_temp1] .= rrd::gradient("warn$KEY","#c4c400", "#ffff00","Above Upper Warning Threshold\: $warnThresh $unit\\l", 10, "50%");
+ }
- # ENCLOSURE TEMPERATURES (Celsius)
- if(preg_match('/^enclosure_(?<id>.+?)_temp_\d+$/', $NAME[$i], $matches)
- || preg_match('/^e(?<id>.+?)t\d+$/', $NAME[$i], $matches)){
- $this_id = $matches['id'];
+ # critical threshold
+ if ($VAL['CRIT'] != "") {
+ $critThresh = $VAL['CRIT'];
+ $def[$id_temp1] .= rrd::cdef("crit$KEY", "var$KEY,$critThresh,GT,var$KEY,UNKN,IF");
+ $def[$id_temp1] .= rrd::gradient("crit$KEY","#800000", "#dc0000","Above Upper Critical Threshold\: $critThresh $unit\\l", 10, "50%");
+ }
+ }
+
+ # TEMPERATURES
+ if (preg_match('/^T/', $label) && !preg_match('/Ambient/', $label)) {
+
+ # Temperature unit and vertical label
+ list ($unit, $vlabel) = tempunit($VAL['UNIT']);
+
+ # Long label
+ $label = preg_replace('/^T(\d+)_(.+)/', '$2', $label);
+ $label = preg_replace('/_/', ' ', $label);
- if ($enclosure_id != $this_id) {
- $e = 0;
- ++$count;
- $enclosure_id = $this_id;
+ # Short label
+ $label = preg_replace('/^T(\d+)$/', 'Probe $1', $label);
+
+ $ds_name[$id_temp2] = "Temperatures";
+
+ $opt[$id_temp2] = "--slope-mode --vertical-label \"$vlabel\" --title \"$def_title: Chassis Temperatures\" ";
+ if (isset($def[$id_temp2])) {
+ $def[$id_temp2] .= rrd::def("var$KEY", $VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+ else {
+ $def[$id_temp2] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+ $def[$id_temp2] .= rrd::line1("var$KEY", "#".$colors[$t++], rrd::cut($label,20) );
+ $def[$id_temp2] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"), "%4.1lf $unit");
}
- # Long label
- $NAME[$i] = preg_replace('/^enclosure_.+?_temp_(\d+)$/', 'Probe $1', $NAME[$i]);
+ # WATTAGE PROBE
+ if (preg_match('/^W/', $label)) {
+
+ # Long label
+ $label = preg_replace('/^W(\d+)_(.+)/', '$2', $label);
+ $label = preg_replace('/_/', ' ', $label);
+
+ # Short label
+ $label = preg_replace('/^W(\d+)$/', 'Probe $1', $label);
+
+ $ds_name[$id_watt] = "Power Consumption";
+ $vlabel = "Watt";
+
+ $title = $ds_name[$id_watt];
- # Short label
- $NAME[$i] = preg_replace('/^e.+?t(\d+)$/', 'Probe $1', $NAME[$i]);
+ $opt[$id_watt] = "--slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
+
+ if(isset($def[$id_watt])){
+ $def[$id_watt] .= rrd::def("var$KEY",$VAL['RRDFILE'], $VAL['DS'], "AVERAGE") ;
+ }
+ else {
+ $def[$id_watt] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE") ;
+ }
+
+ # calculate kWh and BTU
+ $def[$id_watt] .= "VDEF:tot$KEY=var$KEY,TOTAL ";
+ # rrd:vdef is broken in pnp4nagios 0.6.13 # $def[$id_watt] .= rrd::vdef("tot$KEY","var$KEY,TOTAL");
+ $def[$id_watt] .= rrd::cdef("kwh$KEY","var$KEY,POP,tot$KEY,1000,/,60,/,60,/");
+ $def[$id_watt] .= rrd::cdef("btu$KEY","kwh$KEY,3412.3,*");
+
+ # fancy graphing
+ $def[$id_watt] .= rrd::gradient("var$KEY","#800000","#dc0000","$label", 10, "50%");
+
+ # print avg, max and min
+ $def[$id_watt] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%6.0lf W");
+
+ # print kWh and BTU for time period
+ $def[$id_watt] .= rrd::comment("\\s");
+ $def[$id_watt] .= rrd::comment(" Total power used in time period\:");
+ $def[$id_watt] .= rrd::gprint("kwh$KEY","AVERAGE","%10.2lf kWh\l");
+ $def[$id_watt] .= rrd::comment(" ");
+ $def[$id_watt] .= rrd::gprint("btu$KEY","AVERAGE","%10.2lf BTU\l");
+ }
+
+ # AMPERAGE PROBE
+ if (preg_match('/^A/', $label)) {
+
+ $first = 0;
+ if ($visited_amp == 0) {
+ $first = 1;
+ $visited_amp = 1;
+ }
+
+ # Long label
+ $label = preg_replace('/^A(\d+)_(.+)/', '$2', $label);
+ $label = preg_replace('/_/', ' ', $label);
+
+ # Short label
+ $label = preg_replace('/^A(\d+)$/', 'Probe $1', $label);
+
+ $ds_name[$id_amp] = "Amperage Probes";
+ $vlabel = "Ampere";
+
+ $title = $ds_name[$id_amp];
+
+ $opt[$id_amp] = "-X0 --lower-limit 0 --slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
+ if(isset($def[$id_amp])){
+ $def[$id_amp] .= rrd::def("var$KEY",$VAL['RRDFILE'], $VAL['DS'], "AVERAGE");
+ }
+ else {
+ $def[$id_amp] = rrd::def("var$KEY",$VAL['RRDFILE'], $VAL['DS'], "AVERAGE");
+ }
- $ds_name[$count] = "Enclosure $enclosure_id Temperatures";
+ $space = strlen($label) < 16 ? str_repeat(' ', 16 - strlen($label)) : ' ';
- $warnThresh = "INF";
- $critThresh = "INF";
+ $def[$id_amp] .= rrd::cdef("tier$KEY", "var$KEY,10,/");
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."b7::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."bf::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."c7::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."cf::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."d7::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."df::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."e7::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."ef::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."f7::STACK ";
+ $def[$id_amp] .= "AREA:tier$KEY#".$colors[$a]."ff:\"$label$space\":STACK ";
+ $a++;
- if ($WARN[$i] != "") {
- $warnThresh = $WARN[$i];
+ if ($first) {
+ $def[$id_amp] .= rrd::cdef("sum$KEY", "var$KEY,0,+");
+ }
+ else {
+ $def[$id_amp] .= rrd::cdef("sum$KEY", "sum".($KEY-1).",var$KEY,+");
+ }
+ $def[$id_amp] .= rrd::line1("sum$KEY", "#555555");
+ $def[$id_amp] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%6.1lf A last") ;
}
- if ($CRIT[$i] != "") {
- $critThresh = $CRIT[$i];
+
+ # VOLTAGE PROBE
+ if (preg_match('/^V/', $label)) {
+
+ # Long label
+ $label = preg_replace('/^V(\d+)_(.+)/', '$2', $label);
+ $label = preg_replace('/_/', ' ', $label);
+
+ # Short label
+ $label = preg_replace('/^V(\d+)$/', 'Probe $1', $label);
+
+ $ds_name[$id_volt] = "Voltage Probes";
+ $vlabel = "Volts";
+
+ $title = $ds_name[$id_volt];
+
+ $opt[$id_volt] = "--slope-mode --vertical-label \"$vlabel\" --title \"$def_title: $title\" ";
+ if(isset($def[$id_volt])){
+ $def[$id_volt] .= rrd::def("var$KEY", $VAL['RRDFILE'], $VAL['DS'],"AVERAGE");
+ }
+ else {
+ $def[$id_volt] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'],"AVERAGE");
+ }
+ $def[$id_volt] .= rrd::line1("var$KEY", "#".$colors[$v++], rrd::cut($label,18) ) ;
+ $def[$id_volt] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%8.2lf V");
}
- $opt[$count] = "--slope-mode --vertical-label \"Celsius\" --title \"$def_title: Enclosure $enclosure_id Temperatures\" ";
+ # FANS (RPMs)
+ if (preg_match('/^F/', $label)) {
+
+ # Long label
+ $label = preg_replace('/^F(\d+)_(.+)/', '$2', $label);
+ $label = preg_replace('/_/', ' ', $label);
+
+ # Short label
+ $label = preg_replace('/^F(\d+)$/', 'Probe $1', $label);
+
+ $ds_name[$id_fan] = "Fan Probes";
- if(isset($def[$count])){
- $def[$count] .= "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
+ $opt[$id_fan] = "-X0 --slope-mode --vertical-label \"RPMs\" --title \"$def_title: Fan Speeds\" ";
+ if(isset($def[$id_fan])){
+ $def[$id_fan] .= rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'], "AVERAGE") ;
+ }
+ else {
+ $def[$id_fan] = rrd::def("var$KEY",$VAL['RRDFILE'],$VAL['DS'], "AVERAGE") ;
+ }
+ $def[$id_fan] .= rrd::line1("var$KEY", "#".$colors[$f++], rrd::cut($label,18) ) ;
+ $def[$id_fan] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"), "%6.0lf RPM");
}
- else {
- $def[$count] = "DEF:var$i=$rrdfile:$DS[$i]:AVERAGE " ;
+
+ # ENCLOSURE TEMPERATURES (Celsius)
+ if (preg_match('/^E(?P<encl>.+?)_t(emp_)?(?P<probe>\d+)/', $label, $matches)) {
+
+ $this_id = $matches['encl'];
+ $probe_index = $matches['probe'];
+
+ if ($enclosure_id != $this_id) {
+ $e = 0;
+ $id_enc++;
+ $enclosure_id = $this_id;
+ }
+
+ # Label
+ $label = "Probe $probe_index";
+
+ $ds_name[$id_enc] = "Enclosure $enclosure_id Temperatures";
+
+ $opt[$id_enc] = "--slope-mode --vertical-label \"Celsius\" --title \"$def_title: Enclosure $enclosure_id Temperatures\" ";
+
+ if(isset($def[$id_enc])){
+ $def[$id_enc] .= rrd::def("var$KEY", $VAL['RRDFILE'],$VAL['DS'], "AVERAGE") ;
+ }
+ else {
+ $def[$id_enc] = rrd::def("var$KEY", $VAL['RRDFILE'],$VAL['DS'], "AVERAGE") ;
+ }
+ $def[$id_enc] .= rrd::line1("var$KEY", "#".$colors[$e++], rrd::cut($label, 14) );
+ $def[$id_enc] .= rrd::gprint("var$KEY", array("LAST", "MAX", "AVERAGE"),"%6.1lf C");
}
- $def[$count] .= "LINE:var$i#".$colors[$e++].":\"$NAME[$i]\" " ;
- $def[$count] .= "GPRINT:var$i:LAST:\"%6.0lf C last \" ";
- $def[$count] .= "GPRINT:var$i:MAX:\"%6.0lf C max \" ";
- $def[$count] .= "GPRINT:var$i:AVERAGE:\"%6.2lf C avg \\n\" ";
}
}
+
?>
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/check_openmanage.pod
^
|
| @@ -2,7 +2,7 @@
#
# pod2man -s 8 -r "`./check_openmanage -V | head -n 1`" -c 'Nagios plugin' check_openmanage.pod check_openmanage.8
#
-# $Id: check_openmanage.pod 19334 2011-02-08 16:41:21Z trondham $
+# $Id: check_openmanage.pod 20420 2011-06-27 08:02:05Z trondham $
=head1 NAME
@@ -33,6 +33,11 @@
=over 4
+=item -f, --config I<FILE>
+
+Specify a configuration file. For reference on the config file syntax
+and options, consult the L<check_openmanage.conf(5)> manual page.
+
=item -t, --timeout I<SECONDS>
The number of seconds after which the plugin will abort. Default
@@ -54,6 +59,12 @@
If given the argument C<multiline>, the plugin will output the
performance data on multiple lines, for Nagios 3.x and above.
+=item --legacy-perfdata
+
+With version 3.7.0, performance data output changed. The new format is
+not compatible with the old format. Users who wish to postpone
+switching to the new performance data API may set this option.
+
=item -w, --warning I<STRING> or I<FILE>
Override the machine-default temperature warning thresholds. Syntax is
@@ -79,6 +90,16 @@
Override the machine-default temperature critical thresholds. Syntax
and behaviour is the same as for warning thresholds described above.
+=item -F, --fahrenheit
+
+Set Fahrenheit as unit for all temperatures. This option will override
+the C<--tempunit> option, if used simultaneously.
+
+=item --tempunit I<CHAR>
+
+Set temperature unit. Legal values are C<F> for Fahrenheit, C<C> for
+Celsius, C<K> for Kelvin and C<R> for Rankine.
+
=item -o, --ok-info I<NUMBER>
This option lets you define how much output you want the plugin to
@@ -437,6 +458,10 @@
Physical disk.
+=item B<pdisk_cert>
+
+Suppress warning message about non-certified physical disk.
+
=item B<vdisk>
Logical drive (virtual disk)
@@ -746,6 +771,7 @@
=head1 SEE ALSO
+L<check_openmanage.conf(5)>
L<http://folk.uio.no/trondham/software/check_openmanage.html>
=cut
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/debian/changelog
^
|
| @@ -1,3 +1,9 @@
+check-openmanage (3.7.0-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- Trond Hasle Amundsen <t.h.amundsen@usit.uio.no> Mon, 15 Aug 2011 14:00:00 +0200
+
check-openmanage (3.6.8-1) unstable; urgency=low
* New upstream release.
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/debian/rules
^
|
| @@ -45,6 +45,7 @@
dh_installdocs
dh_installexamples check_openmanage.php
dh_installman check_openmanage.8
+ dh_installman check_openmanage.conf.5
dh_link
dh_strip
dh_compress
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/install.sh
^
|
| @@ -9,7 +9,7 @@
# Default install locations
def_plugindir=${libdir}/nagios/plugins
-def_mandir=/usr/share/man/man8
+def_mandir=/usr/share/man
# Find install locations
if [ "$1" = "-q" ]; then
@@ -28,6 +28,9 @@
fi
fi
+man5dir=$mandir/man5
+man8dir=$mandir/man8
+
# Error if plugin dir doesn't exist
if [ -d $plugindir ]; then
:
@@ -48,7 +51,8 @@
# Install
install -p -m 0755 check_openmanage $plugindir
-install -m 0644 check_openmanage.8 $mandir
+install -m 0644 check_openmanage.8 $man8dir
+install -m 0644 check_openmanage.conf.5 $man5dir
# Done
echo "done."
|
|
[-]
[+]
|
Changed |
check_openmanage-3.7.0.tar.bz2/nagios-plugins-check-openmanage.spec
^
|
| @@ -6,7 +6,7 @@
%global debug_package %{nil}
Name: nagios-plugins-check-openmanage
-Version: 3.6.8
+Version: 3.7.0
Release: 1%{?dist}
Summary: Nagios plugin to monitor hardware health on Dell servers
@@ -36,13 +36,16 @@
%build
pod2man -s 8 -r "%{plugin} %{version}" -c "Nagios plugin" %{plugin}.pod %{plugin}.8
+pod2man -s 5 -r "%{plugin} %{version}" -c "Nagios plugin" %{plugin}.conf.pod %{plugin}.5
%install
%{__rm} -rf %{buildroot}
-%{__install} -d %{buildroot}%{nagiospluginsdir}
-%{__install} -d %{buildroot}%{_mandir}/man8
+%{__install} -d -m 0755 %{buildroot}%{nagiospluginsdir}
+%{__install} -d -m 0755 %{buildroot}%{_mandir}/man8
+%{__install} -d -m 0755 %{buildroot}%{_mandir}/man5
%{__install} -pD -m 0755 %{plugin} %{buildroot}%{nagiospluginsdir}
%{__install} -pD -m 0644 %{plugin}.8 %{buildroot}%{_mandir}/man8
+%{__install} -pD -m 0644 %{plugin}.conf.5 %{buildroot}%{_mandir}/man5
%clean
%{__rm} -rf %{buildroot}
@@ -52,9 +55,13 @@
%doc README COPYING CHANGES
%{nagiospluginsdir}/*
%{_mandir}/man8/*.8*
+%{_mandir}/man5/*.5*
%changelog
+* Mon Aug 15 2011 Trond H. Amundsen <t.h.amundsen@usit.uio.no> - 3.7.0-1
+- Version 3.7.0
+
* Tue Jun 06 2011 Trond H. Amundsen <t.h.amundsen@usit.uio.no> - 3.6.8-1
- Version 3.6.8
|
