Changes - j0ke.net Open Build Service

Changes of Revision 2

[-] [+]	Changed	amavisd-milter.spec
@@ -0,0 +1,214 @@ +Summary: Milter helper for Amavisd-new +Name: amavisd-milter +Version: 1.6.0 +Release: 1 +License: Petr Rehor <rx@rx.cz>. All rights reserved. +Group: System Environment/Daemons +URL: http://amavisd-milter.sourceforge.net/ + +Packager: Jo Rhett <jrhett@netconsonance.com> +Vendor: Amavisd-new + +Source: http://sourceforge.net/projects/amavisd-milter/files/amavisd-milter/amavisd-milter-1.6.0/amavisd-milter-1.6.0.tar.gz +BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root + +Requires: amavisd-new sendmail-milter + +%description +amavisd-milter is a milter (mail filter) for amavisd-new 2.4.3 and above which uses the AM.PDP protocol. +It has been tested to work with mail servers sendmail 8.13+ and postfix 2.9+ + +%prep +%setup -n %{name}-%{version} + +%{__cat} <<'EOF' >amavisd-milter.sysconfig +# User to run under (must be same as amavisd daemon) +AMAVIS_USER=amavis + +# Set working directory (default /var/amavis). +#WORKING_DIRECTORY=/var/amavis + +# Communication socket between sendmail and amavisd-milter (default +# /var/amavis/amavisd-milter.sock). The protocol spoken over this +# socket is MILTER (Mail FILTER). It must agree with the +# INPUT_MAIL_FILTER entry in sendmail.mc +# The socket should be in "proto:address" format: +# o {unix\|local}:/path/to/file - A named pipe. +# o inet:port@{hostname\|ip-address} - An IPV4 socket. +# o inet6:port@{hostname\|ip-address} - An IPV6 socket. +#SOCKET=/var/amavis/amavisd-milter.sock + +# Use this pid file (default /var/amavis/amavisd-milter.pid). +# Better to create /var/run/amavis and put it there +#PID_FILE=/var/run/amavis/amavisd-milter.pid + +# Maximum concurrent amavisd connections (default 0 - unlimited +# number of connections). It must agree with the $max_servers +# entry in amavisd.conf. +#MAX_CONNECTIONS=0 + +# Maximum wait for connection to amavisd in seconds (default 300 = +# 5 minutes). It must be less then sending MTA timeout for a +# response to the final "." that terminates a message on sending +# MTA. sendmail has default value 1 hour, postfix 10 minutes and +# qmail 20 minutes. We suggest to use less than 10 minutes. +#MAX_WAIT=300 + +# sendmail connection timeout in seconds (default 600 = 10 min- +# utes). It must agree with the INPUT_MAIL_FILTER entry in send- +# mail.mc and must be greater than or equal to the amavisd-new con- +# nection timeout. When you use other milters (especially time- +# consuming), the timeout must be sufficient to process message in +# all milters. +#MAILDAEMON_TIMEOUT=600 + +# amavisd-new connection timeout in seconds (default 600 = 10 min- +# utes). This timeout must be sufficient for message processing in +# amavisd-new. It's usually a good idea to adjust them to the same +# value as sendmail connection timeout. +#AMAVISD_TIMEOUT=600 +EOF + +%{__cat} <<'EOF' >amavisd-milter.init +#!/bin/bash +# +# Init script for amavisd-milter +# Copyright (c) 2005, Petr Rehor <rx@rx.cz>. All rights reserved. +# +# chkconfig: 2345 71 41 +# description: amavisd-milter +# +# processname: amavisd-milter +# pidfile: %{_localstatedir}/run/amavis/amavisd-milter.pid + +source %{_initrddir}/functions +[ -r %{_sysconfdir}/amavisd.conf ] \|\| exit 1 + +### Read configuration +SYSCONFIG="%{_sysconfdir}/sysconfig/amavisd-milter" +[ -r "$SYSCONFIG" ] && source "$SYSCONFIG" + +# Defaults which must be set +if [ -z $AMAVIS_USER ]; then + AMAVIS_USER=amavis +fi +if [ -z $WORKING_DIRECTORY ]; then + WORKING_DIRECTORY=/var/amavis +fi +if [ -z $PID_FILE ]; then + PID_FILE=/var/amavis/amavisd-milter.pid +fi +if [ -z $SOCKET ]; then + SOCKET=var/amavis/amavisd-milter.sock +fi +OPTIONS="-s $SOCKET -p $PID_FILE -w $WORKING_DIRECTORY" + +if [ ! -z $MAX_CONNECTIONS ]; then + OPTIONS="$OPTIONS -m $MAX_CONNECTIONS" +fi +if [ ! -z $MAX_WAIT ]; then + OPTIONS="$OPTIONS -M $MAX_WAIT" +fi +if [ ! -z $MAILDAEMON_TIMEOUT ]; then + OPTIONS="$OPTIONS -t $MAILDAEMON_TIMEOUT" +fi +if [ ! -z $AMAVISD_TIMEOUT ]; then + OPTIONS="$OPTIONS -T $AMAVISD_TIMEOUT" +fi + +RETVAL=0 +prog="amavisd-milter" +desc="Amavisd milter helper" + +start() { + echo -n $"Starting $desc ($prog): " + daemon --user ${AMAVIS_USER} --pidfile=${PID_FILE} %{_sbindir}/$prog ${OPTIONS} + RETVAL=$? + echo + [ $RETVAL -eq 0 ] && touch %{_localstatedir}/lock/subsys/$prog + return $RETVAL +} + +stop() { + echo -n $"Shutting down $desc ($prog): " + killproc -p ${PID_FILE} $prog + RETVAL=$? + echo + [ $RETVAL -eq 0 ] && rm -f %{_localstatedir}/lock/subsys/$prog + return $RETVAL +} + +restart() { + stop + start +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart) + restart + ;; + condrestart) + [ -e %{_localstatedir}/lock/subsys/$prog ] && restart + RETVAL=$? + ;; + status) + status -p ${PID_FILE} $prog + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start\|stop\|restart\|condrestart\|status}" + RETVAL=1 +esac + +exit $RETVAL +EOF + +%build +%configure +make %{?_smp_mflags} + +%install +%{__rm} -rf %{buildroot} +%makeinstall +%{__install} -D -m0755 amavisd-milter.init %{buildroot}%{_initrddir}/amavisd-milter +%{__install} -D -m0644 amavisd-milter.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/amavisd-milter + +%clean +%{__rm} -rf %{buildroot} + +%pre + +%post +/sbin/chkconfig --add amavisd-milter + +%preun +if [ $1 -eq 0 ] ; then + /sbin/service amavisd-milter stop &>/dev/null \|\| : + /sbin/chkconfig --del amavisd-milter +fi + +%postun +if [ $1 -ne 0 ]; then + /sbin/service amavisd-milter condrestart &>/dev/null \|\| : +fi