| @@ -0,0 +1,278 @@
+#! /bin/sh
+# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany.
+# All rights reserved.
+#
+# Author: Kurt Garloff
+# Please send feedback to http://www.suse.de/feedback/
+#
+# /etc/init.d/proftpd
+# and its symbolic link
+# /(usr/)sbin/rcproftpd
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# Template system startup script for some example service/daemon proftpd
+#
+# LSB compatible service control script; see http://www.linuxbase.org/spec/
+#
+# Note: This template uses functions rc_XXX defined in /etc/rc.status on
+# UnitedLinux (UL) based Linux distributions. If you want to base your
+# script on this template and ensure that it works on non UL based LSB
+# compliant Linux distributions, you either have to provide the rc.status
+# functions from UL or change the script to work without them.
+#
+### BEGIN INIT INFO
+# Provides: proftpd
+# Required-Start: $syslog $remote_fs
+# Should-Start: $time ypbind sendmail
+# Required-Stop: $syslog $remote_fs
+# Should-Stop: $time ypbind sendmail
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 6
+# Short-Description: proftpd XYZ daemon providing ZYX
+# Description: Start proftpd to allow XY and provide YZ
+### END INIT INFO
+#
+# Any extensions to the keywords given above should be preceeded by
+# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB.
+#
+# Notes on Required-Start/Should-Start:
+# * There are two different issues that are solved by Required-Start
+# and Should-Start
+# (a) Hard dependencies: This is used by the runlevel editor to determine
+# which services absolutely need to be started to make the start of
+# this service make sense. Example: nfsserver should have
+# Required-Start: $portmap
+# Also, required services are started before the dependent ones.
+# The runlevel editor will warn about such missing hard dependencies
+# and suggest enabling. During system startup, you may expect an error,
+# if the dependency is not fulfilled.
+# (b) Specifying the init script ordering, not real (hard) dependencies.
+# This is needed by insserv to determine which service should be
+# started first (and at a later stage what services can be started
+# in parallel). The tag Should-Start: is used for this.
+# It tells, that if a service is available, it should be started
+# before. If not, never mind.
+# * When specifying hard dependencies or ordering requirements, you can
+# use names of services (contents of their Provides: section)
+# or pseudo names starting with a $. The following ones are available
+# according to LSB (1.1):
+# $local_fs all local file systems are mounted
+# (most services should need this!)
+# $remote_fs all remote file systems are mounted
+# (note that /usr may be remote, so
+# many services should Require this!)
+# $syslog system logging facility up
+# $network low level networking (eth card, ...)
+# $named hostname resolution available
+# $netdaemons all network daemons are running
+# The $netdaemons pseudo service has been removed in LSB 1.2.
+# For now, we still offer it for backward compatibility.
+# These are new (LSB 1.2):
+# $time the system time has been set correctly
+# $portmap SunRPC portmapping service available
+# UnitedLinux extensions:
+# $ALL indicates that a script should be inserted
+# at the end
+# * The services specified in the stop tags
+# (Required-Stop/Should-Stop)
+# specify which services need to be still running when this service
+# is shut down. Often the entries there are just copies or a subset
+# from the respective start tag.
+# * Should-Start/Stop are now part of LSB as of 2.0,
+# formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop.
+# insserv does support both variants.
+# * X-UnitedLinux-Default-Enabled: yes/no is used at installation time
+# (%fillup_and_insserv macro in %post of many RPMs) to specify whether
+# a startup script should default to be enabled after installation.
+# It's not used by insserv.
+#
+# Note on runlevels:
+# 0 - halt/poweroff 6 - reboot
+# 1 - single user 2 - multiuser without network exported
+# 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm)
+#
+# Note on script names:
+# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html
+# A registry has been set up to manage the init script namespace.
+# http://www.lanana.org/
+# Please use the names already registered or register one or use a
+# vendor prefix.
+
+
+# Check for missing binaries (stale symlinks should not happen)
+# Note: Special treatment of stop for LSB conformance
+PROFTPD_BIN=/usr/sbin/proftpd
+test -x $PROFTPD_BIN || { echo "$PROFTPD_BIN not installed";
+ if [ "$1" = "stop" ]; then exit 0;
+ else exit 5; fi; }
+
+# Check for existence of needed config file and read it
+#PROFTPD_CONFIG=/etc/sysconfig/proftpd
+#test -r $PROFTPD_CONFIG || { echo "$PROFTPD_CONFIG not existing";
+# if [ "$1" = "stop" ]; then exit 0;
+# else exit 6; fi; }
+#
+# Read config
+#. $PROFTPD_CONFIG
+
+# Source LSB init functions
+# providing start_daemon, killproc, pidofproc,
+# log_success_msg, log_failure_msg and log_warning_msg.
+# This is currently not used by UnitedLinux based distributions and
+# not needed for init scripts for UnitedLinux only. If it is used,
+# the functions from rc.status should not be sourced or used.
+#. /lib/lsb/init-functions
+
+# Shell functions sourced from /etc/rc.status:
+# rc_check check and set local and overall rc status
+# rc_status check and set local and overall rc status
+# rc_status -v be verbose in local rc status and clear it afterwards
+# rc_status -v -r ditto and clear both the local and overall rc status
+# rc_status -s display "skipped" and exit with status 3
+# rc_status -u display "unused" and exit with status 3
+# rc_failed set local and overall rc status to failed
+# rc_failed <num> set local and overall rc status to <num>
+# rc_reset clear both the local and overall rc status
+# rc_exit exit appropriate to overall rc status
+# rc_active checks whether a service is activated by symlinks
+. /etc/rc.status
+
+# Reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0 - success
+# 1 - generic or unspecified error
+# 2 - invalid or excess argument(s)
+# 3 - unimplemented feature (e.g. "reload")
+# 4 - user had insufficient privileges
+# 5 - program is not installed
+# 6 - program is not configured
+# 7 - program is not running
+# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
+#
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signaling is not supported) are
+# considered a success.
+
+case "$1" in
+ start)
+ echo -n "Starting proftpd "
+ ## Start daemon with startproc(8). If this fails
+ ## the return value is set appropriately by startproc.
+ /sbin/startproc $PROFTPD_BIN
+
+ # Remember status and be verbose
+ rc_status -v
+ ;;
+ stop)
+ echo -n "Shutting down proftpd "
+ ## Stop daemon with killproc(8) and if this fails
+ ## killproc sets the return value according to LSB.
+
+ /sbin/killproc -TERM $PROFTPD_BIN
+
+ # Remember status and be verbose
+ rc_status -v
+ ;;
+ try-restart|condrestart)
+ ## Do a restart only if the service was active before.
+ ## Note: try-restart is now part of LSB (as of 1.9).
+ ## RH has a similar command named condrestart.
+ if test "$1" = "condrestart"; then
+ echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+ fi
+ $0 status
|
