| @@ -0,0 +1,218 @@
+#
+# When we also provide SSL we have to listen to the
+# the HTTPS port in addition.
+#
+Listen 443 https
+
+##
+## SSL Global Context
+##
+## All SSL configuration in this context applies both to
+## the main server and all SSL-enabled virtual hosts.
+##
+
+# Pass Phrase Dialog:
+# Configure the pass phrase gathering process.
+# The filtering dialog program (`builtin' is a internal
+# terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog
+
+# Inter-Process Session Cache:
+# Configure the SSL Session Cache: First the mechanism
+# to use and second the expiring timeout (in seconds).
+#SSLSessionCache dc:UNIX:/var/cache/mod_ssl/distcache
+SSLSessionCache shmcb:/var/cache/mod_ssl/scache(512000)
+SSLSessionCacheTimeout 300
+
+# Pseudo Random Number Generator (PRNG):
+# Configure one or more sources to seed the PRNG of the
+# SSL library. The seed data should be of good random quality.
+# WARNING! On some platforms /dev/random blocks if not enough entropy
+# is available. This means you then cannot use the /dev/random device
+# because it would lead to very long connection times (as long as
+# it requires to make more entropy available). But usually those
+# platforms additionally provide a /dev/urandom device which doesn't
+# block. So, if available, use this one instead. Read the mod_ssl User
+# Manual for more details.
+SSLRandomSeed startup file:/dev/urandom 256
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random 512
+#SSLRandomSeed connect file:/dev/random 512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+#
+# Use "SSLCryptoDevice" to enable any supported hardware
+# accelerators. Use "openssl engine -v" to list supported
+# engine names. NOTE: If you enable an accelerator and the
+# server does not start, consult the error logs and ensure
+# your accelerator is functioning properly.
+#
+SSLCryptoDevice builtin
+#SSLCryptoDevice ubsec
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:443>
+
+# General setup for the virtual host, inherited from global configuration
+#DocumentRoot "/var/www/html"
+#ServerName www.example.com:443
+
+# Use separate log files for the SSL virtual host; note that LogLevel
+# is not inherited from httpd.conf.
+ErrorLog logs/ssl_error_log
+TransferLog logs/ssl_access_log
+LogLevel warn
+
+# SSL Engine Switch:
+# Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+# SSL Protocol support:
+# List the enable protocol levels with which clients will be able to
+# connect. Disable SSLv2 access by default:
+SSLProtocol all -SSLv2
+
+# SSL Cipher Suite:
+# List the ciphers that the client is permitted to negotiate.
+# See the mod_ssl documentation for a complete list.
+SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
+
+# Speed-optimized SSL Cipher configuration:
+# If speed is your main concern (on busy HTTPS servers e.g.),
+# you might want to force clients to specific, performance
+# optimized ciphers. In this case, prepend those ciphers
+# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
+# Caveat: by giving precedence to RC4-SHA and AES128-SHA
+# (as in the example below), most connections will no longer
+# have perfect forward secrecy - if the server's key is
+# compromised, captures of past or future traffic must be
+# considered compromised, too.
+#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
+#SSLHonorCipherOrder on
+
+# Server Certificate:
+# Point SSLCertificateFile at a PEM encoded certificate. If
+# the certificate is encrypted, then you will be prompted for a
+# pass phrase. Note that a kill -HUP will prompt again. A new
+# certificate can be generated using the genkey(1) command.
+SSLCertificateFile /etc/pki/tls/certs/localhost.crt
+
+# Server Private Key:
+# If the key is not combined with the certificate, use this
+# directive to point at the key file. Keep in mind that if
+# you've both a RSA and a DSA private key you can configure
+# both in parallel (to also allow the use of DSA ciphers, etc.)
+SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
+
+# Server Certificate Chain:
+# Point SSLCertificateChainFile at a file containing the
+# concatenation of PEM encoded CA certificates which form the
+# certificate chain for the server certificate. Alternatively
+# the referenced file can be the same as SSLCertificateFile
+# when the CA certificates are directly appended to the server
+# certificate for convinience.
+#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
+
+# Certificate Authority (CA):
+# Set the CA certificate verification path where to find CA
+# certificates for client authentication or alternatively one
+# huge file containing all of them (file must be PEM encoded)
+#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
+
+# Client Authentication (Type):
+# Client certificate verification type and depth. Types are
+# none, optional, require and optional_no_ca. Depth is a
+# number which specifies how deeply to verify the certificate
+# issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth 10
+
+# Access Control:
+# With SSLRequire you can do per-directory access control based
+# on arbitrary complex boolean expressions containing server
+# variable checks and other lookup directives. The syntax is a
+# mixture between C and Perl. See the mod_ssl documentation
+# for more details.
+#<Location />
+#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
+# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+# SSL Engine Options:
+# Set various options for the SSL engine.
+# o FakeBasicAuth:
+# Translate the client X.509 into a Basic Authorisation. This means that
+# the standard Auth/DBMAuth methods can be used for access control. The
+# user name is the `one line' version of the client's X.509 certificate.
+# Note that no password is obtained from the user. Every entry in the user
+# file needs this password: `xxj31ZMTZzkVA'.
+# o ExportCertData:
+# This exports two additional environment variables: SSL_CLIENT_CERT and
+# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+# server (always existing) and the client (only existing when client
+# authentication is used). This can be used to import the certificates
+# into CGI scripts.
+# o StdEnvVars:
+# This exports the standard SSL/TLS related `SSL_*' environment variables.
+# Per default this exportation is switched off for performance reasons,
+# because the extraction step is an expensive operation and is usually
+# useless for serving static content. So one usually enables the
+# exportation for CGI and SSI requests only.
+# o StrictRequire:
+# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+# under a "Satisfy any" situation, i.e. when it applies access is denied
+# and no other module can change it.
+# o OptRenegotiate:
+# This enables optimized SSL connection renegotiation handling when SSL
+# directives are used in per-directory context.
+#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+<Files ~ "\.(cgi|shtml|phtml|php3?)$">
+ SSLOptions +StdEnvVars
+</Files>
+<Directory "/var/www/cgi-bin">
+ SSLOptions +StdEnvVars
+</Directory>
+
+# SSL Protocol Adjustments:
+# The safe and default but still SSL/TLS standard compliant shutdown
+# approach is that mod_ssl sends the close notify alert but doesn't wait for
+# the close notify alert from client. When you need a different shutdown
+# approach you can use one of the following variables:
+# o ssl-unclean-shutdown:
+# This forces an unclean shutdown when the connection is closed, i.e. no
+# SSL close notify alert is send or allowed to received. This violates
+# the SSL/TLS standard but is needed for some brain-dead browsers. Use
+# this when you receive I/O errors because of the standard approach where
+# mod_ssl sends the close notify alert.
+# o ssl-accurate-shutdown:
+# This forces an accurate shutdown when the connection is closed, i.e. a
+# SSL close notify alert is send and mod_ssl waits for the close notify
+# alert of the client. This is 100% SSL/TLS standard compliant, but in
+# practice often causes hanging connections with brain-dead browsers. Use
+# this only for browsers where you know that their SSL implementation
|
