Changes - j0ke.net Open Build Service

Changes of Revision 6

[-] [+]	Deleted	recode.spec
@@ -1,161 +0,0 @@ -Summary: Conversion between character sets and surfaces -Name: recode -Version: 3.6 -Release: 22%{?dist} -License: GPL -Group: Applications/File -Source: http://recode.progiciels-bpi.ca/archives/recode-%{version}.tar.gz -Patch0: recode.patch -Patch1: recode-3.6-getcwd.patch -Url: http://recode.progiciels-bpi.ca/ -BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) - -Requires(post): /sbin/install-info -Requires(post): /sbin/ldconfig -Requires(preun): /sbin/install-info -Requires(postun): /sbin/ldconfig - - -%description -The `recode' converts files between character sets and usages. -It recognises or produces nearly 150 different character sets -and is able to transliterate files between almost any pair. When exact -transliteration are not possible, it may get rid of the offending -characters or fall back on approximations. Most RFC 1345 character sets -are supported. - -%package devel -Summary: Header files and static libraries for development using recode -Group: Development/Libraries -Requires: %{name} = %{version}-%{release} - -%description devel -The `recode' library converts files between character sets and usages. -The library recognises or produces nearly 150 different character sets -and is able to transliterate files between almost any pair. When exact -transliteration are not possible, it may get rid of the offending -characters or fall back on approximations. Most RFC 1345 character sets -are supported. - -%prep -%setup -q -%patch0 -p1 -%patch1 -p1 -b .getcwd - -%build -%configure --disable-static -make %{?_smp_mflags} - -%install -rm -rf $RPM_BUILD_ROOT - -%makeinstall -%find_lang %{name} - -# remove unpackaged file from the buildroot -rm -f $RPM_BUILD_ROOT%{_infodir}/dir - -# remove libtool archives -rm -f $RPM_BUILD_ROOT%{_libdir}/.la - - -%post -/sbin/ldconfig -/sbin/install-info %{_infodir}/recode.info.gz %{_infodir}/dir --entry=" recode: (recode). Conversion between character sets and surfaces." \|\| : - -%preun -if [ $1 = 0 ]; then - /sbin/install-info --delete %{_infodir}/recode.info.gz %{_infodir}/dir --entry="* recode: (recode). Conversion between character sets and surfaces." \|\| : -fi - -%postun -p /sbin/ldconfig - -%clean -rm -rf $RPM_BUILD_ROOT - -%files -f %{name}.lang -%defattr(-,root,root) -%doc AUTHORS COPYING* ChangeLog NEWS README THANKS TODO -%{_mandir}// -%{_infodir}/recode.info* -%{_bindir}/* -%{_libdir}/.so.0 - -%files devel -%defattr(-,root,root) -%{_libdir}/.so -%{_includedir}/ - -%changelog -* Fri Sep 01 2006 Zoltan Kota <z.kota[AT]gmx.net> 3.6-22 -- rebuild - -* Mon Feb 13 2006 Zoltan Kota <z.kota[AT]gmx.net> 3.6-21 -- rebuild - -* Thu Dec 22 2005 Zoltan Kota <z.kota[AT]gmx.net> 3.6-20 -- rebuild - -* Fri Aug 26 2005 Zoltan Kota <z.kota[AT]gmx.net> 3.6-19 -- fix requires -- disable static libs and remove libtool archives -- add %%doc - -* Fri Aug 26 2005 Zoltan Kota <z.kota[AT]gmx.net> 3.6-18 -- add dist tag -- specfile cleanup - -* Thu May 26 2005 Bill Nottingham <notting@redhat.com> 3.6-17 -- rebuild for Extras - -* Mon Mar 07 2005 Than Ngo <than@redhat.com> 3.6-16 -- cleanup - -* Sat Mar 05 2005 Than Ngo <than@redhat.com> 3.6-15 -- rebuilt - -* Wed Feb 09 2005 Than Ngo <than@redhat.com> 3.6-14 -- rebuilt - -* Tue Jun 15 2004 Elliot Lee <sopwith@redhat.com> -- rebuilt - -* Tue Mar 02 2004 Elliot Lee <sopwith@redhat.com> -- rebuilt - -* Fri Feb 13 2004 Elliot Lee <sopwith@redhat.com> -- rebuilt - -* Fri Feb 13 2004 Than Ngo <than@redhat.com> 3.6-11 -- add a patch file from kota@szbk.u-szeged.hu (bug #115524) - -* Thu Nov 20 2003 Thomas Woerner <twoerner@redhat.com> 3.6-10 -- Fixed RPATH (missing make in %%build) - -* Wed Jun 04 2003 Elliot Lee <sopwith@redhat.com> -- rebuilt - -* Wed Jan 22 2003 Tim Powers <timp@redhat.com> -- rebuilt - -* Wed Dec 11 2002 Tim Powers <timp@redhat.com> 3.6-7 -- rebuild on all arches -- remove unpackaged file from the buildroot - -* Fri Jun 21 2002 Tim Powers <timp@redhat.com> -- automated rebuild - -* Thu May 23 2002 Tim Powers <timp@redhat.com> -- automated rebuild - -* Mon Apr 15 2002 Bill Nottingham <notting@redhat.com> 3.6-4 -- add ldconfig %post/%postun - -* Tue Feb 26 2002 Than Ngo <than@redhat.com> 3.6-3 -- rebuild - -* Wed Jan 09 2002 Tim Powers <timp@redhat.com> -- automated rebuild - -* Tue Nov 13 2001 Than Ngo <than@redhat.com> 3.6-1 -- initial RPM for 8.0
[-] [+]	Added	recode-3.6-gettext.patch ^
@@ -0,0 +1,11 @@ +--- m4/gettext.m4 ++++ m4/gettext.m4 +@@ -87,7 +87,7 @@ + AC_CHECK_HEADERS(argz.h limits.h locale.h malloc.h string.h unistd.h sys/param.h) + AC_FUNC_MMAP + AC_CHECK_FUNCS(getcwd mempcpy munmap setlocale stpcpy strcasecmp strchr strdup __argz_count __argz_stringify __argz_next) +- AM_LC_MESSAGES ++ gt_LC_MESSAGES + + if test -z "$ALL_LINGUAS"; then + AC_MSG_WARN(This package does not install translations yet.)
[-] [+]	Added	recode-3.6-locale.patch ^
@@ -0,0 +1,15 @@ +--- src/main.c ++++ src/main.c +@@ -393,7 +393,12 @@ + if (strncmp (program_name, "lt-", 3) == 0) + program_name += 3; + ++#ifdef LC_MESSAGES ++ setlocale (LC_MESSAGES, ""); ++ setlocale (LC_CTYPE, ""); ++#else + setlocale (LC_ALL, ""); ++#endif + bindtextdomain (PACKAGE, LOCALEDIR); + textdomain (PACKAGE); +
[-] [+]	Added	recode-3.6-memleak.patch ^
@@ -0,0 +1,58 @@ +2000-07-26 Andreas Schwab <schwab@suse.de> + + * names.c (alias_free): New function. + (prepare_for_aliases): Pass it to hash_initialize. + * outer.c (recode_delete_outer): Free elements of + argmatch_charset_array and argmatch_surface_array. + +--- recode-3.5d/src/names.c.~2~ Wed Jul 26 19:02:19 2000 ++++ recode-3.5d/src/names.c Wed Jul 26 19:02:28 2000 +@@ -101,6 +101,20 @@ + return strcmp (first->name, second->name) == 0; + } + ++static void ++alias_free (void void_alias) ++{ ++ RECODE_ALIAS alias = void_alias; ++ struct recode_surface_list list, next; ++ ++ for (list = alias->implied_surfaces; list != NULL; list = next) ++ { ++ next = list->next; ++ free (list); ++ } ++ free (alias); ++} ++ + bool + prepare_for_aliases (RECODE_OUTER outer) + { +@@ -108,7 +122,7 @@ + outer->number_of_symbols = 0; + + outer->alias_table +- = hash_initialize (800, NULL, alias_hasher, alias_comparator, free); ++ = hash_initialize (800, NULL, alias_hasher, alias_comparator, alias_free); + if (!outer->alias_table) + return false; + +--- recode-3.5d/src/outer.c.~2~ Wed Jul 26 19:00:41 2000 ++++ recode-3.5d/src/outer.c Wed Jul 26 19:00:59 2000 +@@ -608,7 +608,15 @@ + if (outer->alias_table) + hash_free (outer->alias_table); + if (outer->argmatch_charset_array) +- free (outer->argmatch_charset_array); ++ { ++ char cursor; ++ ++ for (cursor = outer->argmatch_charset_array; cursor; cursor++) ++ free (cursor); ++ for (cursor = outer->argmatch_surface_array; cursor; cursor++) ++ free (*cursor); ++ free (outer->argmatch_charset_array); ++ } + if (outer->one_to_same) + free (outer->one_to_same); + free (outer);
[-] [+]	Added	recode-3.6-task.patch ^
@@ -0,0 +1,11 @@ +--- src/task.c ++++ src/task.c +@@ -1198,6 +1198,8 @@ + else + success = transform_mere_copy (subtask); + ++ task->output = subtask->output; ++ + if (subtask->input.name && subtask->input.name) + fclose (subtask->input.file); + if (subtask->output.name && subtask->output.name)
[-] [+]	Changed	recode-3.6.patch ^
@@ -1,11 +1,112 @@ ---- recode-3.6/lib/gettext.c.orig 2005-03-07 12:18:30.000000000 +0100 -+++ recode-3.6/lib/gettext.c 2005-03-07 12:23:14.000000000 +0100 -@@ -1668,8 +1668,6 @@ - # if !defined HAVE_GETCWD - char getwd (); - # define getcwd(buf, max) getwd (buf) --# else --char getcwd (); - # endif - # ifndef HAVE_STPCPY - static char stpcpy PARAMS ((char dest, const char src)); +--- configure.in ++++ configure.in +@@ -7,7 +7,7 @@ + AM_CONFIG_HEADER(config.h) + AM_INIT_AUTOMAKE(recode, 3.6) + AT_CONFIG(../src) +-ALL_LINGUAS="da de el es fr gl it nl pl pt sl sv" ++ALL_LINGUAS="cs da de el es fr gl it nl pl pt sl sv" + + AC_PROG_CC + AC_AIX +@@ -32,9 +32,7 @@ + + jm_FUNC_MALLOC + jm_FUNC_REALLOC +-AC_SUBST(LIBOBJS) + +-AC_CANONICAL_HOST + jm_LANGINFO_CODESET + jm_GLIBC21 + +@@ -43,11 +41,11 @@ + + # This is necessary so that .o files in LIBOBJS are also built via + # the ANSI2KNR-filtering rules. +-LIBOBJS=`echo $LIBOBJS \| sed 's/\.o /\$U.o /g;s/\.o$/\$U.o/'` ++LIB@&t@OBJS=`echo "$LIB@&t@OBJS" \| sed 's,\.[[^.]] ,$U&,g;s,\.[[^.]]$,$U&,'` + + LTALLOCA=`echo $ALLOCA \| sed 's/\.o/.lo/g'` + AC_SUBST(LTALLOCA) +-LTLIBOBJS=`echo $LIBOBJS \| sed 's/\.o /.lo /g;s/\.o$/.lo/'` ++LTLIBOBJS=`echo "$LIB@&t@OBJS" \| sed 's,\.[[^.]] ,.lo ,g;s,\.[[^.]]$,.lo,'` + AC_SUBST(LTLIBOBJS) + + AC_OUTPUT(Makefile contrib/Makefile doc/Makefile i18n/Makefile lib/Makefile +--- m4/gettext.m4 ++++ m4/gettext.m4 +@@ -76,7 +76,7 @@ + with_included_gettext=yes + fi + if test $with_included_gettext = yes; then +- LIBOBJS="$LIBOBJS gettext.o" ++ AC_LIBOBJ([gettext]) + AC_DEFINE(HAVE_GETTEXT) + AC_DEFINE(HAVE_DCGETTEXT) + else +--- m4/malloc.m4 ++++ m4/malloc.m4 +@@ -27,8 +27,7 @@ + jm_cv_func_working_malloc=no) + ]) + if test $jm_cv_func_working_malloc = no; then +- AC_SUBST(LIBOBJS) +- LIBOBJS="$LIBOBJS malloc.$ac_objext" ++ AC_LIBOBJ([malloc]) + AC_DEFINE_UNQUOTED(malloc, rpl_malloc, + [Define to rpl_malloc if the replacement function should be used.]) + fi +--- m4/realloc.m4 ++++ m4/realloc.m4 +@@ -27,8 +27,7 @@ + jm_cv_func_working_realloc=no) + ]) + if test $jm_cv_func_working_realloc = no; then +- AC_SUBST(LIBOBJS) +- LIBOBJS="$LIBOBJS realloc.$ac_objext" ++ AC_LIBOBJ([realloc]) + AC_DEFINE_UNQUOTED(realloc, rpl_realloc, + [Define to rpl_realloc if the replacement function should be used.]) + fi +--- src/libiconv.c ++++ src/libiconv.c +@@ -195,12 +195,17 @@ + memcpy() doesn't do here, because the regions might overlap. + memmove() isn't worth it, because we rarely have to move more + than 12 bytes. / +- if (input > input_buffer && input_left > 0) ++ cursor = input_buffer; ++ if (input_left > 0) + { +- cursor = input_buffer; +- do +- cursor++ = input++; +- while (--input_left > 0); ++ if (input > input_buffer) ++ { ++ do ++ cursor++ = input++; ++ while (--input_left > 0); ++ } ++ else ++ cursor += input_left; + } + } + +--- src/request.c ++++ src/request.c +@@ -1073,13 +1073,12 @@ + if (task->output.cursor + 4 >= task->output.limit) + { + RECODE_OUTER outer = task->request->outer; +- size_t old_size = task->output.limit - task->output.buffer; + size_t new_size = task->output.cursor + 4 - task->output.buffer; + + /* FIXME: Rethink about how the error should be reported. */ + if (REALLOC (task->output.buffer, new_size, char)) + { +- task->output.cursor = task->output.buffer + old_size; ++ task->output.cursor = task->output.buffer + new_size - 4; + task->output.limit = task->output.buffer + new_size; + } + }
[-] [+]	Added	recode-gcc43.patch ^
@@ -0,0 +1,11 @@ +--- src/recodext.h ++++ src/recodext.h +@@ -218,7 +218,7 @@ + enum recode_symbol_type type : 3; + + /* Non zero if this one should be ignored. */ +- bool ignore : 2; ++ bool ignore : 1; + }; + + struct recode_surface_list
[-] [+]	Deleted	recode.patch ^
@@ -1,68 +0,0 @@ ---- recode-3.6.orig/src/libiconv.c -+++ recode-3.6/src/libiconv.c -@@ -1,5 +1,5 @@ - /* Conversion of files between different charsets and surfaces. -- Copyright © 1999, 2000 Free Software Foundation, Inc. -+ Copyright © 1999, 2000, 2001 Free Software Foundation, Inc. - Contributed by François Pinard <pinard@iro.umontreal.ca>, 1999, - and Bruno Haible <haible@clisp.cons.org>, 2000. - -@@ -195,12 +195,17 @@ - memcpy() doesn't do here, because the regions might overlap. - memmove() isn't worth it, because we rarely have to move more - than 12 bytes. / -- if (input > input_buffer && input_left > 0) -+ cursor = input_buffer; -+ if (input_left > 0) - { -- cursor = input_buffer; -- do -- cursor++ = input++; -- while (--input_left > 0); -+ if (input > input_buffer) -+ { -+ do -+ cursor++ = input++; -+ while (--input_left > 0); -+ } -+ else -+ cursor += input_left; - } - } - ---- recode-3.6.orig/src/request.c -+++ recode-3.6/src/request.c -@@ -1073,7 +1073,7 @@ - if (task->output.cursor + 4 >= task->output.limit) - { - RECODE_OUTER outer = task->request->outer; -- size_t old_size = task->output.limit - task->output.buffer; -+ size_t old_size = task->output.cursor - task->output.buffer; - size_t new_size = task->output.cursor + 4 - task->output.buffer; - - / FIXME: Rethink about how the error should be reported. / ---- recode-3.6.orig/src/task.c -+++ recode-3.6/src/task.c -@@ -1198,6 +1198,8 @@ - else - success = transform_mere_copy (subtask); - -+ task->output = subtask->output; -+ - if (subtask->input.name && subtask->input.name) - fclose (subtask->input.file); - if (subtask->output.name && subtask->output.name) ---- recode-3.6.orig/src/hash.h -+++ recode-3.6/src/hash.h -@@ -21,6 +21,11 @@ - / Make sure USE_OBSTACK is defined to 1 if you want the allocator to use - obstacks instead of malloc, and recompile `hash.c' with same setting. */ - -+#define hash_lookup recode_hash_lookup -+#define hash_delete recode_hash_delete -+#define hash_free recode_hash_free -+#define hash_insert recode_hash_insert -+ - #ifndef PARAMS - # if PROTOTYPES \|\| __STDC__ - # define PARAMS(Args) Args
[-] [+]	Added	cs_recode.po ^
@@ -0,0 +1,510 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Free Software Foundation, Inc. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: recode 3.5\n" +"POT-Creation-Date: 2000-11-13 11:29+0100\n" +"PO-Revision-Date: 2000-11-13 11:29+0100\n" +"Last-Translator: Petr Blaha <pblaha@suse.cz>\n" +"Language-Team: Czech <cs@li.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-2\n" +"Content-Transfer-Encoding: 8-bit\n" + +#. Dump all characters. +#: src/debug.c:287 +msgid "" +"UCS2 Mne Description\n" +"\n" +msgstr "" +"UCS2 Mne Popis\n" +"\n" + +#: src/main.c:140 +msgid "No error" +msgstr "bez chyby" + +#: src/main.c:143 +msgid "Non canonical input" +msgstr "Nekanonický vstup" + +#: src/main.c:146 +msgid "Ambiguous output" +msgstr "Dvojznaèný výstup" + +#: src/main.c:149 +msgid "Untranslatable input" +msgstr "Nepøelo¾itelný vstup" + +#: src/main.c:152 +msgid "Invalid input" +msgstr "Neplatný vstup" + +#: src/main.c:155 +msgid "System detected problem" +msgstr "Systém zjistil problém" + +#: src/main.c:158 +msgid "Misuse of recoding library" +msgstr "Nesprávné u¾ití knihovny recoding" + +#: src/main.c:161 +msgid "Internal recoding bug" +msgstr "Vnitøní chyba pøevodu" + +#: src/main.c:206 +msgid "" +"This program is free software; you can redistribute it and/or modify\n" +"it under the terms of the GNU General Public License as published by\n" +"the Free Software Foundation; either version 2, or (at your option)\n" +"any later version.\n" +"\n" +"This program is distributed in the hope that it will be useful,\n" +"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +"GNU General Public License for more details.\n" +"\n" +"You should have received a copy of the GNU General Public License\n" +"along with this program; if not, write to the Free Software Foundation,\n" +"Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" +msgstr "" + +#: src/main.c:231 +#, c-format +msgid "Try `%s %s' for more information.\n" +msgstr "Zkus `%s %s' pro více informací.\n" + +#: src/main.c:235 +msgid "" +"Free `recode' converts files between various character sets and surfaces.\n" +msgstr "" +"Free `recode' pøevádí soubory mezi rùznými znakovými sadami a kódováními.\n" + +#: src/main.c:239 +#, c-format +msgid "" +"\n" +"Usage: %s [OPTION]... [ [CHARSET] \| REQUEST [FILE]... ]\n" +msgstr "" +"\n" +"Pou¾ití: %s [PØEPÍNAÈ]... [ [ZNAKOVÁ SADA] \| PO®ADAVEK [SOUBOR]... ]\n" + +#: src/main.c:242 +msgid "" +"\n" +"If a long option shows an argument as mandatory, then it is mandatory\n" +"for the equivalent short option also. Similarly for optional arguments.\n" +msgstr "" +"\n" +"Kdy¾ dlouhý pøepínaè ukazuje na povinný argument, tak je také povinný\n" +"pro ekvivalentní krátný pøepínaè. Podobnì je to také volitelné argumenty.\n" + + +#: src/main.c:248 +msgid "" +"\n" +"Listings:\n" +" -l, --list[=FORMAT] list one or all known charsets\n" +" -k, --known=PAIRS restrict charsets according to known PAIRS " +"list\n" +" -h, --header[=[LN/]NAME] write table NAME on stdout using LN, then exit\n" +" -F, --freeze-tables write out a C module holding all tables\n" +" -T, --find-subsets report all charsets being subset of others\n" +" -C, --copyright display Copyright and copying conditions\n" +" --help display this help and exit\n" +" --version output version information and exit\n" +msgstr "" +"\n" +"Seznamy:\n" +" -l, --list[=FORMÁT] seznam jedné nebo v¹ech známých znakových sad\n" +" -k, --known=DVOJICE omezená znaková sada podle známých DVOJIC" +"seznam\n" +" -h, --header[=[LN/]JMÉNO] zapi¹ tabulku JMÉNO na standartní výtup\n" +" pou¾itím LN a poté skonèi\n" +" -F, --freeze-tables write out a C module holding all tables\n" +" -T, --find-subsets report all charsets being subset of others\n" +" -C, --copyright zobraz Copyright a podmínky pro kopírování\n" +" --help zobraz tuto nápovìdu a skonèi\n" +" --version vypi¹ informaci o verzi a skonèi\n" + +#: src/main.c:261 +msgid "" +"\n" +"Operation modes:\n" +" -v, --verbose explain sequence of steps and report progress\n" +" -q, --quiet, --silent inhibit messages about irreversible recodings\n" +" -f, --force force recodings even when not reversible\n" +" -t, --touch touch the recoded files after replacement\n" +" -i, --sequence=files use intermediate files for sequencing passes\n" +" --sequence=memory use memory buffers for sequencing passes\n" +msgstr "" +"\n" +"Funkèní módy:\n" +" -v, --verbose uka¾ sekvence krokù a vypisuj postup\n" +" -q, --quiet, --silent zabraò zprávám o nevratném pøevádìní\n" +" -f, --force force recodings even when not reversible\n" +" -t, --touch touch the recoded files after replacement\n" +" -i, --sequence=files pou¾ij pøechodné soubory pro sekvenèní prùchod\n" +" --sequence=memory pou¾ij vyrovnávací pamìt pro sekvenèní prùchod\n" + +#: src/main.c:273 +msgid " -p, --sequence=pipe use pipe machinery for sequencing passes\n" +msgstr " -p, --sequence=pipe pou¾ij rouru pro sekvenèní prùchod\n" + + +#: src/main.c:278 +msgid " -p, --sequence=pipe same as -i (on this system)\n" +msgstr " -p, --sequence=pipe stejné jako -i (v tomto systému)\n" + + +#: src/main.c:283 +msgid "" +"\n" +"Fine tuning:\n" +" -s, --strict use strict mappings, even loose characters\n" +" -d, --diacritics convert only diacritics or alike for HTML/LaTeX\n" +" -S, --source[=LN] limit recoding to strings and comments as for LN\n" +" -c, --colons use colons instead of double quotes for diaeresis\n" +" -g, --graphics approximate IBMPC rulers by ASCII graphics\n" +" -x, --ignore=CHARSET ignore CHARSET while choosing a recoding path\n" +msgstr "" +"\n" +"Vyladìní:\n" +" -s, --strict pou¾ij pøesné mapování, jenom pøi characters\n" +" -d, --diacritics pøevádìj jenom diakritiku nebo jako pro HTML/LaTeX\n" +" -S, --source[=LN] limit recoding to strings and comments as for LN\n" +" -c, --colons use colons instead of double quotes for diaeresis\n" +" -g, --graphics pøibli¾ IBMPC pravidla ASCII grafice\n" +" -x, --ignore=CHARSET ignoruj CHARSET bìhem výbìru pøevodní cesty\n" + +#: src/main.c:294 +msgid "" +"\n" +"Option -l with no FORMAT nor CHARSET list available charsets and surfaces.\n" +"FORMAT is `decimal', `octal', `hexadecimal' or `full' (or one of `dohf').\n" +msgstr "" +"\n" +"Parametr -l bez FORMÁTu nebo ZNAKOVÉ SADY vypisuje dostupná kodování.\n" +"FORMAT je `decimal', `octal', `hexadecimal' nebo `full' (nebo jeden z `dohf').\n" + +#: src/main.c:302 +#, c-format +msgid "" +"Unless DEFAULT_CHARSET is set in environment, CHARSET defaults to `%s'.\n" +msgstr "" +"Pokud je DEFAULT_CHARSET nastaven v systémovém prostøedí,\nimplicitnì je CHARSET do `%s'.\n" +
	Deleted	recode-3.6-22.el5.centos.src.rpm ^
	Added	recode-3.6-639.1.src.rpm ^
	Renamed	recode-3.6.tar.bz2 ^